Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4799622.

Thick enough for the average wallet, credit cards, ID's, papers..etc.. 

I printed with 10% infill and it works well for lighter objects. 


Magnets used - https://www.amazon.com/gp/product/B07XRFLTLG/

Magnetic Hidden Storage Shelf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4507093.

Covid boredom led me to this design. :p
And it's subject to change, hence, why I didn't hide the extra LEDs sticking out. 

I started by needing a graphics card support for the sag. This is 80mm tall when put together, so add or subtract height as you need for yours.

There are large and small for both the top part of the case and the GPU support.
You will need to print the GPU_TOP twice for the large. 

There's also a tunnel built in the large support so you can run an LED strip for lights.
It's hard to tell from the video, but it makes it look a lot cooler, in my opinion.

I also threw in the Gears COG for some added flare. 


I only used Cura supports on the large GPU support to keep the light tunnel from collapsing.

Zero infill % on the ceiling piece, 10% on everything else.
I used two small screws to hold the ceiling pieces on through the fan mount area on the case.

https://youtu.be/L5Z-F4tf5PY


GPU Support ice and Case Decoration

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5261104.

https://youtu.be/WAmTqJGdsMQ

The rugged box, itself, is a remix of - https://www.thingiverse.com/thing:4757317

I printed the yellow "inserts" with TPU to keep it from marring the GoPro.

The top of the box was printed at 100% infill with PETG.
The bottom of the box was printed with PLA at 50% infill.
The TPU was printed at 5% infill (the brand I use is fairly stiff).

Check the YouTube link to learn how to make your own form fitted cases! 


Thanks for checking it out!

GoPro Hero 8 Form Fitted Rugged Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4960671.

https://youtu.be/PwyWSr8GCUE

EDIT*

Added a model with the keyring on the opposite side, per a request (RingOnly.stl).

__________________________________________________________________

Storage box for DJI propellers customized with DJI logo and keychain/string-thru added.

Remix of https://www.thingiverse.com/thing:4396939

DJI Mavic Air 2 Propeller Storage Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4460184.

**EDIT** 6/28/20

Fixed the Corsair, Aorus, Intel and Geforce logos to keep the negative spaces of some of the letters connected. I also have left the originals, in case you want to use your own way to fix this issue. 
______________________________

This is still a work in progress.

So, I made these [front panel standoffs](https://www.thingiverse.com/thing:4458146) and it left a gap between the case and the front panel. I don't mind the gap, but I wanted to try to create something to cover it a little bit without losing the airflow gained from the standoffs. 

These are designed to slide right over the standoffs and fill the gap. Though, I haven't yet decided how to cover the center gap - and I honestly don't mind that, either. It almost looks intentional. 

This could do with some LED's behind it, but for now, the light from the front case fans get the job done.

If you're interested, you can message me and I will create a custom design for you of almost any brand logo - within reason. If I can't do it, I can't do it. I'm not a professional, so no promises are being made. But I will try my best and try to get it done in a timely manner.

I have already created a bunch with random branding, check them out, let me know what you think.

Side note - I printed on glass so I could get a smooth face and used tree supports in Cura.
"Super Quality" preset for Ender 3 Pro.

Computer Case Front Panel Standoff Gap Filler (wip)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4792396.

https://youtu.be/h-CZtZ_9O8Q

There are grouped versions and ungrouped.
Backplates names are their sizes. You can use whichever you like. 



***EDIT 3/18

Fixed GEFORCE-FULL floating logo.
If you've downloaded prior to this date, it won't print correctly.


Assorted Keychains

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5179837.

I loved the design of this phone case and wanted to customize it a little bit.
https://www.thingiverse.com/thing:4688933

There are two uploads for the case, itself. One has a block added for easy alignment to center in Cura for Z Hop -- If you watch the video, you will understand.

Thanks for checking it out!

Halo Themed Google Pixel 5 Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4546079.

Just looking to accessorize the Ender 3 a little more.
These are made to be magnetic so that they're easily interchangeable. 
Though, you could just glue them together if you do not have magnets.

