This is a zero infill marker holder / marker stand for common permanent makers 13mm or smaller diameter. 

Prints in less than 10 hours on most printers with .4 nozzle and .2 layer height.  Prints in half that time with a .6 nozzle and a .333 layer height.  Sturdy and unique design. 

This holds 30 markers each.  Allowing you to create groups based on colors or tone.  Optimizes your color workflow. 

The main model image was printed in color changing PLA.  https://amzn.to/3WGIO4h

0% INFILL!! - Marker Holder - Marker Stand

This spool mount comes in two versions.  Single piece (you'll need to print on another printer) or multiple pieces that prints on a KPS3 and you'll need to screw it together.  M3 screws are used for assembly (I also recommend some glue).  M5 and T-Nuts are used to attached to the top of the KPS3.  

This spool holder aims to put the weight of the spool directly down  so it does not cause vibrations when printing.  I've been using this since I got the printer and works very well.  

PRINTING: 
If printing the AIO mount print the top against the build plate.  No Supports are necessary. 

LICENSE TERMS: 
Please click the link and read the terms and requirements carefully before using in a commercial setting.
https://creativecommons.org/licenses/by-sa/4.0/
Attribution — You must give **appropriate credit**, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Kingroon KPS3 Spool Mount

Spool Mount (Single Piece).stl

This is a battery holder for 20 1S Lipo batteries.  This is perfect for whoop 1s batteries in the 300-700mah range.  Have plenty of batteries ready.  Print one for charged and discharged batteries.  Fits nice and neatly into your drone go bag. 

1S LiPo Battery Case Whoop Batteries

This is an 8 slot Batter Case for they very common 5V USB Batteries you find in discount stores.  These batteries hold a good charge and are great for mobile sensors, charging phones, etc.  This holder allows you to store charged batteries ready for replacement at any time. 

USB Battery Case

This is a tripod ground spike you can use to place a camera in the ground anywhere.  You'll need 1 brass insert for each spike 
https://amzn.to/3apQlAQ
and you'll also need a 1/4" adapter to your camera like https://amzn.to/394nvFL . 

Simply print the part, then use a soldering iron to SLOWLY insert the brass insert.  Allow to cool for at least 30 minutes.  Don't touch it at all while cooling. 

Once cool you can mount any camera, webcam or other device that uses a 1/4-20 thread.  

What do I use a tripod ground spike for?
- attach a trail cam, for ground level action
- attach a gopro and capture video of your golf swing, hitting the ball, etc.
- Great for small cameras at kids baseball games, etc. 
- Hold the camera in the sand on the beach

These spikes will cost you around $20 on amazon but the 3D print at 100% infill is only 39g and very strong. 

Tripod Ground Spike

Tripod Ground Spike.3mf

Tripod Spike v5.step

This imperial inspired gridfinity enclosure is part of the May The 4th Series 
https://youtu.be/Vo-mQe38-Bk

This prints in place!  Do not print the pieces separately. 

This works with #Gridfinity but also works as an empty box or you can design your own insert.

Check out my patreon page for https://www.patreon.com/makersmashup
patreon only models on this same motif.

Gridfinity Enclosure - Imperial Inspired

Body1

Body63

Body66

This rebel inspired gridfinity enclosure is part of the May The 4th Series https://youtu.be/eI3isiEgsv0 

All pieces snap into place with the exception of the hinge pin.  The hinge pin requires a small paper clip to be straightened and then inserted into the print.  That holds the lid to the base.  

This works with #Gridfinity but also works as an empty box or you can design your own insert.  

Check out my patreon page for https://www.patreon.com/makersmashup
patreon only models on this same motif.


Gridfinity Enclosure - Rebel Inspired 

Base.stl

See these in action at https://youtu.be/qVXg8pm2KOs
These are vase mode prints that turn into amazing LED Channels for your 3d printer or any aluminum extrusion (v and t slot!).

Consider following my channel and becoming a patron to support my work.

Mind Blowing LED Light Channels

LED 2020 Mount - Profile Trapezoid Sawtooth.3mf

Spring clean and organize your batteries.  An easy to print Rechargeable Battery Case that prints in a few hours.  This was printed with 0% infill.  Your printer should easily bridge the top spaces.  

This fits common "Rounded" USB rechargeable batteries.  



Rechargeable Battery Case - Spring Cleaning #MakerMadness

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4329631.

While I try to keep this set of files up to date the repository always has the latest model files: https://bitbucket.org/makersmashup/x301-models/src/master/STL/
***
These are the models for the LayerFused X301 open source printer.  

