3D Printable Heart Vase

Looking for a unique gift for a special moment? Or do you wish to express your gratitude to someone? Print out your own heart-shaped vase as a gift. Fully scalable and a perfect gift for your friends & family. 
Components 

The design consists of two components: the body and the vase insert.

The stand can easily be printed in a horizontal position (lying down), without support material. In a standing position, the body has a 40 mm hole at the top in which the vase fits. 

There are two options for vase inserts: a shelled version and a solid version.  

    Shelled is designed to be printed with 3 perimeters. It takes longer to print but it is easier to get it watertight. 
     
    Solid is designed to be printed in vase mode. With only one perimeter and no top layers. This makes it fast to print, but difficult to make watertight (fun little challenge haha). It is also necessary to print with a large nozzle (0.6 - 0.8 mm) + thick layers. Of course, you can also replace the vase with a glass one.
 
Size (100% scale)
  1. Heart Body
 19.8 x 18.3 x 6 cm (horizontal)
 Material: 230 grams
 Print time: 18 h +-
 
2.A Vase insert - Shelled
4.1 x 3.8 x 19.5 cm (vertical)
Material: 63 grams
Print time: 7h +-

2.B Vase insert - Solid (Vase Mode) 
Same size. 
Material: 25 - 50 grams
Print time: 1 - 3 hours

You can scale the heart vase as you like. Make sure you give both components the same scale percentage in your slicer.

Print settings

Heart Body
0.4 - 0.8 mm nozzle 
3 perimeters
10 - 20% infill
Print speed 40 - 60 mm/s

Vase insert - Shelled
0.4 - 0.8 mm nozzle 
3 perimeters
Print speed 30 - 45 mm/s
PETG / ASA
 

Please let me know if you have any questions. I am happy to help. 

It's also a great gift for mothers day, valentines day, weddings, christmas etc.

Non commercial only.

Heart Vase

Heart - Vase Stand (Slimprint).stl

A modern, asymmetric pen organizer 

Store your pens and pencils with this simple and practical organizer.

The model is easy to print, feels solid and is designed to last. 

Size: 11 x 4.3 x 7.5 cm (LxWxH)
Print time: 5 - 6 hours
Organize your desk

Tidy up your desk with your own printed pen holder. This handy storage tray is easy to print without any support material. The bottom is also provided with some grooves so that the pens are more stable and upright in the holder.
Non-commercial use only.

Print settings

0.4 mm nozzle+
0.2 - 0.3 mm layer height
3 perimeters
10% infill
Print speed: 35 - 40 mm/s

For the best print result, I recommend you to adjust your retraction length and speed before you start the print and by setting your z-seam to aligned (in PrusaSlicer).

 Assymetric Pencil Organizer, Modern Desk Decor 

Asymmetric Pencil Organizer by Slimprint.3mf

**A cozy 3D printable home for your pencils, which is super easy to print.**

This canal house inspired pencil holder is a fun way to keep your desk organized and tidy.

Designed to be printed in a standing position, without the need of supports.

Size: 5.4 x 4.3 x 12 cm
Weight: 40 - 70 grams
Print time: 2 - 4 hours

Non-commercial use only, if you have any questions feel free to contact me.

Happy printing! :)

3D printing settings

Nozzle: 0.4 mm (preferably larger)
Layer height: 0.25 mm
Layer width: minimum 0.4 mm
Walls: 2 - 3 (When using thick walls, I would recommend turning off the setting 'fill gaps')
Infill: 5 - 10%
Speed: 35 - 40 mm/s
Z seam alignment: rear


Home for Pencils, Canal House Pencil Holder

**What could be more fun than 3D printing your own Christmas decorations?**

This Christmas Tree ornament is an easy-to-print and elegant model to help you decorate your home. The ornament is designed to be 3D printed without infill, just 2 perimeters.

Size: 5 x 5 x 11 cm
Weight: 25 grams
Print time: 1h 23m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.
Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.45 mm layer thickness / width
2 walls
35 – 40mm/s print speed
No infill
No supports

 Christmas Tree Ornament, Christmas Decor by Slimprint 

**What could be more fun than 3D printing your own Christmas decorations?**

This twisted tree ornament is an easy-to-print and elegant model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright, without infill or supports. Just add a 10mm brim and you're ready to go.

