Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4295749.
These brackets should work for any bed that is 3mm thick. I used them to mount my glass bed on my Hypercube Evolution. Print out one bracket for each corner, and print out one cover for each bracket. So you should end up with 4 brackets and 4 covers.
Parts Needed: I used a long M3 screw (around 40mm) that runs down to my bed mount. I used the bed mount from the Hypercube Evolution stock design, but any mount that holds an m3 screw should work. For the covers, you will need 8 m3 screws, I'd recommend a length of 6mm but 4mm might also work.
Find the Hypercube Evolution 2020 bed brackets here (file name is bed_bracket_MM where MM is how long you need them): https://www.thingiverse.com/thing:2254103
The brackets should have no problem staying in place and holding the bed with the covers on.