[These are the magnets I used.](https://www.amazon.com/gp/product/B07XRFLTLG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) 

Also added a skull option for those of you that like my [Skull Blower Fan Baffle Ender 3 Pro](https://www.thingiverse.com/thing:4110642)  and my [Skull Face QR Cover](https://www.thingiverse.com/thing:4107206)


Thanks and enjoy!

Creality Ender 3 Magnetic V-Slot Logo. Interchangeable. Another Skull.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4052565.

Edit: 1/18/20

The reason for it looking like it won't fit the bed is because I had the skirt enabled in Cura. Just disable and you'll be fine. Disregard my previous comments. Still new to this ;)
___________________________

This is the first thing I have ever designed. I made it in Tinkercad.

A little backstory:

For Christmas this year, I built a toy chest for my 3 year old nephew out of reclaimed wood, and bought him a Nerf blaster to go with it. I wanted the top inside of the chest to display the blaster for him, so I came up with hangers that will hold it even when the lid is closed. (These are easily removable so he can use the chest for whatever else when he gets older.) However, when it came to holding the darts, my first thought was to just use the packaging they came in and screw it into place. But I'm not happy with how it looks (Nor, the placement).

I couldn't find anything for "wall mounting" Nerf darts, so I decided to create my own and post it here for any and all to use.

I printed this with a skirt on my Ender 3 Pro. It came out fine, however, it is a little long.
So, if you're using Cura, push it back on the bed more than you think to get it away from the front edge. 

I noticed that the print was a lot closer to the edge on the actual Ender bed than it was showing in Cura. I have Cura's Ender bed pictured with the location I printed. It should print well if you follow along.

**At the time of posting, I hadn't yet taken pictures of the chest with the dart holder installed. So, if you see the darts held with a clear plastic housing, that's the "before" photo.

I would like to start designing and creating more things. Finally give back to the community I have taken so much from. You are all an inspiration.

Nerf Dart Wall Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4517461.

Thought I would make some custom brackets for my case because my case has the kind that are push-out and I needed to fill some slots.



Custom Rear PCI Bracket for Computer Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4554215.

EDIT*** 8/25

In keeping with using less filament, I've added a second TPU block. This version slides over the original foot, keeping the same ~40mm height, but widening the overall footprint just a tad. This uses a bit less TPU than the first block.

__________________________

EDIT*** 8/24

I've noticed that the foam just doesn't hold up over time.
It flattens out until the feet are touching the table. You can continue to replace the foam as needed, or I've added two models that you can choose from to print in TPU.

One is a block that will work with the original feet. It will take the place of the foam entirely, and still raise the printer ~40mm.

The second is an entire new foot design, designed to use as little TPU filament as possible, but still raise the bed around 30mm - Function over fashion. This does not need to be printed upside down like the original feet were.

______________________________

I noticed my Ender 3 Pro was shaking the desk I have it on during prints, so I wanted to create some kind of dampener without having to spend any money on racquetballs or whatever. I also wanted it raised up so I could store some small things underneath it.

I used the packing foam (~28.3mm thick) that came in the box with the Ender 3 Pro, and cut it to size with an X-acto knife. The 'slot' for the foam is 18mm deep, so, it sticks out about 10mm, raising the printer roughly 40mm total. 

The foam is really strong and great for dampening the motion of the printer. Any strong foam will do, if you didn't save your printer box.

*Print these upside down to save on support filament. 

I designed these in a way that they could be easily placed under the printer without having to screw/unscrew anything or pull the existing pads to get to the rails. Which in turn means, they're easily removed. I just lifted the printer one side at a time and placed them, making sure they slotted into the rails. Not too difficult.

If you are someone who is constantly moving their printer around, you may find these a bit tedious. If I get enough requests, I can make them with T-slot heads and add them for those who want a more 'permanent' foot. In which case, you could probably just super glue the foam in place, though, mine fit snugly without any.

Thanks and enjoy!


***I tried to upload pictures but Thingiverse is giving me a max 500KB error message...?
If/when this gets resolved, I'll update the pictures. But for now, I just turned them into a quick mp4.  https://youtu.be/LX8RX5IWj1A



Easy Ender 3 Feet / Damper (Minimalist) 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4617911.

**EDIT -  11/6/2020

Added a screenshot of the magnets in case the link doesn't work for you.
They are 6mmx2mm
______________________________________________________________

If your hot end fan is overly loud like mine, and you don't want to permanently modify your printer - I've designed an easily installed and removed magnetic fan baffle. 

