Mount storage right to your printer with the Gridfinity modular workshop storage system - whatever machine you use!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Anycubic Sidecar: https://a360.co/3xonYw4
- Anycubic Top: https://a360.co/3jy22GN
- Lulzbot: https://a360.co/3xobNzx
- Prusa: https://a360.co/3Jzfp47
- Snapmaker: https://a360.co/37Om65m
- E3D Toolchanger: https://a360.co/3rlmn6K

These brackets mount to your 3D printer and allow you to put Gridfinity storage blocks right where you need them! These work especially well for the [Gridfinity 3D-printer accessory kit](https://bit.ly/3jtTfWu).

If you need more adjacent slots, just print multiple baseplates and butt them up against each other. *I STRONGLY recommend magnets or screws so you don't knock stuff into your printer!*

**Anycubic Vyper/Kobra**: Also fits any printer made of extrusion with 6mm slots. Mount to your printer's frame with [M5 hammer nuts for 6mm slots](https://amzn.to/3jzbOZb) and [M5x12mm countersunk screws](https://amzn.to/3xoGLHV). Remember to measure countersunk screws from the TOP OF THE HEAD!

The **sidecar** baseplate mounts to the base frame, parallel with the floor, a lot like the included filament holder. The **top-mount** baseplate mounts on the Z axis crossbeam or base frame. *Make sure the gantry, extruder, and plate don't collide with your Gridfinity!*

**Lulzbot**: Fits the upward-facing edges of the top crossbars. This one is a real pain in the butt to install.

**Prusa**: Slides on over the steel frame, no fasteners required. *THE BASEPLATE AND EXTRUDER MUST BE ON OPPOSITE SIDES OF THE FRAME!*

**Snapmaker**: Mount to the optional enclosure with [M5 hammer nuts for 6mm slots](https://amzn.to/3jzbOZb) and [M5x12mm countersunk screws](https://amzn.to/3xoGLHV). Remember to measure countersunk screws from the TOP OF THE HEAD! I didn't make one for the printer itself, sorry!

**Toolchanger**: Mount to the top of the printer with three button head M3x5 screws. *Don't use longer screws! They won't fit!*

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Printer-Mounted Baseplates

Anycubic Baseplate, Sidecar.stl

2x3x7.4mm Gridfinity Drawers.

Tested in PLA, printed with body cavity facing upwards and with only tiny supports between the gridfinity rows on a Elegoo Neptune 2 model.

Suggest minimal cubic infill (5-10%) with 3-4 outer walls.

 * Added drawer model with thicker walls.
* Refined drawer model for a better fit into the slots horizontally.
* Added two-compartment drawer model.
* Added drawer with a tighter horizontal fit.
* Added double-height drawer model.
* Added Minifinity drawer model.

* Organize your Gridfinity Drawers with Minifinity!
https://social.thangs.com/m/195636

Gridfinity concept by Zack Freedman

Gridfinity Drawers

Gridfinity_Drawers_2x3_Chest.stl

Gridfinity_Drawers_Drawer_Thicker.stl

Gridfinity_Drawers_Drawer_Thicker_Two_Compartment.stl

Gridfinity_Drawers_Drawer_Thicker_Tighter_Fit.stl

Gridfinity_Drawers_Drawer_Double_Height.stl

Drawers_Minifinity_4x6.stl

one of the things that Zacks original divider bins were missing is just some plain jane bins. I've exported a few just from his blank storage templates.

gridfinity plain bins

1x1x6.3mf

2x4x6.3mf

2x5x3.3mf

2x5x6.3mf

1x3x3.3mf

1x3x6.3mf

1x4x3.3mf

1x4x6.3mf

1x5x3.3mf

1x5x6.3mf

2x4x3.3mf

3x4x3.3mf

3x4x6.3mf

3x4x2.3mf

1x2x12.3mf

2x2x12.3mf

1x1x12.3mf

1x1 Gridfinity block for storing up to 10 USB devices as well as 3 Micro SD cards. Simple design set up for fast printing. 