If you don't have a 3D Printer you can purchase these models already printed at
https://shop.layerfused.com/collections/featured/products/x301-printed-parts-kit


The first build video can be found here https://youtu.be/1UX8DlmzmM0

The video series is available at 
https://www.youtube.com/playlist?list=PLyYZUiBHD1QgZ4tn9tMU3Z-l71JyhPW9l

Part printing guide available at 
https://wiki.layerfused.com/en/X301/printing-guide

The bill of materials is available at
https://docs.google.com/spreadsheets/d/1BkFmqMdLik8-B1qxVCviEUmhcazlHoreDtXW5ndriQE


LayerFused X301 CoreXY Printer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4967546.

These solder and wire spool holders come in two pieces. Simply print the base mount and the size shaft you need.  Then assemble them with a quick M3*14mm screw.  Holds spools on pegboard and makes wire or solder access quick and easy.  Featured in my organization video https://www.youtube.com/watch?v=46dk_y27HCs

Pegboard Solder & Wire Spool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5027173.

Today we explore the use of an ESP32-CAM (ESP32 with Camera) as a directional motion sensor.  While motion sensing with an ESP32 has been available for some time, I take it to the next level using it in an animatronic Halloween project.  The project uses only an ESP32-CAM as the entire motion detector and the microcontroller driving the stepper motors.  The entire project is open source allowing you to use this in robotics or other projects where you need a cheap and easy motion sensor.  This project is limited only by the visual range where many PIR and Ultrasonic sensors have a limited range.  This works great for projects where you want to detect a cold object (not a living body) or objects far away.  The base code uses a 10 degree range for its stepper movement but you can alter the code and the way the project works to fit your specific needs.  I also cover how you can purchase an inexpensive IR Floodlight to enable the use of this at night or in low light situations.  This worked great as a Halloween animatronic project where a spooky inflatable eye follows you around the yard. 

https://www.youtube.com/watch?v=NIbiG6at01g

Used in this project: 
eSun Black PLA - https://www.amazon.com/eSUN-1-75mm-Printer-Filament-2-2lbs/dp/B01EKEMDA6?cv_ct_cx=esun+black+pla&dchild=1&keywords=esun+black+pla&pd_rd_i=B01EKEMDA6&pd_rd_r=78dd6800-c6ac-4e89-9346-b2d617903929&pd_rd_w=f4jhQ&pd_rd_wg=exdHn&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=Z2TRXHGP1B1892GA96QG&psc=1&qid=1634843829&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&linkCode=sl1&tag=rwmech-20&linkId=b6692b8dba9b24f305952f9ac2112913&language=en_US&ref_=as_li_ss_tl
ESP32-CAM - https://www.amazon.com/eSUN-1-75mm-Printer-Filament-2-2lbs/dp/B01EKEMDA6?cv_ct_cx=esun+black+pla&dchild=1&keywords=esun+black+pla&pd_rd_i=B01EKEMDA6&pd_rd_r=78dd6800-c6ac-4e89-9346-b2d617903929&pd_rd_w=f4jhQ&pd_rd_wg=exdHn&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=Z2TRXHGP1B1892GA96QG&psc=1&qid=1634843829&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&linkCode=sl1&tag=rwmech-20&linkId=b6692b8dba9b24f305952f9ac2112913&language=en_US&ref_=as_li_ss_tl
Signal Cable (Dupont) - https://shop.layerfused.com/collections/electronics/products/2m-premium-3d-printer-cable-female-dupont-to-female-dupont-6-pin-24awg
Stepper Motors - https://www.amazon.com/eSUN-1-75mm-Printer-Filament-2-2lbs/dp/B01EKEMDA6?cv_ct_cx=esun+black+pla&dchild=1&keywords=esun+black+pla&pd_rd_i=B01EKEMDA6&pd_rd_r=78dd6800-c6ac-4e89-9346-b2d617903929&pd_rd_w=f4jhQ&pd_rd_wg=exdHn&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=Z2TRXHGP1B1892GA96QG&psc=1&qid=1634843829&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&linkCode=sl1&tag=rwmech-20&linkId=b6692b8dba9b24f305952f9ac2112913&language=en_US&ref_=as_li_ss_tl
Dupont Terminal Blocks - https://www.amazon.com/eSUN-1-75mm-Printer-Filament-2-2lbs/dp/B01EKEMDA6?cv_ct_cx=esun+black+pla&dchild=1&keywords=esun+black+pla&pd_rd_i=B01EKEMDA6&pd_rd_r=78dd6800-c6ac-4e89-9346-b2d617903929&pd_rd_w=f4jhQ&pd_rd_wg=exdHn&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=Z2TRXHGP1B1892GA96QG&psc=1&qid=1634843829&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&linkCode=sl1&tag=rwmech-20&linkId=b6692b8dba9b24f305952f9ac2112913&language=en_US&ref_=as_li_ss_tl
USB Power Interface - https://www.amazon.com/eSUN-1-75mm-Printer-Filament-2-2lbs/dp/B01EKEMDA6?cv_ct_cx=esun+black+pla&dchild=1&keywords=esun+black+pla&pd_rd_i=B01EKEMDA6&pd_rd_r=78dd6800-c6ac-4e89-9346-b2d617903929&pd_rd_w=f4jhQ&pd_rd_wg=exdHn&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=Z2TRXHGP1B1892GA96QG&psc=1&qid=1634843829&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&linkCode=sl1&tag=rwmech-20&linkId=b6692b8dba9b24f305952f9ac2112913&language=en_US&ref_=as_li_ss_tl
Micro USB Cables - https://www.amazon.com/eSUN-1-75mm-Printer-Filament-2-2lbs/dp/B01EKEMDA6?cv_ct_cx=esun+black+pla&dchild=1&keywords=esun+black+pla&pd_rd_i=B01EKEMDA6&pd_rd_r=78dd6800-c6ac-4e89-9346-b2d617903929&pd_rd_w=f4jhQ&pd_rd_wg=exdHn&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=Z2TRXHGP1B1892GA96QG&psc=1&qid=1634843829&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6&linkCode=sl1&tag=rwmech-20&linkId=b6692b8dba9b24f305952f9ac2112913&language=en_US&ref_=as_li_ss_tl


