String Biplane: No Supports

3dprintbunny3dprintbunny

Become a member

Makes

String Biplane: No Supports - 100% awesome job.

I just sent it, trusting it would work on my Anycubic Kobra 2. .3 layer height. - 3d model

String Biplane: No Supports - Absolutely amazing design! Thank you so much!
Printed at 0.2. - 3d model

String Biplane: No Supports - epic stl , just like all your others :) - 3d model

String Biplane: No Supports - Printed in @SliceWorx3D TriColor coextrusion blue green orange - 3d model

String Biplane: No Supports - I tried to make a model in 70%... On prusa slider, 0.28mm, Ender v3... I liked the results.. 😉 - 3d model

String Biplane: No Supports

2K downloads · 1 year ago · A String Biplane model with spinning propellor and wheels Print the Biplane file at 0.3mm layer hei

A String Biplane model with spinning propellor and wheels

Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne.

All parts are printed without supports

I found a brim allowed me to print the front file at a faster speed.

To assemble place the 'propellor back' into the 'engine', push the propellor through and screw in place, then screw the engine and propellor into the front of the Biplane.

My Biplane is printed in Geeetech Bronze Rainbow filament which you can find here: https://amzn.to/3KKlZrU

I also have a version with hanging rings attached which you can find here: https://than.gs/m/923028

Categories:

Tags:

667 Likes2K DownloadsAugust 18, 2023

This model is restricted by licensing terms.

View license.