There are two files required.
1) First run the CHEP_M0_bed_level.gcode file on your Ender 3 or any similar size printer with an 8-Bit board V1.1.4 board. Adjust each corner by running a piece of paper or Filament Friday sticker under the nozzle until you can barely move it then click the LCD knob to advance to the next corner.

2) Then run the CHEP_bed_level_print.gcode file and live adjust or "adjust on the fly" the bed level knobs to get as close to a level bed as possible.
The print will continue multiple layers but you can stop the print at any time and then you are ready to 3D print without worrying about bed level.

I also include the CHEP_bed_level_print.stl if you want to slice it yourself.

More info in this video: https://youtu.be/_EfWVUJjBdA

**For Newer Ender 3 and Ender 3 Pro**
(Ender 3, Ender 3 Pro with V4.2.2 board)
Creality is now installing 32-Bit boards in the machine and running Marlin 2.0,x firmware. Some of these setups don't recognize the M0 command so I've created a CHEP_M25_bed_level.gcode version for these. It works the same but instead of just clicking the LCD knob you have to go into the print menu and select Resume Print to advance to the next corner.

CHEP Manual Bed Level for Ender 3 Size Printers

There are two files required.
1) First run the CHEP_M0_bed_level.gcode file on your Ender 3 or any similar size printer with an 8-Bit board V1.1.4 board. Adjust each corner by running a piece of paper or Filament Friday sticker under the nozzle until you can barely move it then click the LCD knob to advance to the next corner.

2) Then run the CHEP_bed_level_print.gcode file and live adjust or "adjust on the fly" the bed level knobs to get as close to a level bed as possible.
The print will continue multiple layers but you can stop the print at any time and then you are ready to 3D print without worrying about bed level.

I also include the CHEP_bed_level_print.stl if you want to slice it yourself.

**For Newer Ender 3 and Ender 3 Pro**
(Ender 3, Ender 3 Pro with V4.2.2 board)
Creality is now installing 32-Bit boards in the machine and running Marlin 2.0,x firmware. Some of these setups don't recognize the M0 command so I've created a CHEP_M25_bed_level.gcode version for these. It works the same but instead of just clicking the LCD knob you have to go into the print menu and select Resume Print to advance to the next corner.

CHEP Bed Level for Ender 3 Size Printers

Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Frame: https://a360.co/3ccHbsg
- Weighted Plate: https://a360.co/3uCJ2gR

The foundation of every Gridfinity setup is a baseplate, and these let you drop storage where you need it most.

**Frame**: The absolutely minimal no-frills baseplate. No room for screws or magnets, but saves filament and headroom. If your storage unit is on a steel surface, you can still put magnets in the storage blocks to keep them from sliding.

**Weighted**: Heavy, sturdy baseplate perfect for desktops, shelves, and other places where knocking stuff over is a big problem. 

Secure blocks permanently with [M3 screws,](https://amzn.to/37IaXTg) or temporarily with [6x2mm magnets](https://amzn.to/37Ihopq). Add [rubber feet](https://amzn.to/3LZv4v5) to keep the whole shebang from sliding, and [metal tire weights ](https://amzn.to/3uAzH9f)to drop the center of gravity and prevent wipeouts. You don't need to install every magnet, foot, and weight! Just use enough for your needs.

A Prusa i3 Mk3 can print up to a 5x5 grid. No matter what you use, make sure your bed adhesion and release is dialed in - these love to curl, and their high surface area can make them challenging to remove.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider plates can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Baseplates