ESP32-CAM Animitronics

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4276219.

Jumbo Sized Heated 3D Printer Filament Dry Box / Hot Box.  If you have many spools a filament and are struggling to keep them dry and climate controlled this video will show you how to use a storage tub and a few other parts to keep things fresh!  The dry box contains a heater to keep the filament warm along with desiccant and a PID controller for the heater.  Store 30 rolls or more of filament in just one box! 

You can watch the video on how this box was made here https://youtu.be/U3ehUxdZyv8

The following parts were used to make it, You'll need to source your own jumbo box. 

PTC Heater
https://www.amazon.com/gp/product/B07BJWJQLK/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=12a30bd7108171d79f237ffcd64c3484&language=en_US

PID Controller
https://www.amazon.com/gp/product/B07BJWJQLK/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=12a30bd7108171d79f237ffcd64c3484&language=en_US

Ferrule Tool
https://www.amazon.com/gp/product/B07BJWJQLK/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=12a30bd7108171d79f237ffcd64c3484&language=en_US

Humidity Sensor
https://www.amazon.com/gp/product/B07BJWJQLK/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=12a30bd7108171d79f237ffcd64c3484&language=en_US

PC Fan
https://www.amazon.com/gp/product/B07BJWJQLK/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=12a30bd7108171d79f237ffcd64c3484&language=en_US


Heated 3D Printer Filament Dry Box / Hot Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3927594.

I created this $10 IP Camera which allows you to use it for Octoprint (Or just a security camera) instead of a wired USB camera.  USB has a limit of the number of web cams it can support with the bandwidth of the USB Bus.  This IP Camera does not have that limitation and works perfectly with Octoprint. 

I have a complete how-to video on how to get it running here https://youtu.be/6qiH1BRwUeA?sub_confirmation=1

It uses a $10 ESP-32 Cam development board which works wirelessly. 

SOURCE CODE to the Firmware
https://www.makersmashup.com/downloads/9f1c1e46-5636-47b1-b3cc-13178671620f

ESP32-CAM
https://amzn.to/32z7O0L

Serial to USB Converter
https://amzn.to/2pFbPCs

5v Buck Converter
https://amzn.to/2J51Htk

Micro USB Breakout
https://amzn.to/2NabW0X

Crimper Tool & Connectors
https://amzn.to/2MwPxvt

Jumper Wires & Breadboard
https://amzn.to/35TpR3J


If you enjoy this consider subscribing to my YouTube Channel to help support future work like this.  

$10 Wireless IP Webcam for Octoprint (Uses ESP32-CAM)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4853261.

Based on my video https://youtu.be/x_K3h05tQXc this is many different DIN Models I developed as part of my 3D Printer Test Bench.  This is an ongoing project and I will add additional models as I continue this project.  

The main stand is available at https://www.myminifactory.com/object/3d-print-din-rail-stand-xl-96231

3D Printer Test Bench & DIY Electronics Models for DIN Rails

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4966856.

These models can be seen in action here https://youtu.be/46dk_y27HCs

This bag hanger comes in various block sizes but uses the same clips.  The 3D Print uses a chamfer so even an uncalibrated printer should be successful in printing these.  Use horizontal expansion to reduce the hook size if you find its too tight to press into the block.  Most printers wont have any problem with default slicer settings. 

The bag hangers allow you to take any zipper based plastic bag and hang it up on a pegboard or hook.  Organize your workshop, garage or classroom with these bag hangers.  You can watch an entire video on how these bags can be used for anything and a single hanger can hold 4 pounds or more!

Print as-is no supports are required.  .6 nozzles print this extra fast! If you choose to have heavy weight in your bags please use a smaller .15 layer height for extra strength. PLA filament works great.  I printed these in eSun orange https://www.amazon.com/gp/product/B01EKEMA2M?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=384670947fdd94c3327e57a72583ae0b&language=en_US&ref_=as_li_ss_tl 

Bag Hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4762541.

