This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap installed but it expands to over 950mm in total length with the collapsing blade installed! 

Its designed to be printed with a ,4mm nozzle, with a line thickness of .43, so the blade will be two shells thick. The test print can be found [here.](https://thangs.com/3dprintingworld/SwordSaber-Test-Print-23601)

**Links to the filament I used(aff):**
[Galaxy Black](https://amzn.to/3Cu2xKt)
[Lipstick Red](https://amzn.to/3jH1Fti)

**Video**
[Intro](https://youtu.be/xN0H9npkkP4)
[Troubleshooting](https://youtu.be/YQV4PYJPhx0)


**Collapsing Lightsabers**
[ROTJ Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-LightsaberPNP-23596)
[ROTJ Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Lightsaber-Dual-Extrusion--34803)
[Vader’s Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-dual-extrusion-28319)
[Leia’s Dual and Single](https://thangs.com/3dprintingworld/Leias-Dual-Extrusion-Collapsing-Lightsaber--25509)
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership](https://than.gs/u/35786?plans=true) 
To get permission to sell physical copies of my models, consider joining my [Patreon](https://www.patreon.com/3dprintingworld)


Collapsing Sith Lightsaber

COLLAPSING-LIGHTSABER-SITH.stl

This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap installed but it expands to over 950mm in total length with the collapsing blade installed! 

Its designed to be printed with a ,4mm nozzle, with a line thickness of .43, so the blade will be two shells thick.  The test print can be found [here.](https://thangs.com/3dprintingworld/SwordSaber-Test-Print-23601)

Detailed printing instructions can be found on my [website]( https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords
)


**Links to the filament I used(aff):**
[Transparent Green](https://amzn.to/2JJYBMH)
[Silver](https://amzn.to/2Vya1Jv)


**Video**
[Intro](https://youtu.be/xN0H9npkkP4)
[Troubleshooting](https://youtu.be/YQV4PYJPhx0)

**Collapsing Lightsabers**
[ROTJ Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Lightsaber-Dual-Extrusion--34803)
[Vader’s Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-23598)
[Vader’s Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-dual-extrusion-28319)
[Leia’s Dual and Single](https://thangs.com/3dprintingworld/Leias-Dual-Extrusion-Collapsing-Lightsaber--25509)
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership](https://than.gs/u/35786?plans=true) 
To get permission to sell physical copies of my models, consider joining my [Patreon](https://www.patreon.com/3dprintingworld)


Collapsing Lightsaber

LIGHTSABER-HILT.stl

BLADE-3-VASE.stl

BLADE-2-VASE.stl

BLADE-1-VASE.stl

BLADE-5-VASE.stl

BLADE-4-VASE.stl

2 in 1 LEGO model

LEGO with skeleton model

Here is a new combined model of Lego man & Lego Skeleton 

Lego man (https://grabcad.com/library/classic-lego-man-1)
Lego Skeleton  (https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1)

LEGO

Lego.x_t

A String Biplane model with spinning propellor and wheels

Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne.

All parts are printed without supports

I found a brim allowed me to print the front file at a faster speed.

To assemble place the 'propellor back' into  the 'engine', push the propellor through and screw in place, then screw the engine and propellor into the front of the Biplane.

My Biplane is printed in Geeetech Bronze Rainbow filament which you can find here: https://amzn.to/3KKlZrU

I also have a version with hanging rings attached which you can find here: https://than.gs/m/923028

String Biplane:  No Supports

DISPLAY ONLY.stl

A complete file of Darth Vader Lego
Design in Solidworks software
STL & STEP files

Darth Vader 3D Print Lego 

Darth vader Lego.x_t

#3Dprint #PDO
This is full size Toy Nunchucks.
Print in place.
No assembly.
No supports needed.
Recommend best outcome print with Rainbow Filament or Colour swap as per need.
Ball joint at chain end.
Ready to print stl file.
Print in standing position as shown.
More version with different handle design will be added later


TOY NUNCHUCKS version 1.stl

NUNCHUCKS version 1.stl

A flipping desk toy with a really satisfying clunky sound.