Size: 6.5 x 6.5 x 12 cm
Weight: 18 grams
Print time: 1h 33m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.45 mm layer thickness / width
2 walls
35 – 40mm/s print speed
No infill
No supports
10 mm brim for improved bed adhesion

 Twisted Tree Ornament, Christmas Decor by Slimprint 

**What could be more fun than 3D printing your own Christmas decorations?**

This Donut ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright with just 10% infill.

Size: 10 x 3.3 x 11 cm
Weight: 25 grams
Print time: 2h 57m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**
0.4 mm nozzle
0.25 mm layer height
0.4 mm layer thickness / width
2 walls
35 – 40mm/s print speed
10% cubic infill 
No supports

 Donut Tree Ornament, Christmas Decor by Slimprint 

**What could be more fun than 3D printing your own Christmas decorations?**

This Additive Star ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright with just 10% infill and a 8mm brim.

Size: 10 x 3.1 x 10 cm
Weight: 26 grams
Print time: 2h 7m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.4 mm layer thickness / width
2 walls
35 – 40mm/s print speed
10% cubic infill 
No supports
8 mm brim for improved bed adhesion

DOT1 Donut Tree Ornament by Slimprint.stl

 Additive Star Tree Ornament, Christmas Decor by Slimprint 

AST1 Additive Star Ornament by Slimprint.stl

**What could be more fun than 3D printing your own Christmas decorations?**

This swirling tree ornament is an easy-to-print and elegant object to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright, without infill or supports. Just add a 10mm brim and you're ready to go.

Size: 5.8 x 5.8 x 10.6 cm
Weight: 30 grams
Print time: 1h 49m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing!

Feel free to share it with your family or friends, but this model is not intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.45 mm layer thickness / width
2 walls
35 – 40mm/s print speed
No infill
No supports
10 mm brim for improved bed adhesion

Swirling Tree Ornament, Christmas Decor by Slimprint 

SWT1, Swirling Tree Ornament.stl

**What could be more fun than 3D printing your own Christmas decorations?**

This Iris Tree ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright with just 10% infill.

Size: 9.3 x 3 x 10 cm
Weight: 43 grams
Print time: 3h 50m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.4 mm layer thickness / width
2 walls
35 – 40mm/s print speed
10% cubic infill 
No supports

 Iris Tree Ornament, Christmas Decor by Slimprint 

ITT1, Iris Tree Ornament.stl

**What could be more fun than 3D printing your own Christmas decorations?**

This Icicle-inspired tree ornament is an easy-to-print and elegant model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright, without infill or supports. Just add a 10mm brim and you're ready to go.

Size: 4 x 4 x 12 cm 
Weight: 24 grams
Print time: 1h 26m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.45 mm layer thickness / width
2 walls
35 – 40mm/s print speed
No infill
No supports
10 mm brim for improved bed adhesion

 Icicle Tree Ornament, Christmas Decor by Slimprint 

ICO1, Icicle Tree Ornament.stl

**What could be more fun than 3D printing your own Christmas decorations?**

This mini Beer Bottle ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright without any infill or supports.

Size: 3 x 3 x 12 cm
Weight: 12 grams
Print time: 1h 4m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.45 mm layer thickness / width
2 walls
35 – 40mm/s print speed
No infill
No supports

 Beer Bottle Tree Ornament, Christmas Decor by Slimprint 

BBO1 Beer Bottle Christmas Ornament by Slimprint.stl

**What could be more fun than 3D printing your own Christmas decorations?**

This Subtractive Star ornament is an easy-to-print and unique model to help you decorate your Christmas tree. The ornament is designed to be 3D printed upright with just 10% infill.

Size: 10 x 2.4 x 10 cm
Weight: 32 grams
Print time: 2h 57m

If you have a question about the print settings, please send me an email at slimprintnl@gmail.com. I am happy to help.

Happy printing & Merry Christmas!

Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.

**3D printing settings**

0.4 mm nozzle
0.25 mm layer height
0.4 mm layer thickness / width
2 walls
35 – 40mm/s print speed
10% cubic infill 
No supports

 Subtractive Star Tree Ornament, Christmas Decor by Slimprint 

SST1, Subtractive Star Ornament.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4620775.


A 3D printable Sphere Planter with a striped texture. Designed in Fusion360 to be printed in vase mode.

Print time: 3+ hours (100% scale)
Dimensions: 14 x 10cm (diameter x height)

If you want to use the planter outdoors, I would recommend printing it with PETG or ASA.

If you have questions, feel free to contact me.