Weighted Baseplate 3x2.stl

Frame 1x4.stl

Frame 1x5.stl

Frame 1x6.stl

Frame 1x7.stl

Frame 2x2.stl

Frame 2x3.stl

Frame 1x2.stl

Frame 1x3.stl

Frame 2x7.stl

Frame 3x3.stl

Frame 3x4.stl

Frame 3x5.stl

Frame 3x6.stl

Frame 3x7.stl

Frame 4x4.stl

Frame 4x5.stl

Frame 4x6.stl

Frame 4x7.stl

Frame 5x5.stl

Frame 5x6.stl

Frame 5x7.stl

Frame 6x6.stl

Frame 6x7.stl

Frame 2x5.stl

Frame 2x6.stl

Weighted Baseplate 1x3.stl

Weighted Baseplate 1x4.stl

Weighted Baseplate 1x5.stl

Weighted Baseplate 1x6.stl

Weighted Baseplate 1x7.stl

Weighted Baseplate 2x2.stl

Weighted Baseplate 1x1 (super cute).stl

Weighted Baseplate 1x2.stl

Weighted Baseplate 2x4.stl

Weighted Baseplate 2x5.stl

Weighted Baseplate 3x6.stl

Weighted Baseplate 3x7.stl

Weighted Baseplate 4x4.stl

Weighted Baseplate 4x5.stl

Weighted Baseplate 4x6.stl

Weighted Baseplate 4x7.stl

Weighted Baseplate 5x5.stl

Weighted Baseplate 5x6.stl

Weighted Baseplate 5x7.stl

Weighted Baseplate 6x6.stl

Weighted Baseplate 6x7.stl

Weighted Baseplate 7x7.stl

Weighted Baseplate 2x7.stl

Weighted Baseplate 3x3.stl

Weighted Baseplate 3x4.stl

Weighted Baseplate 3x5.stl

Get the new Extra Fast Cura Profile from Filament Friday. This Filament Friday Extruder top 3D print is just a fun example for using the new Filament Friday Extra Fast Cura Profile that is part of the .3mf file. This print took 37 minutes with the CHEP4.12_ 0.28(Rough) profile. The FF_0.28(Extra-Fast) Profile only took 23 minutes on Ender 3 Pro.
Just download this, unzip the files and then load the .3mf project file. When the project loads it will automatically add it to Cura for you to use.

Filament Friday Extra Fast Cura Profile

FFExtruderTop_ExtraFastProfile.3mf

Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at  
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file: https://a360.co/3vbu9B5

These are perfect for storing small parts and long, thin objects like needle files, and you can stack them as high as you want! The inner surface has a generous scoop to make retrieving parts easy, and the tab fits 12mm label-maker tape.

I've provided a selection of different sizes and divider counts, to give you OPTIONS! Note that none of the compartment sizes overlap - there isn't a two-compartment 4x1 bin because you can just use two one-compartment 2x1 bins.

Dimensions in file names are Width x Depth x Height. Width and Depth units are 42mm grid slots, Height is in 7mm units. A Prusa i3 Mk3S can fit a five-unit-wide bin on its plate.

Note that two-unit-high bins don't have labels - they would cut too far into the usable storage area.

Brims and support are not required, and these can be printed in any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big!

**Gridfinity Tips!**
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Divider Bins

Divider Box 2x1x6 5-Compartment.stl

This is my latest Cura Good Profile (0.20 layer height) for Cura version 5.0.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

Cura V5.0 Good (0.20) Profile from Filament Friday

This is my latest Cura Best Profile (0.12 layer height) for Cura version 5.0.
Instructions:
1) Download the .3mf and open it as a project in Cura V5.0. 
2) Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
3) Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
4) The model is a test print to verify the profile is working on your machine.
5) Slice the print and run it on your Creality Machine. 

Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

Cura V5.0 Best (0.12) Profile from Filament Friday

Cura V5.0 Best Profile from Filament Friday


DESCRIPTION
This is my ExtraFast Profile (0.28 layer height) for Cura version 5.0.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.



Cura V5.0 ExtraFast (0.28) Profile from Filament Friday

This is my Beta - HyperFast Profile (0.32 layer height) for Cura version 5.0.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.



Cura V5.0 HyperFast (0.32) Profile from Filament Friday

DESCRIPTION
This is my ExtraFast Profile (0.20 layer height) for Cura version 5.1.
Instructions:
Here is a video showing how to load them:
https://youtu.be/EJD1hCJpM_w
Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.


Cura V5.1 ExtraFast (0.20) Profile from Filament Friday

DESCRIPTION
This is my ExtraFast Profile (0.20 layer height) for Cura version 5.1.
Instructions:
Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.


DESCRIPTION
This is my ExtraFast Profile (0.28 layer height) for Cura version 5.1.
Instructions:
Here is a video showing how to load them:
https://youtu.be/EJD1hCJpM_w
Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.