These files go with the DIY Laser Engraver Video series by MakersMashup. 
You can use whatever diode laser you like for this build and can easily modify the mount in tinkercad. STEP and other files will be available soon for download as this is an open source project. 

Part 1 https://www.youtube.com/watch?v=EiLW0ShoJSo
Part 2 https://www.youtube.com/watch?v=jlRYsr-DPnw

Bill Of Materials: https://docs.google.com/spreadsheets/d/1941MX_unygXKNyOXyYuebtPZSNTEd63eybxU7UnPC10/edit?usp=sharing
Firmware Repo: https://bitbucket.org/makersmashup/workspace/projects/LL

DIY Laser Engraver | LayerFused L301

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3894507.

This is the LayerFused C201 printer.  This printer is open source and all the parts can be found online here.  This was put together as a video series of how to build your own 3D printer with step by step instructions.  The printer was built by my Nephew as I showed him how a 3D printer was built.  Most people should be able to follow the series and make the printer or a similar build with these videos.

These are only some of the 3D Printed parts for it. Others are here on Thingiverse and linked in the [Bill of Materials](https://docs.google.com/spreadsheets/d/1ZE9ie_5OYdCFkesfaq6oUkoeBMCPePK8aXwo8m5GgxU/edit?usp=sharing)

The printer can be made for around or under $200 if you source/substitute cheaper parts. 

[DIY 3D Printer Build Series](https://www.youtube.com/playlist?list=PLyYZUiBHD1QjaYx7eCEW8zXvsgwEbAykY)

The first episode of [DIY 3D Printer Build](https://www.youtube.com/watch?v=EX62plOF-So) video.

Update 11/17/2019 - Thanks to Lando for pointing out the stop button was missing.  It was added to the archive.  Also there was a missing model in the Bill of materials that was updated as well.  

Update 10/22/19 - Added Foot Pads and offset blocks.  Updated Display case to fix bug in design. Added document to link to all the models and can be downloaded in various formats. 


LayerFused C201 3D Printer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3564504.

3D Printer owners know that from time to time a print goes bad and filament attaches itself to the nozzle.  I have seen many nozzles where plastic has baked on over and over again.  My nozzle stays squeaky clean thanks to a nozzle brush I created based on a nozzle brush my friend Jesse was using from the Colorado Printing Project.

The idea came about at a Maker Faire when he was talking about the nozzle brush he obtained at a MRRF.  The material in the brush he claimed was the best out there. It reminded me of the felt moving pads that often come with your rental truck.  From there I went on a hunt to find something that would make the ultimate nozzle brush.  I found that Amazon carried the moving pads but they were costly and far more than I would have needed for 1000 nozzle brushes let alone the few I was going to produce.  I settled for [these felt pads](https://amzn.to/2UCEVRu) that proved to be outstanding for this nozzle brush.  

Print this with the square hole face down.  The printer should be able to bridge the gap across the top of the hole without issue.  You need no supports.  After printing fold two of the 1" squares in half, place that in the square hole.  The other side place one square flat.  

Filament will stick to the pad.  It is easy to pick out and the pads are easy to replace.  Much better on your fingers than a wire brush.

You can read the complete article on [my blog](https://www.makersmashup.com/post/ultimate-nozzle-brush) or watch the [video](https://www.youtube.com/watch?v=2v08Phbnmwg)

If you print this post a make!  If you like this share with a friend!  If you want me to make something else cool message me!

Need more help building this?  Want to discuss it?  I can be found on my  [public discord chat server](https://discord.gg/WSm2YKV).  Glad to answer any questions you have.

### Suggestions?
If you have suggestions for me to build please message me.  I'm always looking to build something exciting and new.  You can message me here on Thingiverse or contact me through [My Blog](https://makersmashup.com) or my [Youtube Channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ/)

Ultimate Nozzle Brush

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4082937.

This is a very minimalist DIY Fume Extractor.  You only need a few parts to put this together. The prints should take about 3 hours total to print everything and then you can assemble it.  The assembly video is here https://youtu.be/IyjuDWjKk_U

You need 4, 40mm or 45mm M3 Screws depending how you assemble it.  