See it in action here: https://vimeo.com/851531427?share=copy

There's a big and small versionand there is also a plain flipper without the hands and feet.

Print the flipper with supports touching buildplate at 100% infill to give the ball in the centre a good weight to help it flip.

Flipper Desk Toy

Flipper hands and feet.stl

The "Print in Place Fidget Grenade" hosted at Thangs.com is an innovative 3D printed gadget under our 'Devices' category. A culmination of cutting-edge 3D printing technology and creativity, this device impresses with its intricate design and interesting concept. Perfect for those who love fidgeting or just appreciate a fun novelty item, this fidget toy brings a new level of excitement into the mix.

What sets this 3D model apart is its "print in place" design, ensuring all parts remain interconnected after printing. Every detail of the original grenade design is captured with precision, adding to its aesthetics while maintaining user-friendliness. It's a perfect fusion of realistic design and immersive play.

The clear, high-resolution images showcase this model from various angles, appreciating the stunning level of detail and ingenuity of design. Immerse yourself in the fascinating craft of 3D printing, or simply explore fun new ways to soothe your fidgeting impulses with the "Print in Place Fidget Grenade".

Experience a new era of fidget toys only on Thangs.com. Where fidgeting is more than just a habit—it's a whole new world of fun and innovation!

Print In Place FIDGET GRENADE

Print in Place Fidget Grenade.stl

Boba Fett Lego

Boba Fett Lego.STEP

Ironman LEGO

Ironman Lego.STEP

Just a classic minifigure with a raised eyes and mouth...yep!

LEGO MINIFIGURE!

LEGO Spiderman 

Lego Spiderman.STEP

Mandalorian LEGO

Mandalorian LEGO.STEP

This fidget toy is based on a common toggle switch mechanism. Assembly requires no hardware.

[https://youtu.be/zfiyeE8l3-0](https://youtu.be/zfiyeE8l3-0)

[https://youtu.be/0txw6uiIqhg](https://youtu.be/0txw6uiIqhg)

[https://youtu.be/lhFLaZz_SOo](https://youtu.be/lhFLaZz_SOo)


**Printing**

All parts can be printed without supports.

Print spring with 100% infill. Ideally, the filament path should run the length of the spring. This can be achieved by forcing the infill to be horizontal instead of diagonal or by setting the perimeter count to a high value.

Print the peg in the back case with a high infill to prevent snapping.


**Customization**

Springs
- Spring - Default option
- Half Click Spring - Provides a half-click state

Cases
- Case Front/Back - Default option
- Bolt Case - Supports a metal bolt
- Strong Case Front/Back - Uses the Strong Central Post

Buttons
- Default Button
- Emotive button - 2-part button with an expressive face


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)tion examples

Super Toggly Fidget Button

Assembled view of a Super Toggly Fidget Button.

Assembled Toggle Button - Standard Case.stl

Half_Click_Spring.stl

Central_Post_Strong.stl

Case_Back_Strong.stl

Case_Front_Strong.stl

Button - Worried.stl

Button - Calm.stl

Button - Confused.stl

Button - Suspicious.stl

Button - Grin.stl

Button - Happy.stl

Button - Love.stl

Button - Main.stl

Button - Neutral.stl

Button - Sad.stl

Button - Silly.stl

Button - Tired.stl

Button - Wink.stl

Button - Angry.stl

Button - Blank.stl

Button - Huge_Grin.stl

Button - Shocked.stl

Rattlesnake

All the details are in the video , the chassis need to be adjusted to fit a body .

You can see how i build it here https://youtu.be/RnrfVLuBDHM

1:32 scale rc car kit

back frame 2 motor atachments use screws .stl

Batman Lego

Batman Lego.STEP

Detail model of Batman Lego
No Texture in this, Print in 3D

Check out other models here,
https://thangs.com/designer/Roboninja

Batman Lego 3D

This LEGO with Texture Bump so you can print this LEGO with their original Texture

Enjoy your Print

New Ironman LEGO

Ironman New.STEP

Cute Teddy for 3D Print
Easy to Print
Print Now...