Cura V5.1 ExtraFast (0.28) Profile from Filament Friday

DESCRIPTION
This is my ExtraFast Profile (0.28 layer height) for Cura version 5.1.
Instructions:
Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.


Cura V5.0 Cura V5.1 ExtraFast (0.28) Profile from Filament Friday

This is my TPU Profile (0.20 layer height) for Cura version 5.0.
Instructions:

Download the .3mf and open it as a project in Cura V5.0.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new V5.0 Best profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

Note: Make sure to adjust retraction distance for your TPU.



Cura V5.0 TPU Profile from Filament Friday

DESCRIPTION
This is my ExtraFast Profile (0.12 layer height) for Cura version 5.1.
Instructions:
Here is a video showing how to load them:
https://youtu.be/EJD1hCJpM_w
Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.


Cura V5.1 ExtraFast (0.12) Profile from Filament Friday

DESCRIPTION
This is my ExtraFast Profile (0.12 layer height) for Cura version 5.1.
Instructions:
Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is a test print to verify the profile is working on your machine.
Slice the print and run it on your Creality Machine.
Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.


This the prop block I showed on Filament Friday which uses my new 0.6 nozzle size ExtraFast Profile (0.44 layer height) for Cura version 5.1.

Instructions:
Here is a video showing how to load my profiles:
https://youtu.be/EJD1hCJpM_w

Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is the same one shown in the Filament Friday video.
Slice the print and run it on your printer.

Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

Filament Friday 0.6 Nozzle Extra Fast Profile  with Prop Block File

This is my 0.6 nozzle ExtraFast Profile (0.44 layer height) for Cura version 5.1.

Instructions:
Here is a video showing how to load my profiles:
https://youtu.be/EJD1hCJpM_w

Download the .3mf and open it as a project in Cura V5.1.
Select "Create New" for the Printer Settings so it doesn't override your existing Machine Profile (you can delete this later).
Select "Create New" for the Profile Setting to get the new profile.
The model is the same one shown in the Filament Friday video.
Slice the print and run it on your printer.

Note: If you don't have a Creality machine, use the included machine profile and adjust it to match your printer dimensions and rename it. This will give you access to all my future profiles.

3D printing accessories for the Gridfinity modular workshop system - store tools, nozzles, and more!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Caddy: https://a360.co/3KzVx2a
- Bottle Holder: https://a360.co/3LVjAsC
- Magigoo Holder: https://a360.co/3KzVEe6
- Nozzle Holder: https://a360.co/3KxGS7y
- Volcano Nozzle Holder: https://a360.co/3JLhKJz
- Revo Nozzlebreak Holder: https://a360.co/3xmVPpk
- Glue Sticc Holder: https://a360.co/3vapCiq

This assortment of 3D printer organizers is perfect for printing what you love to print - accessories for your printer!

**3D Printer Caddy**: Puts emergency supplies within reach! Holds scraper, nippers, tweezers, acupuncture needles, brass brush, adjustable wrench, and nozzle wrench

**Bottle Holder**: Designed to hold Nano Polymer high-temperature bed treatment, but also fits many small spray bottles. Bottles should not shake loose.

**Dual Bulk Nozzle Holder**: Holds eight copies of two different nozzle sizes. Can stack when loaded with E3D or Creality-style nozzles.

**Quad Revo Holder**: Holds four E3D RapidChange Revo nozzle-heatbreak nozzlebreaks. Can stack.

**Triple Volcano Holder**: Holds three extended E3D-style holders, like those included with the Anycubic Vyper and Kobra. Can stack.

**Glue Stick Holder**: Holds multiple sizes of icky sticky horsey bois, particularly Elmer's small and regular, and Kores.

**Magigoo Holder**: Holds four-piece Magigoo bed treatment assortment pack, and should not allow them to jiggle loose.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity 3D Printing Bundle for Nerds

3D Printer Caddy.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3189377.

I designed my own 20mm x 20mm x 20mm Calibration Cube in Tinkercad so I had my own test print for reference.
I call it the CHEP Cube. 
It’s become a popular print for many people and it’s fun to see where it turns up. 

The Images are from a print on my Ender 3.

I added two images printed at 0.12 using my CHEP 0.12 profile.
https://www.chepclub.com/cura-profiles.html

CHEP Cube - Calibration Cube

__This is the new version V3, of Marsgizmo Filament Bunker__

This is a solution to keep your 3D Printing Filaments dry.
It is designed for 3D Printing.

