The other DJI FPV camera lens protectors were a bit too heavy. I've updated this one to be lightweight and to NOT have anything showing in the camera lens.

This is the TPU part of the https://www.youtube.com/watch?v=-8oY83eVwng

This was made to rescue other drones https://www.youtube.com/watch?v=-8oY83eVwng

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4225043. DJI FPV Pod for Airplane with Camera angle. Printed in TPU Base and antenna mount can be found https://w

made in tinkercad

My first ever propeller design (so its not that great). I wanted to figure out how to make a toroidal geometry in fusion 360 while also making a propeller I could test on my DJI mini 2. However unfort

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2952852. It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. https://www.t

Display stand for mini 3 drone

40 mm Rifle Scope to DJI Osmo Action Adapter. Might need some love and polish but you gotta start somewhere.

Uses a standard sized servo to tilt an analog fpv cam (any of the standard racing/freestyle sizes should fit) in the pitch axis. Useful for larger frames that want a controllable pitch camera. NOTE:

Clip that fits on DJI Mini 3 drone to allow attachment of string to airlift objects with your DJI Mini 3. Does not interfere with the folding/storage of the drone while installed.

This is my solution to the DJI Mini 3 stationary overheating issue. Attach an 80MM USB fan to this shroud and you have a platform that blows cool air into the mini 3's cooling ports while stationary p

This is a design that I created probably almost a year ago when I first got my DJI wireless mic. I've been selling it successfully on Etsy as well as Amazon for the past few months. When kids are as

FPV antenna mount for Pirx Minx FPV drone

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4499731. DJI Mavic Air 2 & Mini 2 Lanyard Mount It holds itself. You can leave it on the RC all the time. V2 Update

Made this up as the need arose, I put the name of the quad I hang on it in Tinkercad, but here is a blank. This one has worked for the CL1, Cinesplore, Squirt V2, Glide and Slattra frames, I do use T

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4960671. https://youtu.be/PwyWSr8GCUE EDIT* Added a model with the keyring on the opposite side, per a request (RingOnl

hello together This 3D model is a holder for the DJI RC-N1 Remote Control For Mavic 3, Air 2S, Mavic Air 2 and Mini 2/3/3 Pro that is worn around the neck on a strap. It was designed to securely an

its for rc car fpv camera

Model This is a case to suit an Arduino Nano BLE 33 for use as an FPV head tracker. It has openings for the power/data port, a 3.5 mm mono socket and a tactile switch. [Build Video](https://youtu

Makes use of 9g mini servos and the servo arms that come with them. Camera mount is designed for the Foxeer Razer Mini FPV camera or any 22mm size FPV camera

i made this battery for dji mini 2 and se

this was edited in tinker cad when i made the unfolded mini 3 pro model

few models put together to make the combo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1240754. It's finally here. The new FPV-Rover V2.0 https://www.thingiverse.com/thing:2952852 This is a remix of the

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5079366. The mount should be invisible with the Ultra Wide FOV setting. Available in 10degrees tilt as I fly it, but a

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2473152. Feet I designed to the ROTORACER RR210 frame. http://shop.rotoracer.eu/rotoracer-rr210 Re-check the correc

DJI goggles v2 bind tool holder with arduino Dupont cable

This is a simple keychain I made. Its just the DJI logo with some smaller DJI logos engraved on it.

I remixed an already well thought-out design for the Emax Tinyhawk stock carrying case, in order to fit a lot of 1S and 2S batteries and also have space for a set of spares and accessories. It also pr

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1700138. This is a remix of the OpenRC Truggy designed by Steamerzone. http://www.thingiverse.com/thing:378042 The tire

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2478547. This is a mini version of my FPV-Rover V2.0 https://www.thingiverse.com/thing:2952852 The dimension are 10cm

A simple, small and sturdy hanger for FPV drones. It mounts with just one screw and holds the dirty quads away from the wall/cabinet, holding them from one of the motors. It prints fast and can easily

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4407637. Since i want to play with FPV with my GT car based on Tamiya TT01e i designed a custom FPV camera support to anc

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4719170. Why not combine two hobbies, FPV and slot car. Follow me on Instagram for latest news ​https://www.instagram

i made this in tinkercad and a few edits on blender

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4034841. By popular request, here is the Pro model. 3D Laser scanned with a Creaform Handyscan 700 (0.3 mm res) -Mi

this one was also made with the mini 2 battery but not edited in blender it was edited and made in tinker cad

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3669829. What do you do if you have spare parts from another RC project? Right, build another one. I decided to build a

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3338885. DJI Phantom 2 Snap-On Prop Guard. Combined two things 936316 and 3019954. Modified a little to make the combin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3835285. This is the Nerf Dart Launcher for the FPV-Rover (V1.0) http://www.thingiverse.com/thing:1240754 And for the F

Made for freestyle FPV drones

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5022222. 10/25/21 - I discovered the RE 80 frames didn't actually accommodate a whoop board with motor connectors, making

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4568949. Hi there! As i tried mounting the Caddx Vista-camera (identical to the one from the original DJI HD combo), i

mount for DJI o3 20mm split deck version 25mm normal deck

I made this for drones to fly and not have to worry about breaking the camera. Use a small strap to install from side door and pull out with strap for easy use

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2616029. FPV camera mount for Traxxas VXL E-revo 1/16. Made two versions for the cameras i tried. Print it on Flex or

Rapidevolution is line of printable 1S FPV frames.

NEWER VERSION AVAILABLE IN MY PROFILE Motor bell gripper for FPV drones. Makes prop changing easier. diameter is 28mm for my xing-e motors but it fits for many sizes since its