In the words of Ron Popeil, "Just set it, and forget it. It's that easy, ladies and gentlemen."

[These are the magnets I used from Amazon](https://www.amazon.com/gp/product/B07XRFLTLG) with a dab of superglue. (Non-affliated)

There's one with the logo and one without - respectively named files.
No need for supports, even with the logo. 

The video posted has the audio amplified so you can better hear the difference.

Thanks, and enjoy!

CR-6 se Magnetic Hot End Fan Baffle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4458146.

UPDATE*** 6/14/20
I created some [custom gap fillers](https://www.thingiverse.com/thing:4460184) (wip) to go along with these.

___________________

I noticed my new computer was running really hot when gaming, and I assumed the lack of air intake on the front panel was the culprit. After I removed the front pane entirely, the temps dropped by ~15 degrees. 

However, I didn't want to just leave the front panel off the computer, as it completes the look. And I didn't want to modify the panel by drilling or cutting holes.

I designed these standoffs because it's a reversible modification. They put the panel 30mm off the chassis.

My case is an IBUYPOWER Element MR, though, I'm sure these will work on any other case that has a similar front panel with 10mm holes on the chassis and push pin clips on the front panel. And I believe this case is based on an NZXT case.

I did not necessarily need all 8 to hold the front panel, I just used all 8 so I wouldn't see the other unused pins on the panel showing. 

And I may come back in the future and add something a little more stylish to complete the mod. Stay tuned.

I imagine these would look really nice, almost stock, with an SLA printer.


Here are the Cura print settings I used, but you can modify however you like:

-Super Quality (Low quality for me would not print the pin parts correctly on my Ender 3 Pro)
-100% infill
-Tree supports enabled

Computer Case Front Panel Standoff

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4623777.

This is a remix, but I cannot click to add that it's remix.
The original:

https://www.thingiverse.com/thing:3537808

Ender 3 PRO Skull Compact SD Card Adapter Housing

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4645529.

https://youtu.be/psF4Yy1BlmM

***EDIT

Added mirrored versions so that the nut would be towards the outside instead of the inside.

**These work best printed in PETG with threaded inserts pushed into the holes.
Otherwise, sagging can occur. 

___________________________________________________________

A GoPro mount that takes place of one of the bed pull handles found here -
https://www.thingiverse.com/thing:4638063


Remixed from these two -
https://www.thingiverse.com/thing:81333
https://www.thingiverse.com/thing:4602434

CR-6 se GoPro Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4965939.

These are just some pieces I made for you to test out the Z Hop feature in Cura. Check out the video for some instructions!

Thanks for looking!

Z HOP test thingies

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4541584.

Was wanting to make something decorative to hold my guitar picks.
Found the [Lisa Skull](https://www.thingiverse.com/thing:2756226) and redesigned it to be a box that works with a magnetic lid.

[These are the magnets I used.](https://www.amazon.com/gp/product/B07XRFLTLG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) 

Add a dab of super glue to keep them in place. 

Thanks for checking it out, and enjoy!

https://youtu.be/Ok_o2By6RPQ

Skull Magnetic Storage Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4768515.

Simple Gopro mounted phone holder.

The inner dimensions are 14.5x83mm.

Gopro Phone Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5343231.

Simple cable tie down rail. I have only printed the short one without supports and it turned out fine. Use your best judgement on whether or not you need them on the larger sizes.

Multiple sizes.

Short - 80mm

Med - 150mm

Long - 200mm

Cable Tie Down Rail 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4113145.

I just measured these out and put them all in one place for an easy grab. 

I also notched the two inserts titled "Power Supply" to adjust for the screw heads holding the power supply on. Remove safely from bed as not to bend. 

I aligned some to 45 degree angles for printing, although it is not necessary to print that way. They will all fit front to back on the Ender 3 bed, you just have to turn off your rafts (i.e. skirt).

Check the picture for their locations.

Enjoy!

Ender 3 Pro Push-in V-slot covers (minimalist)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4490002.

I have a Radio Shack soldering station and I just bought a set of tips for it, and wanted a nice way to organize and display them. 