Please ignore the wrong part names (currently not possible to rename them). 
After download, you'll get the correct parts and names.


This new version is compatible with both containers (Narrow and Wide).

__Check the added pictures for more details__


See the quick assembly in [my video](https://youtu.be/Es-HM-d71WA)
Here's also the [previous video] (https://youtu.be/w2T6HxC_8cE)

____________________________

__What do you need to make it?__

For each individual Filament Bunker, you need (more details below):
> 1 x cereal container
> 4 x bearings
> 1 x about 50cm (20”) of PTFE tube
> 1 x PTFE connector (for 4mm OD PTFE tube)
> 50 grams (1/2 cup) of Silica beads
>  1 x Hygrometer
> 3D Printed Parts (1 x Main Body, 1 x Silica Lid, 1 x Cylinder 1 and 1 x Cylinder 2). No supports needed for printing.


____________________________

__Where to buy the additional parts?__
The following are my affiliate links.

There are 2 cereal containers (Narrow and Wide), check the above video to distinguish the differences:
> Narrow Container: with big handgrips can hold Spools of 60mm width and 200mm in diameter (usually 750g Spools) 
Get them from here (not available in all countries): [link] (https://geni.us/pSLAo)


> Wide Container: can hold Spools of 68mm width and 200mm in diamerter (usually 1Kg Spools, e.g. Prusament, etc.).
Get them from here (not available in all countries): [link] ( https://geni.us/nrcXpYG)


The volume of both containers is 4 liters (16.9 Cups, 135.3oz).
DO NOT GET the smaller versions!


Using regular 608 ZZ (or 2RS) skateboard bearings: 
> pack of 10: [link] (https://geni.us/uLMvbQ)
> or pack of 100: [link] (https://geni.us/OiChoH)



PTFE tube and connectors. I recommend 3mm ID / 4mm OD, but you can also use regular 2mm ID / 4mm OD
(ID - Inner Diameter, OD - Outer Diameter)
> 3mm ID / 4mm OD: [link] (https://geni.us/NIfXBG4)
> 2mm ID / 4mm OD: [link] (https://geni.us/4YjDen)
> PTFE M10 Connector: [link](https://geni.us/JQRSNXl)

Silica Beads: 
> the best are Molecular Sieve beads [link] (https://amzn.to/3jljvU9)
More details about [which method is the best](https://www.sorbentsystems.com/desiccants_charts.html)
> silica beads with no markers: [link] (https://geni.us/ktHdsU)
I recommend using silica with no color markers, the ones which are blue or orange are [slightly toxic](https://en.wikipedia.org/wiki/Silica_gel)

Hygrometer (the square version, not round): [link] (https://geni.us/gAhF3)
Dimensions: 46mm x 27mm / 1.81 x 1.06 inch.



____________________________
__Printing details:__

> - no supports needed!
> - can easily be printed from PLA (try to use quality PLA), otherwise go with PETG.
> - 0.2mm layer height for better quality, but also 0.3mm layer height works fine (lower quality)
> - 3 perimeters (for strength)
> - 100% infill (there’s a very tiny difference in overall quantity)
> - you need in Total around 67 grams on PLA, for one complete set.
> - you can print is on small beds like Prusa Mini 18x18cm (you only need to rotate the Main Body 45 degrees)
____________________________

__Check my other videos:__

[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)



____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

marsgizmo Filament Bunker V3

__ This is the Main Body for the marsgizmo Filament Bunker__
It is designed for 3D Printing.

> 👉 [check it here in my video]()

[my Youtube channel] (https://www.marsgizmo.com)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__


____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)


Main Body v5.stl

Marsgizmo Filament Bunker v3 - Cylinder 2.stl

Mount storage right to your printer with the Gridfinity modular workshop storage system - whatever machine you use!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Anycubic Sidecar: https://a360.co/3xonYw4
- Anycubic Top: https://a360.co/3jy22GN
- Lulzbot: https://a360.co/3xobNzx
- Prusa: https://a360.co/3Jzfp47
- Snapmaker: https://a360.co/37Om65m
- E3D Toolchanger: https://a360.co/3rlmn6K

These brackets mount to your 3D printer and allow you to put Gridfinity storage blocks right where you need them! These work especially well for the [Gridfinity 3D-printer accessory kit](https://bit.ly/3jtTfWu).