Teddy bear.stl

This challenging print is a take on the classic pin screen toy.

Place an item below the pins and they'll move to mimic the contours of the object!

[https://youtu.be/OHlQux6WmxQ](https://youtu.be/OHlQux6WmxQ)


**Printing**

Test printing only a few pins at a time to make sure your they'll stick well to your print bed. If they do, slowly increase the quantity per print.

This project includes a 10 pin option that holds the thin end of each pin down to limit curling.


**Required Parts**

- 271 pins
- 2 Grids
- 6 Spacers (use 6mm for a compact design or 12mm for more stability)
- 12 M3 nuts.
- 6 M3 bolts that are long enough to pass through the nuts, grids, and the spacers you chose.
 

**Assembly**

Align both grid pieces so their holes match up. There's a tiny circular indent on one side to help orient these pieces.

Insert an m3 nut into each of the 6 spacers.
Place 6 spacers between both grid pieces and secure with the 6 m3 bolts. It does not matter if the bolt head faces up or down, so choose the direction that looks good to you.

If no optional parts are being added, secure the bolt with the remaining 6 m3 nuts.



**How I Designed This**
This was a lesson in getting around the limits of 3D printing! Printing tall and thin items (like a pin) vertically is normally torture on a printer.

This required a new pin design - one which could be printed sideways, and still have no overhangs. By placing the long neck of the pin on one side, and changing the head to a hexagon, each pin is now much easier to print!

Pin Screen Toy - Hexed Edition

Assembled

This construction toy is inspired by the discontinued Pipeworks sets from the 1980s.

Rather that replicate the original set exactly, this has been scaled down and optimized for 3D printing. This project also includes completely new parts!

**Videos**

- [Introduction](https://youtu.be/pBeEYad1epU)
- [Update!](https://youtu.be/cURVq72HxiI)

**Printing**

This design requires no supports.

Some taller pieces may need a generous brim, especially if using a printer with a moving bed.

Look out for elephants foot (squishing on the bottom layers). This may cause tight fitting parts to fall too far out of spec. If needed, use a deburring tool to clean up the bottom edge of the prints.

Infill can be relatively low - 10-15%

Print the optional rivets in TPU or similar flexible filament.

Print the optional lock rings in PETG or strong formulations of PLA (PLA+).

Avoid using brittle PLA filaments for this project.

This design includes parts that are intended to slide and lock together with only 0.125mm of clearance. If you are unsure if your printer can reproduce this accurately, print one part of any of the joint pieces and the smallest pipe as a test. The parts should slide together without extreme force.



**Assembly**

This project relies heavily on glue to assemble the joint pieces. For this project, I recommend using [3D Gloop!](https://www.3dgloop.com/), which will quickly fuse the parts together.

All joints parts include alignment geometry where they connect with each other. Test positioning these parts before gluing them.



**Misc**

For easier organization, some identical parts have been listed multiple times. For example, the “X Joint” uses a part identical to the “T Joint”.



**Can I sell copies of this?**

Sorry, but no. This design is based on an existing (although discontinued) toy, so it is not available under a commercial license. Some remixes of this project may be listed under a different license.

