This is a battery holder for 20 1S Lipo batteries. This is perfect for whoop 1s batteries in the 300-700mah range. Have plenty of batteries ready. Print one for charged and discharged batteries. F

Try this

It holds 22 "ciggs" and has a sliding top that's locks in with a click. Can be used as an alternative storage box as well. I recommend printing with stronger materials. I used Carbon Fiber PC, but yo

3D MODEL DESCRIPTION Stackable storage cases for either Nintendo switch, SD or micro SD cards. Small and simple design. Clicks when rotating the wheel and your stored items pop up out the opening, h

This is a remix of this item: https://www.thingiverse.com/thing:5217074 with a new lid with the Pokemon logo.

Hey friends, So this is the anticipated V2 Airpods Pro Milwaukee Case. Here are several Changes I made: The "Posts" on the corners now print seperately and are installed after the print is finished

This is a print in place SD card holder. It uses cone hinges and has a latch so it can snugly snap into place when you close it. It can hold 4 SD cards and 8 Micro SD cards. This SD card holder is esp

Discover a highly detailed 3D model of a mini Milwaukee Packout Design Case available on thangs.com. This replica perfectly captures the essence of the full-sized Milwaukee case showcasing seamless de

A new and improved case for the Raspberry Pi 5. Print in PETG or other high grade material, the pi generates a lot of heat. Orient the parts to print without supports, use a brim to stop curling, and

Hands down the best 3D printable phone case for your iPhone 13 pro. I have been working on the design since the release of the phone, slowly tweaking it to get the fit just right. **3D Printing Filam

This is a stand alone holder for the Ender 3 (pro) display. Makes use of the same standard screws. Uploaded the STEP file. Works with for example Fusion 360 and you can alter/ change to STL from ther

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5322224. There are many options here, choose as per your need only bottom cover only bottom cover with mounting holes

A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference

A small case for storing six Micro SD Cards. Size: 4.9 x 4.4 x 3.2 cm Print time: 2 - 3 hours Weight: 15 - 25 grams Print settings: 0.4 mm nozzle 0.3 mm layer height Infill 10% Speed: 35 - 45 mm

I have been doing a bit more 3d modeling and wanted to design my own case for the Raspberry Pi 2 Zero. I will be using a few of these with Octopi. The Pi will snap in place on the standoffs and the

Raw STEP file of the best fitting 3D printable case for the iPhone 13 Pro. Add your logo or change this design in any way you see fit Please respect the Creative Common License (no commercial use).

I really wanted a Joy Con case for my phone to use when emulating games, and I saw a lack of options, so I modeled one up super quickly, enjoy! Print settings: 0.3mm layer height 15% infill Supp

This is a SD card holder for six SD cards and another six micro SD cards. A save place for up to 12 TB of data ;-)

Case for a Rasperry Pi Zero with Waveshare V3 and PiSugar 3. The distance between the Raspberry pi and Waveshare is about 6mm. Case has the side buttons of the PiSugar available.

Get the most robust and efficient 3D model for your Pinecil Soldering Iron from thangs.com. Created by the renowned designer Never Not Exhausted, this 3D model acts as both a carry case and a portable

A case for the LilyGo T-Beam Lora Circuit including buttons. You need only 2 screws 2mm x 3mm.

**A print-in-place case for your glasses or sunglasses. ** I used to break my sunglasses several times a year because I just stuffed them into my bag – so I designed a case to protect them. The Design

Discover the highly detailed 3D model of a Stackable model of a Stackable Shipping Container for Trading Cards on thangs.com. Conceptualized by 3D Mieks, this functional organizer is meticulously desi

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4924215. This is a smell-resistant case for your papers, lighter and weed. It fits a clipper lighter and 1 1/4 inch pape

This item is for use with the #GridFinity system by Zach Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8 Say hello to the GFpi, a 2x2x3/4 Gridfinity module that holds a Raspberry Pi Mod

An insert for dewalt and craftsman bit cases to hold a complete 1/4 inch ratchet set. Will fit in the old style Dewalt cases as well as the new Tstak and Versastak cases.

Discover a unique, functional 3D model on thangs.com - A meticulously designed Milwaukee Packout airpods case, perfect for Apple Airpods Pro. Serving both as an aesthetically pleasing accessory and a

It's an elegant portable pencil case. You can keep 3 different size pen or pencils in it. It's Support free model. Model size is : 190x48x20 . Check this video to see how i printed it : https://yout

iphone 14 case

This is a battery case for 18650 li-ion batteries. Savely carry your batteries and know witch ones are fully loaded by inserting the empty ones the other way round.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4742032. Ender 3 V2 enclosure If you plan to make this, I don't take any liability if you hurt yourself, working with

This is a case for the Flipper Zero WiFi Devboard, that also works with the silicone case for the Flipper Zero. You'll need two M2.5x10 screws to hold the thing together. If you have clear 1.75mm fil

A push fit clip designed to hold a small case. Fully parameterized Fusion360 file allowing the height and depth of the case to be defined, along with the radius of the corners (and more). Does not u

#BackToSchool This is like my other full size pencil case, but stubby and cute. This can be printed on any printer, and prints in seperate pieces and then all threads together in a satisfying way...

Iphone 14 pro case with dragon

***IMPORTANT NOTE: 3D printed stuff - including this case - is NOT food safe, as bacteria can and will stick in the tiny caveats of the print. Only use this temporarily. Use with dry toothbrush. Clean

space for 2 XT60 connectors as outputs

Samsung Galaxy S24+ case with physical buttons. The buttons have a .2mm gap on the top and bottom so they will be able to flex when pressed. I used a 95A TPU to print the case is meant to be a tight f

Case for an ESP32 NodeMCU DevKIT. Stand offs inside raised enough the breakout pins can be left on. A generous cutout allows for different shaped usb plugs and airflow.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6341461. My first blender project was this remix of Malolo's awesome case. Unfortunately his customizer did not include a

Samsung Galaxy S21+ case with physical buttons. The buttons have a .2mm gap on the top and bottom so they will be able to flex when pressed. I used a 95A TPU to print the case the case is a tight fix

MOLLE version of RTL-SDR dongle case.

So i got a flip 3, nice little phone, bit more faster than the pixel 5 and guess what... it bends in half.... no way.... So feeling rather like a 1980's Shatner right here, looking like a total knob a

This is a 5x3 block to hold the iFixit Mako kit in the bottom have of its case. I wanted to retain the bit labels and make for easy transportation of the kit. After printing the one in the photos the

This is WIP! I'll post more links and instructions soon. this case was designed to for my raspberry pi 4 and Osoyoo 5 inch screen to my Creality ender S1 printer (on the front left side) to run Klip

A case for the Pine64 Pinecil V2 Soldering Iron. Uses 5x3 Magnets to close: https://www.amazon.com/gp/product/B0936M3WPK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

This is just a simple AirPod case for 1st and 2nd generation cases.

Iphone 14 pro case

A carrying case that holds up to 27 Nintendo Switch cartridges. Parts were printed on my X1-Carbon and Elegoo Neptune 4 Pro with 5% infill, 2 walls, and a .2mm layer height. All parts except for the

I printed the case using TPU and I used translucent PETG for the back panel. I just used all of the regular settings on the Bambu P1P printer and it worked great. I had some stringing with the TPU, bu