If you need more adjacent slots, just print multiple baseplates and butt them up against each other. *I STRONGLY recommend magnets or screws so you don't knock stuff into your printer!*

**Anycubic Vyper/Kobra**: Also fits any printer made of extrusion with 6mm slots. Mount to your printer's frame with [M5 hammer nuts for 6mm slots](https://amzn.to/3jzbOZb) and [M5x12mm countersunk screws](https://amzn.to/3xoGLHV). Remember to measure countersunk screws from the TOP OF THE HEAD!

The **sidecar** baseplate mounts to the base frame, parallel with the floor, a lot like the included filament holder. The **top-mount** baseplate mounts on the Z axis crossbeam or base frame. *Make sure the gantry, extruder, and plate don't collide with your Gridfinity!*

**Lulzbot**: Fits the upward-facing edges of the top crossbars. This one is a real pain in the butt to install.

**Prusa**: Slides on over the steel frame, no fasteners required. *THE BASEPLATE AND EXTRUDER MUST BE ON OPPOSITE SIDES OF THE FRAME!*

**Snapmaker**: Mount to the optional enclosure with [M5 hammer nuts for 6mm slots](https://amzn.to/3jzbOZb) and [M5x12mm countersunk screws](https://amzn.to/3xoGLHV). Remember to measure countersunk screws from the TOP OF THE HEAD! I didn't make one for the printer itself, sorry!

**Toolchanger**: Mount to the top of the printer with three button head M3x5 screws. *Don't use longer screws! They won't fit!*

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Printer-Mounted Baseplates

Anycubic Baseplate, Sidecar.stl

I designed my own 20mm x 20The Images are from a print on my Ender 3.
mm x 20mm Calibration Cube in Tinkercad so I had my own test print for reference.
I call it the CHEP Cube.
It’s become a popular print for many people and it’s fun to see where it turns up.

CHEP Cube

CHEPCube.stl

**The FAN ART Model Great Paint Off**

**After a ton of planning and coordination, we are ready to launch our first FAN ART model painting competition! (Yay!)**

**But first, we would like to give a special thanks to you,** as, after all, thanks to your fantastic fellowship and support, and that of the other members of this wonderful community, this printing obsession is possible. So, **THANK YOU!!!**

**Now, let us explain what the FAN ART category is about:**
This category includes anything related to **characters from movies, anime, series, video games, comics, etc.**
For example, it includes Mario Bros, Pokemon, Evangelion, Sonic the Hedgehog, Overwatch, League of Legends, and anything **else you can find on [Printed Obessesion’s page on Thangs 3D!](https://thangs.com/designer/printedobsession)**

So, get your paints & painting station prepped, calibrate your 3D printer, warm your painting hand, and (most importantly) **choose your favorite Printed Obsession FAN ART models.**

Select your desired PO STL file **and get the printing started!**

**The painting contest opens on June 1st and closes on July 1st**
This means you’ll have 30 days to submit your entries.

These amazing **pro painters, 3D printers, and 3D model designers will judge your work:**
[Don Suratos](https://www.youtube.com/c/DonSuratos)
[Fotis Mint](https://twitter.com/fotismint)
[Jonathan Levi](https://www.youtube.com/@thenextlayer)
—
**How to participate:**
To participate, you’ll only have to do 4 things: 
1. Paint and then Post your painted models to Instagram.
2. Follow our collaborators on Instagram. 
(see the “Collaborators Follow Requirements” section below).
3. Follow the Instagram Post Requirements (detailed below).
Send your pics & info to **comp@mousejeweller.co.uk**, following these specifications:
- Email Subject line: Great FAN ART Paint Off - [your Insta handle]
(example: Great FAN ART Paint Off - PrintedObsession)
- Email Content: 
- Your Full name
- Your Country
- Link to your Instagram Post (Public)
- Attachment: At least 3 submission pics

