WihaHolderv2.stl

This is a holder for the Wiha metric drivers, starting with 3,0 all the way down to 0,7 mm.  

You can print this without any supports- it should work as long as you have good cooling/bridging capabilities.

BlueFruitDiffuser.stl

This is a diffuser that fits over the Adafruit Bluefruit Circuit Playground device.  

This lays over the cover snaps on top of the JST plug, and around the USB connector.

When printing, no supports are required, but you may want to use them if you have trouble with the bridging.

Circuit Playground Bluefruit Stand

I designed this to hold the Adafruit Circuit Playground Bluefruit device. It should also work with the older versions (Express, etc.). 

I recommend 5 perimeters/walls for top, bottom, and outside. 30% infill helps for the bottom as well to weight it down.


BlueFruitHolderv2.stl

3030 Feet Dampner.stl

I use this on my Core XY (with 3030 extrusion) to help dampen vibrations. 

BondhusHolder.stl

This is a free standing holder for the Bondhus Ball Drivers that I use most (4mm, 3mm, 2.5mm, 2mm).  Since I don't really use the other sizes much and space is a premium, I just use it for these sizes. 

Small Lithophane Lamp (75mm Lithophanes)

Lithophane Pencil Cup

Quick Change Sample Spool Holder

E3d Hemera Bowden Mount for Aluminum Extrusion (45 Degree)

Taranis Q X7 Gimbal Guard Protector

Canopy for X Frame Quadcopter 

FPV Pop Up Racing Gate

Soft Mount for Flight Controller (FC) and Power Distribution Board (PDB)

Maker Coin Fidget Spinner

Flywoo LR Explorer ghost antenna mount

2020 Dial Indicator Mount

MC4EX Disconnect Tool

Happy 4th!

3d Printer Glass Bed Brackets

Glowforge Exhaust Port Extender

ADXL345 Mount for Hemera (for auto calibrating Input Shaper)

Wire Management Bracket

CR-10 2020 Top Mount LED

ESC Cover (Diatone Inspired)

Happy4th-Solid.stl

pushconnector.stl

Connector that goes with Greg's Maker Corner Maker Coin. 

GregMakerCoin (original).stl

Greg's Maker Corner Maker Coin for MRRF 2021.

My hobbies are 3d printing, drones, lasers, and electronics.  I design most everything with Open SCAD. 

GregsMakerCorner

Achievements

Seedling

Novice Maker

Explorer

Debutant