tracking pixel
profile hero image
Jonathan K
Jonathan K

Keep Making

Designer posts

Multigrid Is Getting An Upgrade

Multigrid Is Getting An Upgrade

Hey Makers, I know I’ve been quiet these last few weeks… But don’t worry, I haven’t disappeared. In fact, I’ve been silently planning the future of the Multigrid Bin System. And oh boy! We’ve developed Multigrid to a level that’s NEVER been seen before. It’s basically a modular system built into another modular system. Now keep in mind… there are still months of development and testing to be done. But Stage 1 is ready 🎉. It’s called the Multigrid Foundational Update... This update will lay the groundwork for some insanely flexible systems to be built upon. So over the next week, we’ll be uploading about 784 parts. And once everything is up, I’ll show you what has changed and what else to expect in the future. Thanks for your patience 💖. And Keep Making! Jonathan PS - Some of the dimensions are going to change in this update, but you’ll always be able to find the old parts in the Multiboard Legacy Listing: https://than.gs/m/991330

🥇 The winner of the Ambitious Print Contest

🥇 The winner of the Ambitious Print Contest

🥇 The winner of the Ambitious Print Contest is @V with 12 votes. @V will be getting the $200 voucher. I also want to give an honorable mention to @smering and @lirdecat, I’ve seen some insane prints from them! In the next Multiboard contest, I’ll be giving away bigger prizes, not only for first place, but also for second and third. Oh and btw, these giveaways are only possible because we’ve been doing well in the Thangs Contests. This week we’re not in the top 3, but we’re pretty close… So If you want to help us get to the top, download and leave a like on these specific Multiboard parts: Offset Snaps Removal Tool: https://than.gs/m/993368 8 mm, Cross Quad Offset Snap: https://than.gs/m/993369 15 mm, Cross Quad Offset Snap: https://than.gs/m/993370 Triple Snap Connector: https://than.gs/m/993637 Multiboard Legacy Parts: https://than.gs/m/991330 Let’s see if we can make it — 15 hours left 💪 Thanks a lot and Keep Making!

New “Removable” Multiboard Offsets [HUGE Update]

New “Removable” Multiboard Offsets [HUGE Update]

We heard you loud and clear… The Mounting Offsets were semi-permanent, and it kinda sucked… Because if you tried (with a lot of struggle) to remove them, they would probably break.  So here you go… We’ve made THREE major updates to improve the mounting parts… First… we redesigned the Mounting Offsets, along with all the Part A and Part B pieces, to be more easily removable. 🛠️ (The Part B’s also come with 4 different tolerances to match your type of printer.) Second… we designed a new “Cross” Quad Offset that firmly connects 4 tiles together.  This new Offset is much easier to set up and stronger than what we had before. And third… we created a new “Removal Tool” to help you remove Single, Dual, and even Quad Snaps from the Offsets. These new parts can be found, all for free, in the Parts Library at https://www.multiboard.io/parts-library/mounting-systems I’ve also created a short video to show you how all these new parts work, click here to watch it: https://www.youtube.com/watch?v=D6QzwYYZiBE Keep Making! Jonathan PS - Btw the old Offset Snaps still work fine, so only replace them if you want your Multiboard to be removable. Also, keep in mind these new Snaps are NOT compatible with the old DS Snaps, so if you still need access to the old parts, you can find them in the Multiboard Legacy Parts: https://than.gs/m/991330 PPS - Aaand finally… The “Ambitious Print Contest” ENDS tomorrow. Make sure to post pictures of your craziest print beds in the Discord, and react to your favorite posts by the community.

The “Ambitions Print Contest” Starts NOW! 🎉

The “Ambitions Print Contest” Starts NOW! 🎉

To participate in the Ambitious Print Contest, you will have to share an image of your most ambitious & successful Multiboard prints, fresh on the print bed. This could be a crazy stack of tiles, a rainbow array of Multiboard parts, or just over 100+ parts in a single print! Then submit your images in the Discord, join here: https://discord.com/invite/Ezx9hUD The competition will end in six days on Wednesday 17th. And the person with the most votes by the community will get a $200 voucher for 3DJake 💸.  It’s going to be fun to see how far you can push it. Keep Making! PS - Later today I’ll be announcing some new “Removable” Offset Parts for your Multiboard. It’s going to change the way you mount your Multiboard, so keep an eye out for the announcement.