Recommended settings are as follows:

Layer Height: .32mm
Walls: 3
Infill: 10% - 20% (depending on desire)
Supports: No

Drives will sit straight up and down but are intentionally a tiny bit loose - in my experience if they are tight in the socket you end up picking up the whole block instead of the drive you want.

____________________________________________

Find all of my Gridfinity models here:

https://thangs.com/search/%22--thingymaker9000gridfinity--%22?scope=all

--thingymaker9000gridfinity--

____________________________________________

If you find these or anything else I make useful, you can buy me a beer over here:

https://www.buymeacoffee.com/thingymaker9000

Enjoy!

Gridfinity USB & Micro SD Holder

1x1 Gridfinity block for storing up to 10 USB devices as well as 3 Micro SD cards. Simple design set up for fast printing. 

Recommended settings are as follows:

Layer Height: .32mm
Walls: 3
Infill: 10% - 20% (depending on desire)
Supports: No

A Gridfinity adapter is nothing more than the bottom mating portion with a flat top surface. This enables you to fasten whatever you want to a Gridfinity system without needing to 3d model anything specific. 

For example, if you already have a great case for your tool, just glue the tool case to an appropriately sized adapter and bam, now it's a Gridfinity case.

Also included in the download is the Fusion360 .f3d file.

Gridfinity Adapters

Gridfinity Adapter 5x5.stl

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards.

I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around.

Print settings are as usual for my Gridfinity items:

Layer height: .24 - .32
Top / Bottom Layers + Walls: 3 - 4
Infill: 10% - 20%

Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea.

____________________________________________

Find all of my Gridfinity models here:

https://thangs.com/search/%22--thingymaker9000gridfinity--%22?scope=all

--thingymaker9000gridfinity--

____________________________________________

If you find these or anything else I make useful, you can buy me a beer over here:

https://www.buymeacoffee.com/thingymaker9000

Enjoy!

Gridfinity 1x1 Dense 9 Full SD & 9 Micro SD Card Storage

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards.

I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around.

Print settings are as usual for my Gridfinity items:

Layer height: .24 - .32
Top / Bottom Layers + Walls: 3 - 4
Infill: 10% - 20%

Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea.

Gridfinity Dense 1x1 Full SD & Micro SD Storage

Gridfinity Dremel Bit Caddy

Pencil case for your drawing/writing utensils.
You will need to glue the graphite, wood, pencil and metal parts together except for the eraser that you can screw on.
I also put  a piece of foam in the pencil and eraser to protect the point of your pencils.
All is printed with a 0.4 nozzle and 0.2 layer height.
Everything is orientated how i printed it and some pieces will need a small amount of support. 
If you like to sell my models pleas subscribe to my membership plan. 
Thank you. 

Pencil case

pencil.stl

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

**Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.**

* Download and print Gridfinity Drawers here!
https://social.thangs.com/m/188528

Minifinity  |  Gridfinity Drawers Baseplate

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.

P.S. This is really dumb, don't waste your resin on my flights of fancy.

A 1x1 set of Gridfinity bins, sized so that they line up to form tiered rows when arrange by height.

Suggest standard printing profiles.

Gridfinity by Zack Freedman.

Gridfinity | Tiered Bins

Gridfinity_tiered_1x1_sm.stl

A gridfinity printer mounted baseplate for the ender 3

F3D File:https://bit.ly/3rvF33o

Gridfinity Ender 3 Baseplate Sidecar

A gridfinity printer mounted baseplate for the ender 3

A slightly improved version of the gridfinity frame to remove boxes rocking

Gridfinity slightly improved frame (no rocking)

3x4 Frame.3mf

Gridfinity Modified 1x1

Based on the Gridfinity System from Zack Freedman
https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman

Licence:
CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/

Lizenz:
CC BY-NC-SA 4.0
https://creativecommons.org/licenses/by-nc-sa/4.0/deed.de

Änderungen/Changes: Ich benötige andere Maße und habe deshalb die Höhenangaben in 5mm Schritte geändert.

I need other dimensions and changed the height in 5mm steps. Den Absatz, ca. 3mm von oben, auf der Innenseite, habe ich entfernt.

I removed the inner step, 3mm from the top.