**Updates**
- Curved Pipes
- Round Endcap
- 5-Way Connector
- 6-Way Connector
- Multi-hinge
- Slats
- Detents
- Tool

Printy Pipes - Construction Toy

Set.step

Clip Connector 2 Alternate.stl

Hinge Connector 2 Alternate.stl

Tool.stl

2-Way Hinge Connector 1.stl

2-Way Hinge Connector 2.stl

3-Way Hinge Connector 1.stl

3-Way Hinge Connector 2.stl

4-Way Hinge Connector 1.stl

4-Way Hinge Connector 2.stl

5-Way Connector 1.stl

5-Way Connector 2.stl

5-Way Connector 3.stl

5-Way Connector 4.stl

5-Way Connector 5.stl

6-Way Connector 1.stl

6-Way Connector 2.stl

6-Way Connector 3.stl

6-Way Connector 4.stl

6-Way Connector 5.stl

6-Way Connector 6.stl

Curved Pipe Large 1.stl

Curved Pipe Large 2.stl

Curved Pipe Medium 1.stl

Curved Pipe Medium 2.stl

Curved Pipe Small 1.stl

Curved Pipe Small 2.stl

Lock Detent 1.stl

Lock Detent 2.stl

Lock Detent Stiff 1.stl

Lock Detent Stiff 2.stl

Round Cap Connector.stl

Slat Large Double Sided End.stl

Slat Large Double Sided Middle.stl

Slat Large End.stl

Slat Large Middle.stl

Slat Medium Double Sided End.stl

Slat Medium Double Sided Middle.stl

Slat Medium End.stl

Slat Medium Middle.stl

Slat Small Double Sided End.stl

Slat Small Double Sided Middle.stl

Slat Small End.stl

Slat Small Middle.stl

Curved Clamp Pipe Small 2.stl

Curved Clamp Pipe Small 1.stl

Curved Clamp Pipe Large 2.stl

Curved Clamp Pipe Large 1.stl

Curved Clamp Pipe Medium 2.stl

Curved Clamp Pipe Medium 1.stl

Slat Textured Large End.stl

Slat Textured Large Middle.stl

Slat Textured Medium End.stl

Slat Textured Medium Middle.stl

Slat Textured Small End.stl

Slat Textured Small Middle.stl

Slat Window Large End.stl

Slat Window Large Middle.stl

Slat Window Small End.stl

Slat Window Small Middle.stl

Slat Window Medium Middle.stl

Slat Window Medium End.stl

Pipe Hinge.stl

Twist Connector 2.stl

Twist Connector 1.stl

Tilt Connector 2.stl

Tilt Connector 1.stl

Flag.stl

Flag 3D Printy Logo.stl

Wheel.stl

Hubcap.stl

Axle.stl

Axle Clip.stl

Wall Mount.stl

Wheel Hollow.stl

Are you a fan of Lego and love to build amazing creations with bricks? Do you want to keep your Lego pieces organized and easy to find? Then you need the Lego Sorter Box, a 3D printable model that lets you store and sort your Lego pieces in a fun and convenient way. This box is a remix of the Tool Box by Yanev, but with the Lego logo on the top and a base with 9 compartments to separate your Lego pieces by color, shape, or type. It also has a latch and handles for easy opening and carrying.

The Lego Sorter Box is compatible with all the Tool Box Base with Divider models I designed, such as the ones with 2, 3, or 6 compartments and the next ones I will design. You can swap the base to create your own customized Lego sorter box with different sizes and layouts. You can also stack multiple boxes together to create a larger Lego storage system.

The Lego Sorter Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. You can also print it in different colors and combinations to match your Lego bricks. The logo is designed to print with different colors using layer change filament function.

Download the Lego Sorter Box today and enjoy this practical and playful Lego sorter box!

This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without original designer explicit written consent.

To sell them legally, message the original designer.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Lego Sorter Box

Display ONLY - Lego Sorter Box Frikarte3D.stl

**Rey’s Collapsing Lightsaber**
_Replaceable Blade Version_

This version has a screw on cap so the blades can be printed separately then inserted or replaced. The blades can be printed all at once concentrically or individually in vase mode.

Supports are not required, there is a built in support for the buttons that will need to be removed after printing. Find [detailed instructions]( https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords
) on how to print collapsing swords on my website.  

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer
____
Having troubles printing or want to show off your prints?  Join our Facebook [Group.](https://www.facebook.com/groups/1390970855008168) 

Rey's Replaceable Blade Lightsaber

REY HILT.stl

Toys

Most Popular of All Time

Categories

Popular

Personalize

Trending