Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4232161.

Based on design of [3D Printed Marble Climber](https://www.thingiverse.com/thing:3160563) by [3DprintedMarble](https://www.thingiverse.com/3DprintedMarble)

No glue, no sandpaper required.

Things that you need:
1. [Steel Balls  6-9mm](https://www.aliexpress.com/item/32857044601.html)
2. [Motor with Gearwheel 15rpm DC 3-5V](https://www.aliexpress.com/item/32980213040.html)
3. [2 Pin ON-OFF Switch](https://www.aliexpress.com/item/32879048524.html)
4. USB charger
5. (optional) [2 Pin Connector Male Female](https://www.aliexpress.com/item/33023814290.html)

Link to [Upgraded version with Battery and Charger](https://www.thingiverse.com/thing:4240798)

Gcode files for Creality CR-10 attached.

<iframe width="560" height="315" src="https://www.youtube.com/embed/jmaalhMYjbc" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/-ch_4pC0cIE" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Marble Climber Motorized Redesigned

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4396745.

Yet another Phone Stand. This little one holds up your tablet or phone on any specified angle. You can even hang the stand with your phone on the laptop screen or in the front seat of the airplane. It will be convenient when watching a video, shooting with a camera, etc.

Version with metal bolt and nut is [here](https://www.thingiverse.com/thing:3965509)

#### Update from 27 Jun, 2020
_PhStWB5-*.STL_ - version with extended legs and additional **folding sub-legs** allows connecting charging cable from the bottom.

Foldable Phone Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4937150.

I like the idea of Turbo Funnel by Mishkin2.
My one should work similar way

Another funnel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3413199.

Tube Boxes for Storage of Incenses.
Lengh: 240mm

Chest Box for Storage of Incenses: https://www.thingiverse.com/thing:3417980


Tube Box for Storage of Incenses

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3965509.

One more Phone Stand. This little one holds up your tablet or phone on any specified angle. You can even hang the stand with your phone on the laptop screen or in the front seat of the airplane. It will be convenient when watching a video, shooting with a camera, etc.

You need M5 bolt (length - 40mm, thread diameter - 5mm) with the corresponding nut.

## Update from 16 Nov, 2019
_PhStWB3-all.STL_ - new version with extended legs and additional **folding sub-legs** allows connect charging cable from the bottom.

Fully printed design is [here](https://www.thingiverse.com/thing:4396745)

Adjustable Foldable Phone Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4048409.

Reliable and convenient Storage Box for 6 MicroSDs.

Diameter: 51mm
Height: 17mm

MicroSD cards holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3627007.

Ugrinsky Vertical Axis Wind Turbine (VAWT).

You need a couple of small bearings: 
D = 5mm, d = 2mm

(f.i. https://www.aliexpress.com/item/-/32941620883.html)

Insert a small piece of standard 1.75mm filament at the top and the bottom to keep turbine at place. So you will be able to remove easily turbine from holder.
To make big designs more stable it's better to pull filament throughout (from the top to the bottom) and fix it with glue or melting.

If you prefer design without bearings look at https://www.thingiverse.com/thing:3625816

Ugrinsky Vertical Axis Wind Turbine VAWT

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4260565.

One more useless Marble Run Machine.

Things that you need:
1. [Motor with Gearwheel 15rpm DC 3-5V](https://www.aliexpress.com/item/32980213040.html)
2. [2 Pin ON-OFF Switch](https://www.aliexpress.com/item/32879048524.html)
3. Any power source like USB charger 
4. Some wires
5. (optional) [Steel Balls D=10 mm](https://www.aliexpress.com/item/4000510174159.html)
6. (optional) [2 Pin Connector Male Female](https://www.aliexpress.com/item/33023814290.html)

Instead of Steel Balls you can print Marbles on your printer.

<iframe width="560" height="315" src="https://www.youtube.com/embed/YfiTbpwWWzI" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Spiral Marble Run with Motor (USB)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3338885.

DJI Phantom 2 Snap-On Prop Guard.
Combined two things 936316 and 3019954.
Modified a little to make the combination Snap-On.

DJI Phantom 2 Snap-On Prop Guard

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3630358.

Big beautiful flower rotating by easy wind.

Based on idea of vertical axis wind rotating turbine (VAWT) by Ugrinsky.

You need:
1) One bearing 608  (D=22mm, d=8mm, h=7mm),
2) One bolt (D=8mm)
3) One nut (D=8mm)

Dimensions:
Height - 198mm
Max width - 284mm

Could be printed well on big 3D printer like Creality CR-10

Big Flower rotating by wind

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4277845.