**Submissions acceptance begins on June 1st, and the last day to submit your entry will be June 29th.**

—
**The Great Paint-Off Prize Pool
1st Prize**
- An [Elegoo Mars 3 PRO 3D](https://www.elegoo.com/collections/3d-printing/products/elegoo-mars-3-pro-4k-mono-lcd-3d-printer) printer
- [The Army Painter Warpaint MEGA Paint set](https://www.thearmypainter.com/shop/us/wp8021p)
- Both sets of [Chronicle RPG Sable & Wolf Paintbrushes](https://chroniclecards.shop/collections/paints-and-paintbrushes) + [Brush-cleaning Soap](https://chroniclecards.shop/products/vegan-brush-soap-100g?_pos=1&_psq=soap&_ss=e&_v=1.0)
- A $20 Discount Coupon on Chronicle RPG’s store
- 3 Bottles of [Elegoo 3D Printing Resin](https://www.elegoo.com/collections/resin)

**2nd Prize**
- A [Chronicle RPG Sable Paintbrush set](https://chroniclecards.shop/collections/paints-and-paintbrushes) + [Brush-cleaning Soap ](https://chroniclecards.shop/products/vegan-brush-soap-100g?_pos=1&_psq=soap&_ss=e&_v=1.0)
- $100-worth of [3DJake 3D printing supplies](https://www.3djake.com/) of your choice
- A $20 Discount Coupon on Chronicle RPG’s store

**3rd Prize**
- A [Chronicle RPG Wolf Paintbrush set](https://chroniclecards.shop/collections/paints-and-paintbrushes) + [Brush-cleaning Soap](https://chroniclecards.shop/products/vegan-brush-soap-100g?_pos=1&_psq=soap&_ss=e&_v=1.0)
- $60-worth of [3DJake 3D printing supplies](https://www.3djake.com/) of your choice
- A $20 Discount Coupon on Chronicle RPG’s store

**Community Awards x3 (chosen by the Printed Obsession team)**
- $30-worth of [3DJake 3D printing supplies](https://www.3djake.com/) of your choice

**Participation Gifts (for all who submit painted models)**
 - 1 FREE month sub to Printed Obsession’s MyMiniFactory Tribes
- A $5 Discount Coupon on Chronicle RPG’s store

—
**General Rules:**
- You can paint and submit any of [Printed Obsession’s models found on Thangs 3D.](https://thangs.com/designer/printedobsession)
- Minis must be printed at a maximum of 120% of its original size (20% increase) or less.
- All models - obviously - must be painted by yourself; otherwise, you will be disqualified.
- You can submit multiple entries to the contest—as many as you can paint.
- You are allowed to make busts out of models, but they can’t be modified or kitbashed either digitally or physically in any other way.
- Bases/dioramas can be customized but won't be decisive to win.
You can't include content from other Patreons or creators (only by yourself or PO).
- Photos can't be edited by any kind of software or be post-processed.
- You can do minor tweaks like saturation, levels, etc., to convert the .raw format file.
- You can't overpaint or edit certain parts of the picture to fix mistakes.

—
**Submission Requirements**
Submitted Pictures Specification Requirements
- The final photos must be attached to the email in .jpg (jpeg), max size: 2 MB.
- Photo quality counts, so make sure to capture your minis’ “good side”.
- Send at least 3 photos from different angles.
- We recommend using gray background to facilitate the evaluation.
- Low-quality photos will make evaluation very difficult, so deficient-quality images or those that don't meet the requirements will not be evaluated.


Here’s a Miniature Photography Tutorial to help: [Mini Photo Tutorial](https://www.warhammer-community.com/2018/03/06/the-model-photo-how-to-photograph-models-for-display/)

**Collaborator Follow Requirements**
Participants must follow the following Instagram accounts:
[Thangs3D](https://www.instagram.com/thangs3d/)
[Elegoo](https://www.instagram.com/elegoo/)
[TheArmyPainter](https://www.instagram.com/thearmypainter/)
[ChronicleRPGs](https://www.instagram.com/chroniclerpgs/)
[3DJake_Official](https://www.instagram.com/3djake_official/)
[PrintedObsession](https://www.instagram.com/printedobsession/)

_*Failure to do so will mean disqualification (Please, don’t be cheeky; we’ll double-check)._