120mm Case Fan
https://www.amazon.com/APEVIA-CF12SL-UBL-120mm-Molex-Motherboard/dp/B001NGMRAG/ref=as_li_ss_tl?keywords=120mm+case+fan&qid=1578093334&refinements=p_85:2470955011&rnid=2470954011&rps=1&sr=8-31&linkCode=sl1&tag=rwmech-20&linkId=c5df3babd3851ad90a3d22870010761c&language=en_US

USB Boost Module
https://www.amazon.com/APEVIA-CF12SL-UBL-120mm-Molex-Motherboard/dp/B001NGMRAG/ref=as_li_ss_tl?keywords=120mm+case+fan&qid=1578093334&refinements=p_85:2470955011&rnid=2470954011&rps=1&sr=8-31&linkCode=sl1&tag=rwmech-20&linkId=c5df3babd3851ad90a3d22870010761c&language=en_US

Carbon Filter 
https://www.amazon.com/APEVIA-CF12SL-UBL-120mm-Molex-Motherboard/dp/B001NGMRAG/ref=as_li_ss_tl?keywords=120mm+case+fan&qid=1578093334&refinements=p_85:2470955011&rnid=2470954011&rps=1&sr=8-31&linkCode=sl1&tag=rwmech-20&linkId=c5df3babd3851ad90a3d22870010761c&language=en_US

Follow us on YouTube at https://youtube.com/MakersMashup

Please consider helping support the channel through Patreon
https://www.patreon.com/makersmashup

Follow me on Twitter: https://twitter.com/MakersMashup
Instagram: https://instagram.com/makers_mashup/
Visit our website www.MakersMashup.com



DIY Fume Extractor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4149850.

This is a 2020 Extrusion Neopixel light bar you can use with a 3D Printer.  

This light bar goes with the YouTube video at https://www.youtube.com/watch?v=SoAcZDXzd00 where we install Neopixels into the SKR V1.4.
We first wire the Neopixels and then cover installation and configuring Marlin.  We show how Neopixel LEDs trigger and display when heating. I also go into the Marlin M150 command and how you can modify your startup or other gcode to change the Neopixels to any color.  This is a very simple project for any BigTreeTech SKR v1.4 owner.  


Light bar 3D Print
https://www.thingiverse.com/thing:4149850

Neopixel Reel
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US

Resistors Assortment (which includes the 330 ohm resistor)
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US

Capacitor Assortment (which has the 1000uF capacitor)
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US

Heat Shrink Tubing Assortment
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US

Ribbon Cable
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US

Crimping Tool
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US

Mainboard Connectors
https://www.amazon.com/gp/product/B018XAELE4/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=9cd7d313b8f20f7183d098027a088c22&language=en_US



Neopixel Light Bar for 2020 extrusion

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3860988.

This is a quick adapter ring I created to hold the original 775 Motor after upgrading to the hand router mount.  https://www.thingiverse.com/thing:3697793

Now I have the flexibility to use the original 775 or the hand router depending on use case. 

CNC 775 Motor Adapter Ring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3624545.

I was amazed how few endoscope mounts were out there and how few were really good.  Endoscopes will help you identify layer issues, print failures and are just plain fun to watch.  Please checkout my [YouTube video on this Endoscope mount](https://www.youtube.com/watch?v=sGztU4zJugE) and please subscribe if you enjoy things like this. 

This is an endoscope mount for the Ender 3 and similar Creality printers that have the same front fan shroud.  This mount does not interfere with the fan and allows air flow through.  It mounts to the front which is generally unused space on the Ender 3.  

This will print without supports. Just lay it on its side just like the photo.  Once you have it printed you will need 1 M3*12 screw as the stock screw you may find is a little short.  You should have this spare screw in with your ender spares. 

Simply remove the single fan screw, install this mount and attach the endoscope to the mount.  It is designed to get tighter as it goes further in so it should support multiple types of endoscopes.  They vary widely on amazon.  I have tried a few and any that have a 9mm or smaller camera should fit with this mount.  I have listed a few versions below.  If you check out the video I show you how to hook it up to OctoPrint but you can also use your phone directly or with WiFi.  

Cheap one that gets the job done (tested myself): https://www.amazon.com/gp/product/B07DBX527F/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=ebef2c75523966eed91c50c450015ab1&language=en_US
Version I personally use: https://www.amazon.com/gp/product/B07DBX527F/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=ebef2c75523966eed91c50c450015ab1&language=en_US
WiFi Camera with much better quality: https://www.amazon.com/gp/product/B07DBX527F/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=ebef2c75523966eed91c50c450015ab1&language=en_US

Again I think just about any endoscopic camera less than 9mm will work.  

The rc.local.txt file is for Octoprint installs, see the youtube video for details. 

Need more help building this?  Want to discuss it?  Want a custom mount for your setup?  I can be found on my  [public discord chat server](https://discord.gg/WSm2YKV).  Glad to answer any questions you have.

Please post your makes and let me know if you'd like me to make more models like this.

### Suggestions?
If you have suggestions for me to build please message me.  I'm always looking to build something exciting and new.  You can message me here on Thingiverse or contact me through [My Blog](https://makersmashup.com) or my [Youtube Channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ/)


Endoscope Mount for Ender 3, CR-10

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3617480.

This is my clip on umbrella light.  There are 4 versions of this clamp inside.  There is a tilted and straight version both with a solid or open bottom.  They will light up your patio umbrella and look spectacular.