Our First Multiboard Competition Starts Friday 🏆

Our First Multiboard Competition Starts Friday 🏆

Last week, thanks to your help, we won the Thangs Rising Star Contest. And as promised, I’m giving away the prize money. To make this happen… we will have our first “Multiboard Ambitions Print” Competition 🏅, on Discord, Starting on Friday 12th. To participate, you will have to share an image of your most ambitious & successful Multiboard prints fresh on the print bed, be it a 10+ tile stack, a random array of Multiboard parts, or just over 100+ parts in a single print. Show us how far you’ve been pushing it. You then submit it in the Competition Discord channel which will be made once the competition starts. The person with the most votes by the community will get a $200 voucher for 3DJake. On Friday I’ll let you know more details, so keep an eye out for the announcement. Btw, these giveaways are only possible because we’ve been doing well in the Thangs Rising Star Contest. This week we’re in 3rd place and if you help us get to 1st or 2nd, I’ll be able to give away more and bigger prizes for our next Multiboard competition. If you want to help out… (1) follow me on Thangs, (2) download and leave a like on this Multiboard part: 4x4 Push-Fit Bracket: https://than.gs/m/989098 Thanks a lot 🙏 and Keep Making!

2 New Multiboard Parts 🤩

2 New Multiboard Parts 🤩

Hey! 2 new Multiboard parts have been added (they all have descriptions and “in-action” images 🤯). 1. Push-Fit Bracket: https://than.gs/m/989098 Inspired by @RightiousNewb, the “push-fit bracket” connects to your Tiles and holds Multigrid Bins.  (It also has pegboard holes everywhere, allowing you to attach other parts to it) 2. Weight Bearing Directional Snap: https://than.gs/m/989145 Made in collaboration with @Stella, this snap can take WAY more weight than regular snaps, but only in one direction. This may become the new standard snap, so I recommend you check it out. Keep Making! Jonathan P.S. If you’ve uploaded Multiboard remixes to Thangs, use the tag “MultiboardRemix”. This is now the standard tag to search for community-created designs. P.P.S. We're making WAVES in the 3D printing world 🌊. Thangs has given us our very own Multiboard category, and soon we’ll have subcategories. “Multiboard” is also the second most searched word after “Gridfinity”. Let’s keep crushing it 💪, this is only the beginning!

Multigrid "Click Locks" Now Added

Multigrid "Click Locks" Now Added

New Click Locks added: https://www.multiboard.io/parts-library/multigrid#:~:text=View%20All-,Multigrid%20Bolts,-Double%20Thin%20Head (This actually now have full descriptions and demo images)P.S. Happy New Year! - I can't wait to see what our amazingly creative community creates in the coming year!Thank you for all your support!

Everything New With Multiboard In The Last Week

Everything New With Multiboard In The Last Week

This last week has been a rollercoaster…  We’ve had hundreds of people join this community and we’re trending all over Thangs, but we’ve also had many unexpected problems and bugs. Despite everything going on, I’ve been working almost non-stop to fix stuff and bring you the most useful Multiboard parts, collections, and resources I can, including… 48 new Multiboard tiles The “Mini Multiboard” Starter Pack A stack printing guide and test piece Multiboard tutorials videos And much more Discover everything new this week at https://www.multiboard.io/updates/change-log-1 Keep Making! Jonathan PS - We also completely obliterated the Thangs “Rising Star” contest! Winning at 13 thousand points. Thank you so much to everyone who helped out. PPS - There will be Gridfinity compatibility parts coming soon. And a new way of mounting Multigrid bins (you’re going to love this one). PLUS a whole bunch of Multiboard push-fit accessories. Stay tuned!

3D Printing World
Built Over B
DaveMakesStuff
8,753
0
730,749
381,320
264
25,180
Sort By: