Profile Image
3dprintbunny
3dprintbunny

3dprintbunny

A 3d print designer, artist and enthusiast. I love experimenting with 3d print techniques.

Want to support me? Save 25% on Supporter and Commercial membership using the code 3DPB25

Follow

Select a membership plan

Monthly billing
Annual billing
17% off
Supporter Plus
Supporter Plus
$8.33
/ month
when billed annually

This supporter plus plan gives you:

  • A MASSIVE thank you for your support
  • Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
  • One new exclusive design monthly
  • Opportunity to suggest and request new designs
  • Advice and support
Immediate access. Cancel anytime.
17% off
Commercial Print & Sell
Commercial Print & Sell
$9.96
/ month
when billed annually

This membership plan gives you the right to print and sell any of the 3DPrintBunny designs available for download on the Thangs website, for the duration of your membership.

You also get:

  • Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
  • One new exclusive design monthly
  • this membership does not permit the use of any 3DPrintBunny design to promote products other than the design itself*
Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.
AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
Natalie C

String Biplane: No Supports

by
3dprintbunny
Follow
Follow
Remix Model
Social
3dprintbunny
3dprintbunny
|
Image 1 of 13
String Biplane: No Supports 3d model
3dprintbunny
3dprintbunny
|
Image 1 of 13
String Biplane: No Supports 3d model
2D
3D
Makes
String Biplane: No Supports 3d model
String Biplane: No Supports 3d model
String Biplane: No Supports 3d model
String Biplane: No Supports 3d model
String Biplane: No Supports - 100% awesome job. I just sent it, trusting it would work on my Anycubic Kobra 2. .3 layer height. - 3d model
String Biplane: No Supports - Absolutely amazing design! Thank you so much! Printed at 0.2. - 3d model
String Biplane: No Supports - epic stl , just like all your others :) - 3d model
String Biplane: No Supports 3d model
String Biplane: No Supports 3d model
String Biplane: No Supports - Printed in @SliceWorx3D TriColor coextrusion blue green orange - 3d model
String Biplane: No Supports - I tried to make a model in 70%... On prusa slider, 0.28mm, Ender v3... I liked the results.. 😉 - 3d model
String Biplane: No Supports 3d model
String Biplane: No Supports - I did it just for fun. Great design, worked well without supports. PLA, 0,3mm layer on Prusa Mini+ Many thanks to #3dprintbunny - 3d model
This model is restricted by licensing terms. 
View license.

A String Biplane model with spinning propellor and wheels

Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne.

All parts are printed without supports

I found a brim allowed me to print the front file at a faster speed.

To assemble place the 'propellor back' into the 'engine', push the propellor through and screw in place, then screw the engine and propellor into the front of the Biplane.

My Biplane is printed in Geeetech Bronze Rainbow filament which you can find here: https://amzn.to/3KKlZrU

I also have a version with hanging rings attached which you can find here: https://than.gs/m/923028

Categories:

Home
Interior Design
,
Home
Home Improvement

Tags:

663 Likes2K DownloadsAugust 18, 2023
663 Likes2K DownloadsAugust 18, 2023
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy