This project is designed specifically to be compatible with even 180 x 180 mm printbeds, so you'll be able to make this project even if you have a Original Prusa MINI+, Bambu A1 Mini or anything larger.

The full written building instructions with pictures can be found on Printables by clicking here.

Case dimensions: The overall case size including the feet is: 430 x 430 x 200mm.

Estimated filament usage: Based on the exact setup shown you'll need about:

• 2.5 to 3.0 kg of black PETG or similar filament.
• 1.5 to 2.0 kg of grey PETG/PLA or similar filament. Combined total filament: approx. 4.5 to 5.0 kg.

Parts compatibility:

• ATX, mATX and ITX motherboards.
• Up to 12x 3.5" Hard drives.
• ATX or SFX / SFX-L power supplies (all depths)
• 4x 120mm computer fans, 15 to 25mm thick.
• Graphics cards or other PCIe cards up to 245 millimeters long.
• CPU Air Coolers up to 160mm. ** Practical case features:**
• Actively cooled drive bays. (Air intake passing through drive bays)
• Self-latching drive mounts for quick and easy drive swaps.
• Easy access to all PCIe slots except the very bottom one. (Update may come)
• Front-to-back airflow passing the CPU cooler.
• Magnetic removable side panel for easy access. ** About the design:**
• Easy to build with almost all parts numbered for easy part management.
• Sturdy design with interlocking parts combining sliding joints and screws for maximum stiffness.
• All parts print with zero support material.