The "Open" version on the bottom use these special [remote controlled LED tea lights](https://www.amazon.com/gp/product/B07MFXSGQ2/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=32807236824747434c36d4bd2523c956&language=en_US).  They simply press into the bottom but have the advantage of being remote controlled with various color options with a dedicated white LED.   

You can point these up or down the umbrella pole depending on the light you need. 

The other version has a closed bottom so you can place any sort of tealight in it.  I have used [these tea lights](https://www.amazon.com/gp/product/B07MFXSGQ2/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=32807236824747434c36d4bd2523c956&language=en_US) successfully on many projects and they are very inexpensive. 

I printed these at 100% infill with supports.  The supports break off.  The 100% infill on the clear holders transfers the light much better. 

[See this light in action](https://youtu.be/FzKfk7of3gM)

Need more help building this?  Want to discuss it?  I can be found on my  [public discord chat server](https://discord.gg/WSm2YKV).  Glad to answer any questions you have.

### Suggestions?
If you have suggestions for me to build please message me.  I'm always looking to build something exciting and new.  You can message me here on Thingiverse or contact me through [My Blog](https://makersmashup.com) or my [Youtube Channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ/)

Umbrella Light for your Deck or Patio

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4749031.

This test ring was featured in the YouTube video on Arc Welder https://youtu.be/18uYYXecH5g

Arc Welder modifies your gcode to convert line segments to arcs that most firmware can understand.  The test ring was used in the videos and you can use it to test the results against the video.  Cura 4.6 generated gcode was compressed 95% by converting line segments into arcs with this test object. 

For more information on ArcWelder

Octoprint Plugin Arc Welder https://plugins.octoprint.org/plugins/arc_welder/
FormerLuker Github: https://github.com/FormerLurker
Arc Welder Lib (Command Line Version) https://github.com/FormerLurker/ArcWelderLib


Arc Welder Test Ring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3665614.

Don't have a runout sensor? Can't install one? Then RunoutAnywhere is for you!  Simply print the case, solder a microswitch to a microcontroller and you're done.  [See the video here on how this works](https://youtu.be/dn2Pl7ypKQ4).

The RunoutAnywhere project is a Universal Wifi Filament Runout Sensor that works with OctroPrint.  When it detects filament runout it sends an API call to OctoPrint to pause your printer.  It costs about $5 to build one.

This project was designed to be very simple to build, low cost and an easy beginner project.  Once you solder the switch directly to the board you will need to configure the software with your OctoPrint URL and API Key.  After it is configured simply burn it to the board and you are ready to go.  Can easily be completed in an hour or less (once the model is printed).  

The case was designed so you can zip tie it.  The nice advantage to that is if you have multiple printers you can swap the runout sensor as needed without having one for each printer. 

WeMos style ESP8266 Board I used
https://amzn.to/2Icmmuf

Limit Switches Used
https://amzn.to/2JP54H1

Source Code For WeMos
https://bitbucket.org/rwmech/runoutanywhere/

Filament I used to print this in
https://amzn.to/311fQzk


Universal Portable WiFi Filament Runout Sensor - RunoutAnywhere 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3601800.

This is a flag clip that will keep your flag attached to the rod and keep it from moving.  My wife had lost one of the flags she had and asked if I could create something to keep it in place.  This works perfectly.  I printed these in TPU however you could easily use PLA as well.  The TPU has the added flexibility so they seemed to hold on quite well.  The rod is a 5mm rod that they attach to.  You can easily resize these large or smaller in the slicer to fit your flag rod. 

[Printed in Flexible TPU](https://www.amazon.com/gp/product/B00VKSCMTS/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=b0258e873413334795d0de5fa10c51af&language=en_US)

Flag Bar Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3407237.

A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iid0aKuwVYJ

NodeMCU ESP8266 Case Rev1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5261437.

Today I am introducing the filament calibration cylinder.  Calibrate your filament for more precise prints.  This calibration test will allow you test and calibrate important settings such as flow compensation, cooling, and horizontal expansion.  This test prints quickly and makes calibrating your filament and print fun.  Print the cylinder at 0% infill, 3 walls and use cooling at 100%.  Your 3D Printer will be happy you calibrated it. 

See it in action here https://www.youtube.com/watch?v=SJdj-EQCM7c


Filament Calibration Cylinder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3597158.

This can be a very difficult torture test.  It includes a number of different test in it. **Start at 50% size**

Overhang test on the bottom. 
Span test across the back
60mm Cube size tolerance
Multiple circles tolerance
Stability printing inverted cone.

The print was designed so you can make it larger or smaller.  This example is printed at 50%.  I suggest you start out at 50% because it will print considerably faster.  If you print the full size cube you do get a much better span test on the back but its harder to print the inverted pyramid on the inside.  You can print this with zero infill and I was successful at 50% however its more difficult at 100%.  Concentric infill is very difficult at 100% size due to lack of supports in the internal cone.  Triangle infill at 1% works great and doesnt increase time significantly.  