Supposed to be used with [Rubber Band For Slingshot 3050](https://www.aliexpress.com/item/32907909084.html)

The Slingshot can be reinforced with a shaft (D = 8 mm).
Support needed only for parts named First and Second.

Tension system for this thing is [here](https://www.thingiverse.com/thing:4304902)

Be careful! Never target on people or animals! Use it at your own risk!



Slingshot Arbalete

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3417980.

Chest Box for Storage of Incenses.

__Big__: 240mm x 100mm x 50mm

__Medium__: 225mm x 90mm x 45mm

__Small__: 210mm x 80mm x 40mm

__Tiny__: 200mm x 70mm x 30mm

Wall thickness: 1.6mm
Hinge stick diameter: 2mm (or you can use a piece of filament 1.75mm instead, melt both ends to fix them in place)

Tube Boxes for Storage of Incenses: https://www.thingiverse.com/thing:3413199 

Chest Box for Storage of Incenses

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3403377.

Mavic 2 LED Reflector redirects bottom light into forward direction.



Mavic 2 Bottom LED Reflector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4371562.

Universal Cap Holder Kit for 4 types of Nikon Photo Lenses:
1. 18-55
2. 50
3. 70-300
4. 11-16

Solid Design is [here](https://www.thingiverse.com/thing:4360888)

Nikon Universal Cap Holder Kit

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3398660.

DJI Mavic 2 Bright Forward LED Light with BL-5B battery and USB charger

Components used:

1) LED Chip 1W Natural White
https://www.aliexpress.com/item/High-Power-LED-Chip-1W-3W-10W-20W-30W-50W-100W-LED-Bead-Natural-Cool-Warm/32705751357.html?spm=a2g0s.13010208.99999999.260.33f13c000lh94W

2) BL-5B Battery
https://www.aliexpress.com/item/-/32837886482.html?spm=a2g0s.13010208.99999999.266.33f13c000lh94W

3) Lipo Battery Charging Board
https://www.aliexpress.com/item/-/32874577354.html?spm=a2g0s.13010208.99999999.272.33f13c000lh94W

4) Toggle Switch 2 Position 
https://www.aliexpress.com/item/20pcs-SS12D00G3-2-Position-SPDT-1P2T-3-Pin-PCB-Panel-Mini-Vertical-Slide-Switch-Favorable-Price/32799198160.html?spm=a2g0s.13010208.99999999.278.33f13c000lh94W

5) Some wires

Total price is less than $5. Most expensive part is battery $3. New battery allows to be on for more than an hour.

Attach some metal plate to the back of LED for heat dissipation to avoid flickering. I used a piece from paper knife.

Or simply use holder for 25mm torch if have one.


DJI Mavic 2 Bright Forward LED Light with battery and charger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4304902.

Tension system for the [Slingshot Arbalete](https://www.thingiverse.com/thing:4277845)

Things that you need:
1. Bearings 608 - 4 pcs
2. Bolt M80 60mm
3. Bolt M80 30mm
4. Nut M80 - 2 pcs
5. Bolt M30 40mm - 2 pcs
6. Nut M30 - 2 pcs

Grind/sharpen about 2mm on side of the long bolt M80 with rasp or whetstone

<iframe width="560" height="315" src="https://www.youtube.com/watch?v=5DLHZUKKQM4" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>


Tension system for Slingshot Arbalete

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4240798.

No glue, no sandpaper required.

Things that you need:
1. [Steel Balls  6-9mm](https://www.aliexpress.com/item/32857044601.html)
2. [Motor with Gearwheel 15rpm DC 3-5V](https://www.aliexpress.com/item/32980213040.html)
3. [2 Pin ON-OFF Switch](https://www.aliexpress.com/item/32879048524.html)
4. USB charger
5. [BL-5B Battery](https://www.aliexpress.com/item/32816526742.html)
6. [TP4056 5V / 1A Lipo Battery Charging Board](https://www.aliexpress.com/item/32874577354.html)
7. Some wires

Link to [Verison without Battery](https://www.thingiverse.com/thing:4232161)

<iframe width="560" height="315" src="https://www.youtube.com/embed/Cq5JdncEsMg" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/-ch_4pC0cIE" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Marble Climber Motorized with Battery and Charger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4328106.

One more Cable tie which printed using flexible filament (TPU).
Nothing special but rather convenient.
Choose fix variant by the diameter of the cable you use.

Cable Tie (TPU filament)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3325388.

Top for Xmass tree vase mode

Top for Xmass tree. Vase mode

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4356308.

GoPro Mount Extenders:
1. 125mm
2. 145mm
3. 170mm

GoPro Mount Extender

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3625816.

Small Ugrinsky Vertical Axis Wind Turbine (VAWT) which fits on the top of a pencil.

Good as a physics demonstration, or for just looking nice in front of a desk fan.

If you prefer design with bearings and holder look at https://www.thingiverse.com/thing:3627007

Penciltop Ugrinsky Vertical Axis Wind Turbine VAWT

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3387624.

Pencil Box for 24 pencils

24 Pencil Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4348648.

Yet another Spool Holder using 608 bearings.

It allows you to quickly change the spool due to the large thread and fasten it tight enough.


Spool Holder with Bearing

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4346861.

The original thing [DJI Mavic 2 prop guard dummy battery](https://www.thingiverse.com/thing:3726869) by [postmaster11](https://www.thingiverse.com/postmaster11) has problems with normals. I've only repaired the STL and rotated the model to minimize support (look at the picture attached). 

PropGuard-DummyBattery-cut.stl has cuts on the sides but I did not test them yet (I had to cut them with a knife after print).

Repaired STL for [DJI Mavic 2 battery dummy](https://www.thingiverse.com/thing:3623548) is included too.





DJI Mavic 2 prop guard dummy battery (repaired)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4589461.

Nissan T32 (X-Trail, Rogue) phone holder placed instead of the Shift Lock cover.
Inside size of the Phone Holder itself: 73mm x 12mm.
I used rubber rings to ideally fit my Samsung Galaxy S10.
You need also a pair of M3 bolt with nut (8mm length).
I printed it with PLA but PETG would be better I think.

UPD:
Added improved version - ShiftLockCap3b.STL - to be fixed with a cable tie (Inside size of the Phone Holder itself: 72.6mm x 9.8mm, printed without support)

Nissan T32 (X-Trail, Rogue) phone holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4648364.

Braun Series 5 Accessories Box
Model: 50-W1500S

Use Filament 1.75 as a shafts

Braun Series 5 Accessories Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3449433.

Car Ice Scraper

Car Ice Scraper

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4769208.

Just cat bowl

Cat Bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4360888.

Kit Desing is [here](https://www.thingiverse.com/thing:4371562)

Universal Cap Holder for 4 types of Nikon Photo Lenses.

NiconCapHolder-4r.stl
1. 18-55
2. 50
3. 70-300
4. 11-16

NiconCapHolder-3r.stl
1. 18-55
2. 50
3. 70-300

NiconCapHolder-2r.stl
1. 18-55
2. 50

Nikon Universal Cap Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3355318.

Tripod Plates with GoPro Mount. 3 different type-sizes

Tripod Plate with GoPro Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3354316.

This is a floating handle for GoPro cameras.

GoPro Floaty with mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3301464.

Item is for owners of GoPro 5,6,7 and Zhiyun Z1-Rider 3-Axis Handheld Brushless Gimbal for Gopro 3 3+ 4. The gimbal is originally designed for GoPro 3,4 but with my adapter can be used with new GoPro cams.

Gopro 5,6,7 adapter for gimbal Zhiyun Z1-Rider

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4122569.

Vacuum Cleaner Nozzle will help you f.i. to vacuum clean your computer or another device inside

Suitable for vacuum cleaners with outside hose diameters 32-34.4mm

Vacuum Cleaner Nozzle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3551993.

Sprinkler Cover for lawn watering system

Sprinkler Cover for lawn watering system

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4489961.

An amazing [T Puzzle](https://www.cs.brandeis.edu/~storer/JimPuzzles/ZPAGES/zzzMissingT.html)

Using the same four pieces you can make 100 shapes from the [Hiqu booklet](https://www.cs.brandeis.edu/~storer/JimPuzzles/ZPAGES/zzzHIQU.html)
 
It can be used as an IQ test)

Scale it as you want

Hiqu (T) Puzzle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3309019.

Gopro 5,6,7 adapter for gimbal FeiyuTech G4

Gopro 5,6,7 adapter for gimbal FeiyuTech G4

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3551973.

Safely play football on your lawn with gates made of plastic bottles.

Football gates made of plastic bottles

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3443250.

Simply replaced one of the sides to mirrored one

iMax B6 mini - stand and wall mount (stl mirrored)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

chshkhr