So, I made these holders that hang over the side, or between the two around the back of the station (inside clip to clip is 4in or 101.6mm).


Supports are necessary.


Solder Tip Holder (Hangs on Station)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4674997.

A few risers for the Series X.

There are some that are just a ring to save filament. I colored my lettering in with sharpie.

LED's could be placed in the one with holes.

Thanks and enjoy!

Xbox Series X Risers II

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4981997.

I designed these mainly for children to play with and to recycle failed prints/scrap filament. Although it doesn't use much, it's a fun way to get rid of some of that scrap lying around. Refer to the video for details.

Also, the scale is intentionally a little small for small hands. I have a 5 year old nephew who's hands can grip them perfectly when scaled up 125%

Thanks for checking it out and enjoy!


Maracas (For Recycling Failed Prints)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4600609.

I remixed [EBLux's Wall Safe Quest / Rift S Controller Mount](https://www.thingiverse.com/thing:4335450) to be wall mounted by screws, or in my case, shelf mounted.

I changed the base to 19mm to fit within the shelf's edge and added mounting holes for screws.


Oculus Controller Wall/shelf Mounts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4577550.

Lensfort did a great job of designing [THESE](https://www.thingiverse.com/thing:3678073) wall mounts, I just wanted to make a cleaner looking version by hiding the screw mount holes. The logo/cover is a push-in for easy removal, in case you want to move/remove the mounts in the future. So, there's no need to glue it in place. But you can if you like. I also made the logo notched in case your screw heads aren't flush.



Oculus Controller Wall Mount (hidden screws)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4603232.

*All links are non-affiliated. 

Just picked up this [JLAB's microphone](https://www.bestbuy.com/site/jlab-audio-talk-professional-plug-play-microphone/6417453.p?skuId=6417453) and wanted to make use of a pop filter I already had lying around.
 
You can get a similar pop filter [here on Amazon.](https://www.amazon.com/GOMILE-Miccrophone-Windscreen-Isolation-Recording/dp/B07LDSVLK9/ref=sr_1_14?dchild=1&keywords=pop+filter&qid=1600719289&sr=8-14)

I'm sure this bracket will work with other mics, if there is something the clip will fit onto.
For reference, the part of the microphone that the bracket is hanging onto is roughly 21mm deep, 2mm thick. So, the bracket should clip to anything in that general size. 


*It is already oriented the best way to print, IMO. I turned on supports just to be safe - Your results may vary.

Pop Filter for JLab Audio - TALK Professional USB Microphone

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4821623.

Just another way to personalize your printer.

For certain, fit's Ender 3 Pro spool holder and CR-6 se. 


Creality Spool Holder Cap (vanity)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4620234.

Just a cable clip that is stronger and points the cable upwards over your head.

This is a remix of two things, but as of right now, I can't click "This is a Remix" when uploading. Thingiverse is having problems, apparently. Which is highly unusual. This never, ever, ever happens. Ever.

Anyway, these are the two things I remixed from. 

https://www.thingiverse.com/thing:4191013
https://www.thingiverse.com/thing:4182113

Oculus Rift S Cable Route Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4634825.

This is designed to be used with a top-mounted spool holder, such as that from the Ender 3.

You can get all the necessary Bowden parts here (non-affiliate link)
https://www.amazon.com/gp/product/B07PV9LCLY

And I used this to connect to the filament out sensor -
https://www.thingiverse.com/thing:4617010


This is my original design that snaps into place and is smaller - 
https://www.thingiverse.com/thing:4630555

I printed at 20% infill, but turned the wall line count up to 4 so that the arms would be essentially 100% infill for strength.

Thanks for checking it out!

Push-on Filament Guide for CR-6 SE (2.0)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4852832.

Headphone Hanger designed to work with a floor lamp I have.
Should fit any cylindrical structure that is 22mm or below in diameter. 

I used these - 

M5 Threaded Inserts - https://www.amazon.com/gp/product/B01IYMMJRW

M5 Screws - https://www.amazon.com/gp/product/B07WZHN2XS


I still cannot use the "This is a Remix" after several months..
But this is technically a remix of -  https://www.thingiverse.com/thing:2268329


If you enjoy my designs, please consider making a small donation via Thingiverse, or subscribing to my YouTube channel. 


