This is a simple keychain I made.
Its just the DJI logo with some smaller DJI logos engraved on it.

simple DJI keychain with DJI engraved.

sleutelhanger voor lander v6.stl

Here I designed a phone stand in fusion 360.
I used my own phone(samsung s20) for reference.
My phone does have a case protecting it.
I made it so the usb charger can pass through the hole in the file so it also servers as a charging port.
I made it angled at 60 degrees.
This is one of my first times using a CAD software since I've only recently learned about this in school.(I'm 15yrs)
For infill patern I used lines but I'm sure any other patern wil work.
Just make sure the infill density isn't too low, I recomend around 40%
I printed it on its side and sure enough there was some stringing.
The lines sticked a little to well to the printbed causing some layers to be missing on the print.
As far as suport goes, please make sure you don't under-estimate youre printers abilitys and put the support to the max. Other wise it's going to be a real pain in the a$$ to remove them all.

I printed this on a BQ Witbox 2 at school.
Bed leveling took some time but once the print started it was fine.

You can download 2 files: stand v2 is a little narrow for the phone to slide in.
Mine nearly fitted but my teacher had a slimmer phone so i gave the v2 to him.

The v2 is available in the zip file when you download the v3.

I added another stand but with a little more clearance; phone stand v3 has the most clearence.

please feel free to give some feedback on how I can improve.

phone stand for semi-large phones

Here I designed a phone stand in fusion 360.
I used my own phone(samsung s20) for reference.
My phone does have a case protecting it.
I made it so the usb charger can pass through the hole in the file so it also servers as a charging port.
I made it angled at 60 degrees.
This is one of my first times using a CAD software since I've only recently learned about this in school.(I'm 15yrs)
For infill patern I used lines but I'm sure any other patern wil work.
Just make sure the infill density isn't too low, I recomend around 40%
I printed it on its side and sure enough there was some stringing.
The lines sticked a little to well to the printed causing some layers to be missing on the print.
As far as suport goes, please make sure you don't under-estimate youre printers abilitys and put the support to the max. Other wise it's going to be a real pain in the a$$ to remove them all.

I printed this on a BQ Witbox 2 at school.
Bed leveling took some time but once the print started it was fine.

You can download 2 files: stand v2 is a little narrow for the phone to slide in.
Mine nearly fitted but my teacher had a slimmer phone so i gave the v2 to him.

I added another stand but with a little more clearance; phone stand v3 has the most clearence.

please feel free to give some feedback on how I can improve.

phone holder v3.stl

Hello, if you want to find more files please visit:https://www.printables.com/@TWTJES.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

vdk.liam

Achievements

Seedling

Debutant

simple DJI keychain with DJI engraved.

phone stand for semi-large phones