Zack F

Gridfinity iFixit Mako + ES121 Screwdriver Holders

by
ZackFreedman
Follow
Follow
Remix Model
ZackFreedman
ZackFreedman
|
Image 1 of 6
Gridfinity iFixit Mako + ES121 Screwdriver Holders 3d model
ZackFreedman
ZackFreedman
|
Image 1 of 6
Gridfinity iFixit Mako + ES121 Screwdriver Holders 3d model
2D
3D
Makes
Gridfinity iFixit Mako + ES121 Screwdriver Holders 3d model
Gridfinity iFixit Mako + ES121 Screwdriver Holders - Fits the kit wonderfully! Only issue is that some of the bits with larger tips don't fully seat into their spot. Some quick exactoing should fix that up. - 3d model
Gridfinity iFixit Mako + ES121 Screwdriver Holders - TO GRIDFINITY AND BEYOND! - 3d model
Gridfinity iFixit Mako + ES121 Screwdriver Holders - ~18h at 0.2 20% fill with PLA on Ender-3 v2 - 3d model
Gridfinity iFixit Mako + ES121 Screwdriver Holders - This is sick. Thanks Zach! - 3d model
Gridfinity iFixit Mako + ES121 Screwdriver Holders - Took about 6hrs to print on Ender 3 at 0.28 layer and 0.6mm nozzle. Works well enough with my strebito ifixit knockoff set. - 3d model
This model is restricted by licensing terms. 

Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files:

These holders store the popular, high-quality iFixit Mako screwdriver kit, the old-skool iFixit screwdriver set, and the ES121 open-hardware electric screwdriver. Open-source screwdriver, what a time to be alive.

Print the ones that work with your stuff!

Gridfinity Tips!

  • No brims or support required!
  • Use any filament with an 0.6mm or smaller nozzle.
  • Wider bins can curl, so maximize your bed adhesion if you're going big!
  • All storage blocks are compatible with all baseplates!
  • Most storage blocks are stackable!
  • You can add 6x2mm magnets to the corners! They won't magnetize the contents.
  • You can also use M3 screws in the corners.

788 Likes6.7K DownloadsApril 12, 2022



788 Likes6.7K DownloadsApril 12, 2022
This model is restricted by licensing terms.