Headphone Clamp Hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4784004.

Simple Key Rack


I still cannot choose that this is a remix when I upload, but it is technically a remix using this hook - https://www.thingiverse.com/thing:1081862

______________
**EDIT 3/23/21

Added a blank version for those who want to add their own text.

Simple Key Rack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4579997.

I wear a set of wired headphones connected to my computer while I game in my Oculus Rift S. Having both the cables running from the PC is a bit of a headache, and I couldn't find a reliable cable clip that brings both to the back of the headset, so I designed this one in a single and a double version.

I'm sure this will work with a variety of VR headsets.


NOTICE** This is intended to be used with a rubber band to hold it in place so as to have some give to prevent too much tension on the cable. I would suggest taking it off when not in use to avoid the rubber band potentially deforming the padding. Refer to the second picture to understand what I'm referring to.


Cable Clip for VR Headset (dual and single)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4630555.

**UPDATE 10/27

A redesigned version is also available - https://www.thingiverse.com/thing:4634825
___________________________________________________

**This is a work in progress!
The design is subject to change. Stay tuned!

This is designed to be used with a top-mounted spool holder, such as that from the Ender 3.

You can get all the necessary Bowden parts here (non-affiliate link)
https://www.amazon.com/gp/product/B07PV9LCLY

And I used this to connect to the filament out sensor - 
https://www.thingiverse.com/thing:4617010

Using a brim and supports gave me best results.

Thanks for checking it out!

Push-in Filament Guide for CR-6 SE (WIP)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4638063.

Longer, customized bed pulls for the CR-6 se..

Remixed from: https://www.thingiverse.com/thing:4602434



CR-6 se Bed Pulls

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4600600.

This is a piece I designed to work with [Lensfort's Oculus Rift S, Quest, CV1 Wall mount](https://www.thingiverse.com/thing:3678066). If you print it oriented the way I've shown, with the flat side with holes down, you shouldn't need supports.

It gives you the option to mount it on a 45 degree angle/shelf. 
I used these [M5 brass inserts](https://www.amazon.com/gp/product/B01IYMMJRW/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1) from Amazon (non-affiliated) and my soldering iron to place them, but any threaded inserts with an outside diameter of around 6mm will work.

There are two here because I originally designed one to work with wood screws that had a ~7mm head, but realized afterwards that I only had wood screws with an ~8mm head, so I just uploaded both.

This is the [M5 screw set](https://www.amazon.com/gp/product/B07WZHN2XS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) I purchased from Amazon (also non-affiliated) to use with the M5 brass inserts.

Oculus Helmet 45 Degree Mount (For use with thing:3678066)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4653212.

Just a simple set of risers for the Xbox Series X.

For fear of it getting scuffed, I just designed these real quick to lift it up about
15mm. I printed in TPU but if you use something like PLA, I would suggest gluing foam or something soft to them to keep from leaving marks on the console.

I added a center piece for support, but in my opinion it's not necessary. 

Also added a version that is just a single corner foot. Print 4 of them.

Xbox Series X Risers 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4739950.

Simple cable guides. One with my Youtube logo, one without.

Print at 100 infill for extra strength. 

Cable Management Guides

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5231265.

Remix of - https://www.thingiverse.com/thing:4695125

I made the concave wall in the center of the joystick a bit thicker/deeper.
And rounded out the top of the joystick, where the original was more flat.

Works well when painted/smoothened. 

Check out the video for details!


Xbox One Controller Joystick

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4922882.

Simple mountable fishing rod holder. 
Mine is mounted to the side of a Chinese scooter. Works great and reliable.
Check out the videos for more details.

Printed with supports only to retain mounting holes.

Thanks!

Mountable Fishing Rod Holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4723192.

80mm GPU support.

Cyberpunk 2077 GPU Support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4650589.

Designed to be printed with TPU. 
There are 2 versions, one is 32mm tall the other is 46mm tall.
You will need to print 4 of either.

Dampener Riser Feet for CR-6 se or Ender 3  

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4626778.

Made this to manage my USB mic cable along the boom arm.