Happy printing

NON-COMMERCIAL USE ONLY

Sphere Planter Split, Vase Mode, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4569775.

A vase with diamond pattern I designed in Fusion360, to be printed in vase mode.

Print time approx. 2.5 - 3 hours (depending on scale)

100% scale = 11.4 x 15 cm (diameter x height)

I 3D printed the one in the pictures with wood PLA.

PS If you decide to print this, I would love to see the results. Please find me on instagram ;)

NON-COMMERCIAL USE ONLY


Diamond Vase, Vase Mode print, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4620041.

A 3D printable Sphere Planter with a striped texture. Designed in Fusion360 to be printed in vase mode.

Print time: 3+ hours (100% scale)
Dimensions: 14 x 10cm (diameter x height)

If you want to use the planter outdoors, I would recommend printing it with PETG or ASA.

If you have questions, feel free to contact me.

Happy printing

NON-COMMERCIAL USE ONLY


Sphere Planter Striped, Vase Mode, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4769647.

A Turbine Style Pencil Holder, designed to be printed in Vase Mode.

Print time: 2 - 3.5 hours at 100% scale (depending on settings)
Dimensions: 7 x 8 cm (diameter x height)
Weight: 50 grams

If you have questions, feel free to contact me.

Happy printing

NON-COMMERCIAL USE ONLY

 Turbine Pencil Holder, Vase Mode, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4753496.

A Striped Bulb Vase, designed in Fusion360 to be printed in vase mode.

Size: 105 x 200 mm (100% scale)
Print time: 3 hours hours
Weight: 40 grams

Happy printing

NON-COMMERCIAL USE ONLY


Striped Bulb Vase, Vase Mode, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4583826.

A wonderful spheric tealight holder, with a minimalistic look. Designed in Fusion360. 

Print time: +-2 hours

Dimensions: 6 x 4.2cm (Diameter x Height)

The inner diameter of the tealight holder is 40mm and inner height is 18mm, which makes it compatible with standard sized tealights. 

Seam position: aligned for best results

NON-COMMERCIAL USE ONLY

Spheric Tealight Holder, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4683387.

A honeycomb style Pencil Holder & memo storage box, designed in Fusion360.

Honeycomb Pencil holder
Print time:5 - 7 hours at 100% scale (depending on settings)
Dimensions: 7 x 9 cm (diameter x height)
Weight: 42 grams

Honeycomb Memo Storage Box
Print time: 5 – 6.5 hours at 100% scale (depending on settings)
Dimensions: 9.5 x 9.5 x 7 cm (length x width x height)
Weight: 45 grams

Tip: try calibrating your retraction settings before printing for the best results.

If you have questions, feel free to contact me.

Happy printing

NON-COMMERCIAL USE ONLY


Honeycomb Pencil Holder + Memo Storage Box - set, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4636851.

A Pencil Holder with a honeycomb texture, designed in Fusion360.

Print time: 4 - 6 hours at 100% scale (depending on settings)
Dimensions: 7.2 x 9cm (diameter x height)

If you have questions, feel free to contact me.

Happy printing

NON-COMMERCIAL USE ONLY

Honeycomb Pencil Holder, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4742138.

A Geometric Bowl Planter, designed to be printed in Vase Mode.

It takes about 3.5 - 4 hours of printing.

Size: 143 x 50 mm (diameter x height)

Happy printing

Print settings
0.4mm nozzle
0.2mm layer height
0.6mm layer thickness
45mm/sec print speed
Vase mode enabled

NON-COMMERCIAL USE ONLY

 Geometric Bowl Planter, Vase Mode, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4519145.

A Geometric planter with a twist.

Designed in Fusion360 to be printed in Vase mode.

Dimensions: 12 x 12 x 9cm (100% scale)

I hope you like it

NON-COMMERCIAL USE ONLY

Geometric Planter - Vase mode, Slimprint

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4589512.

A small Fusion Planter I designed to be printed in vase mode.

Dimensions: 11 x 10 cm diameter x height (100% scale)
Print time: 1.5 - 3 hours (depending on scale)

I would recommend 3D printing it at 0.2 - 0.25mm layer height / 0.6mm - 0.8 layer width in order to get a 'sturdy planter' :)

Happy printing


Fusion Planter, "Vase Mode" print

I love designing decorative and useful items for 3D printing

Vases | Decor | Organization 

Slimprint by Erwin Boxen

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like