This is a computer case I designed for a server that I put together with some older PC parts. Its size is roughly about 262x202x339mm. I can fit 2 120mm fans one on the front and one at the back. Moth

Total case size: 360 x 360 x 200mm. PLEASE READ THE FULL INSTRUCTIONS BEFORE PRINTING! [Click here to see the full written instructions on Printables. ](https://www.printables.com/model/90040

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5261053. An ATX PSU mount for my modular case system.

This project is designed specifically to be compatible with even 180 x 180 mm printbeds, so you'll be able to make this project even if you have a Original Prusa MINI+, Bambu A1 Mini or anything l

-The minimum required for the ATX tray are models Core and IO to hold the motherboard and pci cards (6 motherboard screws, or with the extensions, 9 motherboard screws). -8 total models snap-fitted an

I wanted a PC that I could travel with but couldn't find anything off the shelf to fit my Micro ATX system that was also easy to carry and could fit under an airline seat. So I made one. I've taken th

Added mounting plate for ATX 2.2 compliant Motherboards.

*The full detailed building instructions are available in the included PDF, or via this link to Printables.

This is an external fan shroud for the Lian Li O11D XL ATX Computer Case, also known as the O11 Dynamic XL or PC-O11D-XL. The Hard Drive bays in this XL case enable HDD hot swap, but they do not feat

This mount fits "Flex ATX" form factor mother boards. It was used to mount a board in an acrylic case. This will require modification for blind mounting (i.e. Drywall).

Extends the top of the Thermaltake Tower 500 PC Case to allow radiators to be installed above the top mounting plate.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6090214. This replaces the acrylic PSU bracket on my cheap open air 2020 test bench case. The acrylic broke while I was c

Check out the build video on YouTube IMPORTANT NOTE: Please read the full description/instruction and watch the YouTube video BEFORE attempting

A cable cover for graphics card power cables and support for graphics card sag. You'll likely have to alter the lengths and dimensions to suit your specific graphics card and case. In the photo I hav

Big enough for 2 complete PCs in one case, absolute monstrosity, built for a school project. I did print it out but I never used it. The PSU caddies and HDD caddies were not finished, it was a group p

These are the motherboard parts for my modular case system. With this, you can mounter your motherboard on this framework. For ITX: You'll need just the ITX part (Part #1) For DTX: You'll need the IT

The Ocktron MD is a 3D printable medium sized home lab rack, perfect for projects up to 7U height(12.25 inches). Engineered with our new Frame 2.0 with easy paint design, less screws, e

The Ocktron SM is a 3D printable small sized home lab rack, perfect for projects up to 6U height(10.5 inches). Engineered with our new Frame 2.0 with easy paint design, less screws, erg

The Ocktron Foundation for kickstarting any 2026 home lab project. Four racks engineered with our new Frame 2.0 featuring easy paint design, less assembly screws, ergonomic handlebars, art-

The Ocktron ST is a 3D printable standard sized home lab rack, perfect for projects up to 8U height(14 inches). Engineered with our new Frame 2.0 with easy paint design, less screws, er

The Ocktron LG is a 3D printable large sized home lab rack, perfect for projects up to 9U height(15.75 inches). Engineered with our new Frame 2.0 with easy paint design, less screws, er

Overview Replacement HDD Cages for the Rosewill RSV-Z2600U 2U Server Case. The non-extended should take up roughly the same footprint as the regular cages, and the Extended will allow for HDD's tha

This small stack allows you to test "Ironing Stack Printing" with your printer. Stack Prints are parts that are printed on top of each other. [Click here to watch a video tutorial](https://www.yo

Create your own battle droid army and take over the galaxy! Scale 1:9 (90% for 1:10) May the force be with you! Roger roger! [If you are interested in more Starwars kitcards then take a look at

Collapsing Master Sword This Master Sword prints-n-place as just the hilt but extends in to a full sword. Its 250mm tall when printing but extends to 870mm long! The sword is designed to be printe

This is a test print for the collapsing swords and Light Sabers. If you can print thing without the rings sticking together then you should be able to successfully print the full sword. The test pr

Spooky Controller Stand – Free Download Get ready to embrace the haunted season with the Spooky Controller Stand, a fun and easy-to-print model perfect for gamers who want to get into the #

Now with hard cases added! This is a unique card cradle that automatically aligns the cards once they are dropped on the CardDock. The CardDock is also a card case so you have somewhere to keep your

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Collapsing Master Sword with Removable Blade Unlike the Print-N-Place version, the pommel on the hilt of this Master Sword is threaded which allows the blade to be printed separately and inserted

This stack creates a 3x3 Board that is 600x600 mm or 23.6x23.6 inches. The stack is made of 4 Core Tiles, 4 Side Tiles, and 1 Corner Tile. Each Tile is an 8x8 (approximately 200x200 mm). The Tile la

The FAN ART Model Great Paint Off After a ton of planning and coordination, we are ready to launch our first FAN ART model painting competition! (Yay!) **But first, we would like to give a s

A vase with twisting pilars that merge together. Looks especially neat with dual color silk filaments. 160mm tall 2 versions are included, a filled version for spiral/vase mode printing, and a versi

It holds 22 "ciggs" and has a sliding top that's locks in with a click. Can be used as an alternative storage box as well. I recommend printing with stronger materials. I used Carbon Fiber PC, but yo

I invite you to join my Telegram group (Entries are limited - don't miss this opportunity): https://t.me/+cu1hYjl2iT9iZjI0

**A modular and stackable box and drawer divider system for all use cases. ** With 10 000 + sizes this design is highly customizable. The parts are super quick to print and easy to assemble. The conn

An elegant, robust and reusable notebook with a pen compartment. Once you run out of blank pages you can just switch the paper out and keep the used ones stored with another rubber band. Single

Model This is a holder for your keys (or anything else that you might misplace) featuring a double action mechanism for locking and unlocking the key ring in place as well as ejecting it. It’s 100

Collapsing Katana with Single Edged Curved Removable Blade I updated the latest version of the Katana to have a single edged curved removable blade. You can

CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Fin

Instructions [Hardware](https://prinnit.com/ForgeCore/design/3684PNO8mkSijmWJ7KxQtMcRLVA?sec

Instructions [Hardware](https://prinnit.com/ForgeCore/design/36A7gFfFIgy6kktuJr4Vku4YFMV?sec

This is the Uno cards version of CardDock. It is a unique card cradle that automatically aligns the cards once they are dropped on the CardDock. The CardDock is also a card case so you have somewher

The Multiboard Tiles form the base of Multiboard, allowing you to screw in Threads, insert Snaps and use the Pegboard holes. The Tiles have two types of holes: Multiholes and Pegboard Holes. The Mu

Ever wished you could pack your gridfinitised workshop for some on-the-go action? Well this is a solution. I wouldn't call it the solution; its grossly overcomplicated, requires post processing, and h

Collapsing Katana with Removable Blade This collapsing Kantana is similar to the original version in appearance but its modified so

This bolt has a “small thread” that can screw into the pegboard holes, or into any bolt/rod that has a small thread hole. The 13mm thread length enables you to securely join two Multiboard tiles tog

✨ VERSION 2 IS NOW AVAILABLE ✨ SKEWBITS is an original puzzle game designed specifically for 3D printing. Fit the four unique Skewbits in

Instructions [Hardware](https://prinnit.com/ForgeCore/design/369pI6rfH8HBQoykmXDoIwHDLwi?sec

Wearable Iron Man Mark 85 Helmet The jaw is removable and there are cutouts where you can put magnets in both the jaw and the helmet for a better fit. New updated model. Some had problem printing so