Vase with an organic shape. 150mm tall. Scale to your desired size in slicer.

Decorative Organic Vase

Decorative Organic Vase.stl

*** Work In Progress ***

"Inspired" by the Revopoint MIRACO, use your Revopoint Inspire 3D scanner handheld. Allows you to attach your Revopoint Inspire 3D scanner and phone into a single handheld housing to use it handheld. The scanner mounts using it's built-in tripod screw hole. Your phone will clamp in using the screw clamp provided. Includes an optional lens cover. I designed it to hold my Galaxy S23 Ultra with a case, so it should hold even the largest phones. I've also tested it with an iPhone 13 with a slim case, so it'll hold smaller phones as well.

All the parts should print without supports. I have exported the STL's with the proper orientation, so all you should need to do is drop them in the slicer.

**Parts list:**

- Inspire Holder.stl - Mount your Inspire to this using a ¼-20 x 5/16" screw

- Grips.stl - Attach the holder to this with 2x M4 screws after you've mounted the Inspire to the holder

- Phone Clamp.stl - The clamp that slides into the bottom of the grip housing

- Phone Clamp Screw.stl - The screw which screws into the grip housing to tighten the clamp

- Top Cover.stl - Mostly just a decorative cover that goes on the top of the holder - just drop some adhesive in the grooves of the holder and drop it down in place. If printing with PLA, cyanoacrylate (CA glue, or “super glue”) works great.

- Cable Clip.stl - Snaps into the cable channel to help secure your USB cable. There are designated spots where these fit.

- Lens Cover.stl - A cover for the lens to protect it while in storage. It should friction fit to the front in the grooves. (i might need to tweak the tolerances on this, let me know).

**Things you will need:**

- 1x 1/4"-20 x 5/16" button head screw - for attaching the scanner to the holder

- 2x M4 screws, 10 - 20mm in length - for attaching the grips and the holder together

- Short USB-C cable - I used this one from Amazon here (AGOZ 6inch Right Angle USB C to USB C Cable)

- Your phone (obviously)

Revopoint Inspire Handheld Holder

Grips.stl

A tall vase with a sweeping wave pattern. Filled version included for spiral/vase mode printing

Tall Wavy Vase

Tall Wavy Vase.stl

Tall vase with an organic swirl like pattern. Around 150mm tall. Included is a filled version for spiral/vase mode printing - if using a 0.4mm nozzle, try 0.6mm line width for spiral/vase mode.

Organic Swirl Vase

Organic Swirl Vase.stl

Vase with an organic pattern. I included a separate version specifically for use with spiral vase mode in your slicer.

Organic Vase

Organic Vase.stl

A vase with a voronoi pattern. 150mm in height. Scale to your desired size in slicer.

Voronoi Vase

A cylindrical vase with a voronoi pattern. 150mm tall, scale in your slicer to desired size.

Voronoi Cylinder Vase

This is a spring loaded phone holder designed specifically for use with the Revopoint Inspire tripod. It slides together and the jaws are held closed with a spring. Fits both my iPhone 13 with thin case and Galaxy S23 Ultra with a case. Simply pinch the spring holders from the back to open the jaws and insert your phone.

Included are 2 versions, one designed for heat set inserts, and one with modeled threads (they are intentionally designed to thread in a little tight). There is a small hole in the bottom jaw made for a M2.5 screw. Just install the screw after assembly and it will prevent the jaws from coming fully apart.

The heat set inserts I used: https://www.amazon.com/dp/B08PVQX853?psc=1&ref=ppx_yo2ov_dt_b_product_details

For the top jaw, I use a ¼"-20 grub screw: https://www.amazon.com/dp/B07SK6HVGF?ref=ppx_yo2ov_dt_b_product_details&th=1

The spring I used measures 42mm in length, 9.6mm in diameter, from this spring pack: https://www.amazon.com/gp/product/B00VDRF25C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Revopoint Tripod Phone Holder

Top Jaw - Heat Inserts.stl

A pen/pencil holder. Around 94mm tall. Scale to your desired size.