There are several brands of this same boom arm, it should fit them all.

https://www.amazon.com/dp/B01GRMF4RS (non-affiliate)

Neewer NB-35 (and others) Microphone Boom Arm Cable Management Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4695952.

Holder for a 1 and 1/4inch PVC pipe to hold rolls of filament in a dry box.

These use a 5MM nut and bolt (used soldering iron to push the nut in). 

Mark holes on your box and then drill them out. It creates an airtight seal, but you could add something between as a gasket of sorts if you don't feel that yours is.

Dry Box PVC or Rod Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4612479.

There aren't nearly as many places to put these covers on the CR-6 se as there is for the Ender 3, but at least it's something.

I titled the files by where they should go, so it should be pretty self-explanatory. 

*If you want the front and rear of the middle section to be covered, print the middle set twice. 

*If your spool holder is clipped on the rear side, print the middle set three times, as one set can just go to front left. **You'll only need one of the rear pieces if your spool holder is clipped back there (BackSingle). 

CR-6 se Push-in V-slot Covers (minimalist)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4839320.

Wall mount designed specifically for a WD Black but I'm sure it will work with others.
Inner dimensions are 20x90mm 

Designed for minimal filament use.

Wall Mount for WD BLACK (and others) External Hard Drive

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4638026.

Just a simple coupler for the M6 Bowden style fitting.

100% infill with supports

Bowden Fittings Coupler

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4909514.



A simple mounting bracket for stabilizing desks or the like against the wall.
Check the video for examples.



Desk Stabilizer Bracket

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4628478.

Longer, customized bed pulls for the CR-6 se..

Remixed from: https://www.thingiverse.com/thing:4602434



CR-6 se Bed Pulls / remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4638073.

Just a simple coupler for the M6 Bowden style fitting.

100% infill with supports

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4776419.

Will hold a plethora of things. But I designed it to hold my Hisense TV remote with some extra space for different sized remotes.

Wall Mounted Remote Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

triumphinglosersbusiness

Magnetic Hidden Storage Shelf

GPU Support ice and Case Decoration

GoPro Hero 8 Form Fitted Rugged Box

DJI Mavic Air 2 Propeller Storage Box

Computer Case Front Panel Standoff Gap Filler (wip)

Assorted Keychains

Halo Themed Google Pixel 5 Case

Creality Ender 3 Magnetic V-Slot Logo. Interchangeable. Another Skull.

Nerf Dart Wall Holder

Custom Rear PCI Bracket for Computer Case

Easy Ender 3 Feet / Damper (Minimalist)

CR-6 se Magnetic Hot End Fan Baffle

Computer Case Front Panel Standoff

Ender 3 PRO Skull Compact SD Card Adapter Housing

CR-6 se GoPro Mount

Z HOP test thingies

Skull Magnetic Storage Box

Gopro Phone Mount

Cable Tie Down Rail

Ender 3 Pro Push-in V-slot covers (minimalist)

Solder Tip Holder (Hangs on Station)

Xbox Series X Risers II

Maracas (For Recycling Failed Prints)

Oculus Controller Wall/shelf Mounts

Oculus Controller Wall Mount (hidden screws)

Pop Filter for JLab Audio - TALK Professional USB Microphone

Creality Spool Holder Cap (vanity)

Oculus Rift S Cable Route Clip

Push-on Filament Guide for CR-6 SE (2.0)

Headphone Clamp Hanger

Simple Key Rack

Cable Clip for VR Headset (dual and single)

Push-in Filament Guide for CR-6 SE (WIP)

CR-6 se Bed Pulls

Oculus Helmet 45 Degree Mount (For use with thing:3678066)

Xbox Series X Risers

Cable Management Guides

Xbox One Controller Joystick

Mountable Fishing Rod Holder

Cyberpunk 2077 GPU Support

Dampener Riser Feet for CR-6 se or Ender 3

Neewer NB-35 (and others) Microphone Boom Arm Cable Management Clip

Dry Box PVC or Rod Holder

CR-6 se Push-in V-slot Covers (minimalist)

Wall Mount for WD BLACK (and others) External Hard Drive

Bowden Fittings Coupler

Desk Stabilizer Bracket

CR-6 se Bed Pulls / remix

Bowden Fittings Coupler

Wall Mounted Remote Holder