Expect to have a failure or two.  I would love to hear about what printers this works on and what your settings were. 

To date the large version 100% I have printed in as little as 1.5 hours at .3mm with an Ender 3.  

This uses the [Makers Mashup](https://makersmashup.com/) logo from my blog and [YouTube channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ). 

Printed on [AIO PLA Filament](https://amzn.to/2GScfez)

Thanks to Mekius for the suggestion to build this cube.

Need more help building this?  Want to discuss it?  I can be found on my  [public discord chat server](https://discord.gg/WSm2YKV).  Glad to answer any questions you have.

### Suggestions?
If you have suggestions for me to build please message me.  I'm always looking to build something exciting and new.  You can message me here on Thingiverse or contact me through [My Blog](https://makersmashup.com) or my [Youtube Channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ/)

Makers Mashup Torture Test Cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4188243.

Tostadas for your electronic projects!  These are project boards targeted at educators and STEM/STEAM teachers that allow you to organize your project work.  These project boards are magnetic and allow you to place project on any metal surface.  My YouTube video https://www.youtube.com/watch?v=xypabOyql3w covers how to put these together and shows how students use these in the classroom. 

These project boards allow you to keep student projects neat and organized in the classroom.  STEM teachers or Educators who work with Arduino, Raspberry PI and other embedded platforms will find these project boards I call Tostadas a great addition to their classroom.  The public domain project files allow you to also create boards of your own for any embedded electronics kit.  

**PLEASE REACH OUT TO ME IF YOU NEED A CUSTOM BOARD!**
*I am glad to create different sized ones and add them to the overall collection.*
If you would like to contribute a board you made to this project please reach out to me on thingiverse and I will add it to this collection. 
This project includes .STEP files as well as F3D files for fusion.  STL files are also included.


Steel Sheets
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US

Magnets for the Project Boards
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US

Hot Glue Gun
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US

Breadboards that fit the models
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US

Arduino Starter Kit
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US

Raspberry PI
https://www.amazon.com/M-D-Building-Products-56032-Galvanized/dp/B000W6ZMQY/ref=as_li_ss_tl?keywords=steel+sheet&qid=1582815017&sr=8-4&linkCode=sl1&tag=rwmech-20&linkId=1d1588c72e5177c848d8526eaa10fd8d&language=en_US


Magnetic Electronic Project Boards

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4524877.

Some soldering fingers I put together for the LayerFused X301 build video.  These work great with various sized wires.  

Soldering Fingers / Helping Hands

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4712966.

This is an open source Filament Runout Encoder which detects filament jams in addition to filament runout.  You only need a few parts for this project most of which can be found in your shop already. 

You can watch the video on how to assemble it here: https://youtu.be/v2mQ4X1J3cs

Bill of Materials
1 - 608 Skateboard Bearing : https://amzn.to/3oyXzEV
2 - M3 8MM Screws : https://amzn.to/3bgc8Jq
1 - M3 6mm Screw: https://amzn.to/3bgc8Jq
2 - M10 Press Fit Fittings: https://amzn.to/390PWQI
1 - Small Rubber Band
1 - Optical Filament Sensor: https://amzn.to/3nm6zf0
8 - 6mm x 3mm Magnets: https://amzn.to/2MFK4oK

Some short lengths of bowden depending on your build
https://amzn.to/393qbzo

Links to Download models of the project.  
https://a360.co/36g9PmD - Case back 
https://a360.co/39IIOc4 - Encoder Bearing
https://a360.co/39Tvz8u - Case Cover
https://a360.co/3p6UoUU - Case Cover Slanted


Runout En-Coder-Cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3567836.

Update 7/5/19 - These work great for night lights.  I used them in the hotel when we went on summer holiday.  Tired of walking around in a dark hotel room? One in the bathroom works great for an entire trip! Just turn it on before going to bed and the kids (and youre toes) will love it!

This 3D Printed LED Cube is quick and easy to make. These are fun for all ages and can be incredibly useful for accent lighting. Originally designed as a toy the more I printed these the more fun I had. In fact I printed an entire set just for myself.  I had to buy more filament because I used everything I had making all the fun cubes.  

Bill of Materials

* Ultimate LED Cube downloaded from Thingiverse
* [Color Changing LED Tea lights](https://www.amazon.com/gp/product/B079MCF2L6/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=11f8a6022ecf227536b3a105aecc0cc7&language=en_US) available from Amazon (although almost any should work)
* [Solutech Clear PLA Filament](https://www.amazon.com/gp/product/B079MCF2L6/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=11f8a6022ecf227536b3a105aecc0cc7&language=en_US)

Once you have everything you will want to print the model using the clear PLA.  I have printed these on PETG as well however the PLA seems to work a little better. 