**Instagram Post Requirements**
Copy and Paste the following mentions and hashtags in your submission posts’ caption:

@Thangs3D @Elegoo @TheArmyPainter @ChronicleRPGs @3DJake_Official @PrintedObsession

#FanArtGreatPaintOff #thangs #Thangs3D #Elegoo #ElegooMars #ElegooMars3DPrinter #TheArmyPainter #TheArmyPainterWarPaints #PrintedObsession #ThePaintingObsession #3DJake #3DJake_Official

—
**Contest Coverage**
Follow the contest’s progress and submissions here: [#FanArtGreatPaintOff](https://www.instagram.com/explore/tags/fanartgreatpaintoff/)

—
**Check Out Our Collaborators’ Sites:**
[Thangs 3D
](https://thangs.com/)
[Elegoo](https://www.elegoo.com/)
[The Army Painter](https://www.thearmypainter.com/shop/us/)
[Chronicle RPG](https://chroniclecards.shop/)
[3DJake](https://www.3djake.com/)

—
**The Other Painting Competition Category - TTRPG Miniatures**
In case you haven’t heard, we are also running a parallel TTRPG miniature painting competition, which you can also participate in, [here](https://www.myminifactory.com/object/3d-print-wolf-puppets-free-model-for-painting-competition-presupported-illustrated-32mm-scale-300058)

—
**Terms & Conditions**
- The prize details, delivery, and specs are as follows:
- If any of our collaborators do not ship to your country, we will claim it for you and send it via mail, and we will cover shipping costs.
- Printed Obsession’s past-release complete model sets will be chosen from our MyMiniFactory Official Store and delivered as pre-supported STL format files.
- To claim your prizes, some personal info will be requested. This includes: full name, address & personal email address.
- To claim some prizes, you will be asked to create an account on their respective site/platform. 
- Cash payments are not possible; thus, physical prizes will be delivered to your private address, and digital prizes will be sent via DropBox.
- The painting contest is open internationally.
- Winners will be notified via Instagram DM and email.
- We will announce the winners in a public winner-announcement post using their Instagram account handles.
- Winners might be asked to send pictures of themselves with the physical prizes after they are delivered, as requested by some of our collaborators. These pics will not be publicly posted by Printed Obsession.
- By participating in this painting competition, you agree to these terms and conditions.
- Per Instagram rules, this promotion is not sponsored, administered, or associated with Instagram, Inc. By entering; entrants confirm that they are 13+ years of age, release Instagram of responsibility, and agree to Instagram's terms of use.

**Best luck to all!**

Cheers, 
**Printed Obsession & Team**


Bowser - Super Mario Bros - Fan Art

The FAN ART Model Great Paint Off
After a ton of planning and coordination, we are ready to launch our first FAN ART model painting competition! (Yay!)

But first, we would like to give a special thanks to you, as, after all, thanks to your fantastic fellowship and support, and that of the other members of this wonderful community, this printing obsession is possible. So, THANK YOU!!!

Now, let us explain what the FAN ART category is about:
This category includes anything related to characters from movies, anime, series, video games, comics, etc. 
For example, it includes Mario Bros, Pokemon, Evangelion, Sonic the Hedgehog, Overwatch, League of Legends, and anything else you can find on Printed Obessesion’s page on Thangs 3D!

So, get your paints & painting station prepped, calibrate your 3D printer, warm your painting hand, and (most importantly) choose your favorite Printed Obsession FAN ART models.

Select your desired PO STL file and get the printing started!

The painting contest opens on June 1st and closes on July 1st
This means you’ll have 30 days to submit your entries.

These amazing pro painters, 3D printers, and 3D model designers will judge your work:
Don Suratos
Fotis Mint
Jonathan Levi
—


CNC collet storage blocks for the Gridfinity modular workshop storage system - they're both ER11 for now.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Stupid Version: https://a360.co/3JznS7x
- Non-Stupid Version: https://a360.co/3M0PDar

These bad boys hold CNC collets - I only have an ER11 Snapmaker, so that's what ya get.

**The stupid version** holds collets in their little yellow boxes.

**The non-stupid version** holds the collets without the boxes.

There's no reason to use the stupid version. Just remember to keep the collets nice and oiled to prevent rust.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

3D Printers

Categories

Popular

Personalize

Trending