A small funnel (10mm).

Print :
Resolution: 0.2 mm
Infill: 15%
Supports: No

Small funnel

This is a case for the Flipper Zero WiFi Devboard, that also works with the silicone case for the Flipper Zero.

You'll need two M2.5x10 screws to hold the thing together. If you have clear 1.75mm filament, you can put some in the hole for the LED to work like a fiber optic.

Print :
Resolution: 0.16 mm
Infill: 15%
Supports: Yes

Case for Flipper Zero WiFi Devboard

Flipper_Zero_Wifi_case.step

A clip for a cars sunvisor to attach something to. A garage door remote for instance.

Print :
Resolution: 0.2 mm
Infill: 100%
Supports: No

Sunvisor Clip/Holder

A simple image counter to keep track of ones reamining images of a Fujifilm instax mini cartridge.

You'll need a M2x6 machine screw or some superglue to put the top and bottom together.

Image counter

Image_Counter.stl

Caliper holder for 15mm peg board

A simple dosing funnel for 52mm porta filters

Print :
Resolution: 0.16 mm
Infill: 20%
Supports: No

Porta filter dosing funnel 52mm

A minimalistic stand for the new Nintendo Game and Watch devices.

Print:
Resolution: 0.2 mm
Infill: 20%
Supports: No

Nintendo Game & Watch Stand

A housing for a Raspberry Pi Zero 2 W.

Print:
Resolution: 0.16mm
Infill: 100%
Support: No

Seperate .stl files for the top and bottom half of the housing are included. The housing should friction fit, no screws or glue required.

Raspberry Pi Zero 2 W housing

A tool holder for Creality 3d printer tools and accessories for 15mm peg board.

Print:
Resolution: 0.16 mm
Infill: 20 %
Supports: Yes

Creality 3D printer tool holder for 15mm peg board

A tool holder for the Creality Ender-3 V2.

Print :
Resolution: 0.2 mm
Infill: 20%
Supports: Yes

Creality Ender-3 V2 tool holder

A tool holder for the Creality Ender-3 V2.

Print :
Resolution: 0.2 mm
Infill: 20%
Supports: No

A larger knob for the Creality Ender-3 V2 display unit.

Print :
Resolution: 0.16 mm
Infill: 100%
Supports: No

Creality Ender-3 V2 display knob

A larger Knob for the Creality Ender-3 V2 display unit.

Creality Ender-3 V2 Display Knob

An improved add-on strain relief for the creality Ender-3 S1.

Print :
Resolution: 0.16 mm
Infill: 100%
Supports: Yes

!!! ATTENTION !!!
Please be aware that for very high models (> 250mm) the toolhead cable might be rubbing against the top beam of the printer.
For those large prints it might be better to remove the strain relief for the time being.

Creality Ender-3 S1 improved strain relief

An improved add-on strain relief for the Ender3 S1.

Print :
Resolution: 0.16 mm
Infill: 100%
Supports: Yes

Ender3_S1_ImprovedStrainRelief.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Constance2019