Cura Print Settings

* 3 perimeter walls (for added strength)
* 5% infill using Triangles (gives it the star look on top)
* .3 mm layer height (prints it very fast)
* Print without supports.

Rotate the model or ensure that the hole in the cube is facing up. 

You can read more about this print on [my blog](https://www.makersmashup.com/post/led-cube-maker-mashup)

If you like this please share it.  If you print it please post a make! I love seeing my models in use!

Need more help building this?  Want to discuss it?  I can be found on my  [public discord chat server](https://discord.gg/WSm2YKV).  Glad to answer any questions you have.

### Suggestions?
If you have suggestions for me to build please message me.  I'm always looking to build something exciting and new.  You can message me here on Thingiverse or contact me through [My Blog](https://makersmashup.com) or my [Youtube Channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ/)

Ultimate LED Cube Accent / Night Light

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4793362.

This Emergency Stop Button Module allows you to use a standard power inlet and a standard outlet with a emergency stop button in the middle.  This works great for 3D Printers, Lasers or any number of power tools.  You can use this for just about anything electrical being mindful not to exceed the 10a rating of devices plugged into it. 

Assembly Video: https://youtu.be/U8_z71O2Cwc

Novelty use this for anything electrical!

Emergency Stop Button: https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl
Power Outlet (US) : https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl
Power Inlet : https://www.amazon.com/gp/product/B07R8PTTDX?ie=UTF8&th=1&linkCode=sl1&tag=rwmech-20&linkId=3ea6a1296a95472e935fbc1415aa81a2&language=en_US&ref_=as_li_ss_tl

You'll also need around 4 M3 8mm screws and some wire with fork connectors. 

Emergency Stop Button Module

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4524895.

Do you own one of those rectangle garbage cans where the bag wont stay in?  These clips I built will hold the bag in place so they don't fall in.  Pretty simple stuff and works great.  The clips are also rounded so you dont tear the bag putting the clips on.  2 Clips will hold the bag perfectly on the can. 

Trash Bag Clips for Square trash Can

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3413664.

Add a fun and retro look to your Ender 3D printer by sliding in these fun T-Channel characters.  Just remove the end cap and slide these in, no mounting necessary.  Stays out of the way but makes use of the empty space at the top of your printer.  

Retro Arcade T-Channel Art

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3414558.

Adding a little fun to your Ender 3D Pinter.  These mods for your printer are for the front faceplate and for the z-axis.  Simply print and place on.    It will cover up the Ender 3 Facebook QR Code.  You may need to tweak the front cover plate to make it shorter or longer depending on your print. Mine fit perfectly. 

Pac Man Ghost Mods

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3603712.

Need to transfer filament from one reel to another for a friend?  Want to split your filament onto another reel for a second printer? Then the Drill to Filament Reel Adapter is for you!  Not sold in any store this adapter fits directly on the end of your power drill (supports multiple sizes) and then inserts directly into your spool (also supporting multiple sizes).

I designed this after watching Angus' YT Video use a piece of foam in one of his recent videos.  I also wanted to share some filament with a friend and this works perfectly.  

I printed this in TPU and I suggest you do the same.  The TPU grips better than traditional PLA will.  [Here is the link to the filament I used.](https://www.amazon.com/gp/product/B00VKSCMTS/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=rwmech-20&linkId=03f27041255c803d1f67c4f06bcec599&language=en_US)

Since this is round if you don't have extrusion issues you can print this safely at 60-80mm/s I personally printed it at 80mm/s on my Ender 3 perfectly.

[You can watch the YouTube on this as well](https://www.youtube.com/watch?v=QNZgn_G2EuM)

Need more help building this?  Want to discuss it?  I can be found on my  [public discord chat server](https://discord.gg/WSm2YKV).  Glad to answer any questions you have.

### Suggestions?
If you have suggestions for me to build please message me.  I'm always looking to build something exciting and new.  You can message me here on Thingiverse or contact me through [My Blog](https://makersmashup.com) or my [Youtube Channel](https://www.youtube.com/channel/UCevttltfkZ76jwqfV1vrRbQ/)

Drill to Filament Spool / Reel Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4716450.

Get yourself some 1.5" velcro strapping and these clips will allow you to hang just about anything anywhere.  From garden hoses, cords and even bicycles!  Use these to hang duct work too.  Anything you can velcro now you can hang!

Velcro I used https://amzn.to/3owjkVL

See it in action https://youtu.be/a8cei7NFFnU

Velcro Hanging Clips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4524886.

This is a rather simple 3D print that allows you to screw this tube onto a large board to launch bottle rockets or hold an average roman candle.  

I take no responsibility for the use of this 3D Print always use good judgment when using legal fireworks in your area.

Bottle Rocket Launcher / Roman Candle Holder

Rob Mech, aka Makers Mashup is a YouTube Creator and maker.  Check out his Channel at [YouTube.com/MakersMashup](http://YouTube.com/MakersMashup/)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like