Total case size: 360 x 360 x 200mm.

PLEASE READ THE FULL INSTRUCTIONS BEFORE PRINTING! Click here to see the full written instructions on Printables.

This case supports the following PC components:

• Normal ATX, mATX and ITX motherboards
• ATX PSU up to 140mm depth or SFX PSU.
• Graphics cards up to 335 millimeters. (Max 3-slot/61mm thick if using ATX PSU)
• Top mounted 120/240mm radiator or 2x 120mm exhaust fans.
• Front mounted 120/240/280mm radiator or 2x 120/140mm intake fans.
• Bottom mounted up to 2x 120/140mm intake fans.
• Up to 4x 3.5" Hard Drives or 6x 2.5" drives (At the cost of GPU length)
• CPU Air cooler up to 155mm tall

Parts required to build this case:

• M3 Threaded inserts (OD 4.6mm, length 5 or 6 mm)
• M3 x 10mm screws
• 8 x 3 mm Neodymium magnets
• 12 mm Power Button
• Glue for the magnets and butterfly joints (Use only a tiny amount of glue per part, avoid filling the holes too much)