Pen/Pencil Holder

This is a protective front cover for the Revopoint Inspire 3D scanner. If your printer's extrusion flow is calibrated, it should friction fit pretty nicely. 

Revopoint Inspire Front Cover

Revopoint Inspire Cover - Looser.stl

The purpose of this adapter is to allow the mounting of Reolink's Video Doorbell using the existing screw holes of standard doorbell buttons that have a screw spacing of around 50-56mm. This is useful if you don't want to have to make more holes in your wall.

This will accommodate both the angle bracket, and the metal mounting plate.

*note: pictures of the printed part is of an older version

Reolink Video Doorbell Adapter Plate

We had about 50 Axis M3045-V dome cameras to install at work, and rather than pay the ridiculous price of ~$100/ea for this type of mount made by Axis, I designed this one instead.

This mount was specifically made to fit the M3045-V, but I know it will fit other Axis dome cameras of the same size, particularly the M3005-V, and possibly the newer models like M3065, M3085, etc. Axis doesn't seem to provide any type of dimensioned technical drawing, so I can't confirm. The distance between the 2 mounting holes is 79mm.

I printed these in PETG and they have been happily in use for the past 3 years. Really saved us from having to drill a ton of holes in the tiles for mounting.

Material: PETG, ABS, etc
Layer height: 0.2mm worked fine for me
Hardware: 6x 3 mm heat-set inserts (5 mm outer diameter)

Other notes: Make sure to print the hooks standing up on their sides for best strength

Axis M3045-V Mount for Grid Tile T-Bar

Axis M3045-v grid tile mount base.stl

Cylindrical container with a twist cap.

Large and Small version available.

Twist Cap Container

Container - Large.stl

Similar to my other “Wavy Vase” but with a lattice style

Wavy Lattice Vase

Abstract Pattern Vase

Lattice Vase

Triangle Lattice Vase

Vase with vertical waves

Included is a filled version for printing in vase mode and a regular version with the inner cavity modeled for regular printing.

Vertical Waves Vase

Vertical Waves Vase.stl

Case for the iPhone 13. It has grips on the side to help prevent drops.

Fits the regular iPhone 13 only.

Designed for PLA/non-flexibles.

iPhone 13 Case

Vase with a swirl pattern.

Overhangs don't allow printing this in vase mode, so I did not include a filled version.

Swirl Pattern Vase

Swirl Pattern Vase.stl

Vase with a wavy pattern.

Included is a filled version for printing in vase mode and a regular version with the inner cavity modeled for regular printing.

Wavy Vase

Wavy Vase.stl

Basic vase with a stone type pattern.

Included is a filled version for printing in vase mode and a regular version with the inner cavity modeled for regular printing.

For printing in vase mode, you'll probably need a lower layer height (0.1-0.15mm) to accommodate some of the small overhangs near the bottom.

Pattern Vase

Pattern Vase.stl

Spiral Vase

Geometric Vase 3 vasemode.stl

Really wasn't sure what to call this thing, but was learning some new techniques in Fusion 360 and this is the result.

2 versions included, one with the cavity modeled and one filled for use with vase mode. I have not actually printed it, but it should print fine.

Geometric Finned Vase

Geometric Finned Vase.stl

Container - Small.stl

Cap - Large.stl

Cap - Small.stl

Organic Vase (spiral vase mode).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jwalker55

Pinned models

Swirl Pattern Vase

Twist Cap Container

Organic Vase

Decorative Organic Vase

Revopoint Inspire Handheld Holder

Tall Wavy Vase

Organic Swirl Vase

Organic Vase

Voronoi Vase

Voronoi Cylinder Vase

Revopoint Tripod Phone Holder

Pen/Pencil Holder

Revopoint Inspire Front Cover

Reolink Video Doorbell Adapter Plate

Axis M3045-V Mount for Grid Tile T-Bar

Twist Cap Container

Wavy Lattice Vase

Abstract Pattern Vase

Lattice Vase

Triangle Lattice Vase

Vertical Waves Vase

iPhone 13 Case

Swirl Pattern Vase

Wavy Vase

Pattern Vase

Spiral Vase

Geometric Finned Vase