Maße/Dimensions:

1x1x15 = Die ersten beiden Zahlen sind gleich wie im bisherigen System, die dritte Zahl ist die Gesamthöhe in mm

1x1x15 = The first two numbers are the same as in the original system, the third number is the total height in mm.

.stp & .stl Dateien

Gridfinity Modified 1x1

Gridfinity-1x1x15.stl

Make your gridfinity system 200%* cuter

Print stack able version with support.

For caps with 4.5mm pitch and 35mm minor diameter


Gridfinity Bottle

Gridfinity Bottle.STL

Gridfinity Bottle Stack.STEP

Gridfinity Bottle non stack.STEP

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. 

Rather than waste space with unused bays, I chopped Zack's original file down into this 2x2 Three-Bay Rack!

#Gridfinity

Gridfinity 2x2 Three-Bay Nipper, Stripper, Plier Rack

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. 

Rather than waste space with unused bins, I chopped Zack's original file down into this 2x2 Three-Bay Rack!

#Gridfinity

This model exist out of 2 parts, the wood part and body part.
You can print multiple body parts in different colors so you can change whenever you like. 


pencil holder pencil

wood.stl

Simple Gridfinity bins with one wall missing. This allows you to slot in larger tools that still need a place. 

I use these for my pneumatic nail guns and staple guns.

Gridfinity Open Ended Holders

Gridfinity Open End Tool Holder 1x5.stl

Gridfinity Open End Tool Holder 4x5 - Regular Height.stl

Gridfinity Open End Tool Holder 3x5 - Regular Height.stl

Gridfinity Open End Tool Holder 2x5 - Regular Height.stl

Gridfinity Open End Tool Holder 1x5 - Regular Height.stl

Gridfinity Open End Tool Holder 5x5 - Regular Height.stl

**This is a 1x1 Gridfinity module for 14 Hex bits**

Gridfinity system by** Zach Freedman**

please visit my Youtube Channel [https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER) :-)


Gridfinity 1x1x1 Hex bit holder x14.stl

**Hex Bit Holder** for the Gridfinity System this 3x1 module holds 46 hex bits

**Please visit my Youtube Channel **[https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER)

[https://www.youtube.com/c/ZackFreedman](https://www.youtube.com/c/ZackFreedman)

Gridfinity system originally designed and made open source by** Zack Freedman **

Gridfinity 3x1x2 Hex Bit Holder x46.stl

Holder 1x1 for an 8mm xacto knife with space for a bunch of No 11 blades.

fusion 360 link: https://a360.co/37Xw98o
Holder by Kasper Tulstrup
Gridfinity by Zack Freedman

#gridfinity xacto holder

Holder 1x1 for an 8mm xacto knife with space for a bunch og No 11 blades.

holder by Kasper Tulstrup
Gridfinity by Zack Freedman

xacto holder

Gridfinity bulk storage of drills from 1.5mm to 10mm in 0.5mm intervals. good for compact storage of all your spare drill bits.

Gridfinity Drill Caddy

Gridfinity 1.5 - 10mm Drill Caddy

I wasn't a big fan of any of the other #Gridfinity compatible AA battery holders, so I decided to make my own.

Made using [brian.kerley](https://thangs.com/designer/brian.kerley)'s [Gridfinity | Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607). Thanks Brian!

Gridfinity 2x1 10xAA Battery Holder

I wasn't a big fan of any of the other Gridfinity compatible AA battery holders, so I decided to make my own.

Made using [brian.kerley](https://thangs.com/designer/brian.kerley)'s [Gridfinity | Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607). Thanks Brian!

Easy to use Fusion360 Gridfinity Templates

-Filled in
-Hollow
-For flat modules

Updates:
-18.03.23:
 -Removed the Screw holes. no one seems to be using them, and it makes the modules easier to design and print

Also available on my Github: https://github.com/KptnAutismus/KptnAutismus

Gridfinity Templates for Fusion360 (updated 18.03.23)

Easy to use Fusion360 Gridfinity Templates

Also available on my Github: https://github.com/KptnAutismus/KptnAutismus

Gridfinity

Most Popular of All Time

Categories

Popular

Personalize

Trending