DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Gazzaladra
Gazzaladra18K followers
Follow
Gazzaladra
Gazzaladra
|
Image 1 of 11
Paper towel holder 3d model
Gazzaladra
Gazzaladra
|
Image 1 of 11
Paper towel holder 3d model
Paper towel holder video thumbnail
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model
Paper towel holder 3d model

Paper towel holder

1.8K downloads · 7 months ago · **A paper towel holder with a great tear-off experience.** It is fully enclosed, so your towels don’ · View this model's project page to learn more
Subscribe for access starting at $12 USD
Get access to this model and 139+ more
This model is restricted by licensing terms. 
View license.
Description

A paper towel holder with a great tear-off experience. It is fully enclosed, so your towels don’t get wet and stay hygienic.

Sizes All sizes have an additional 12 mm clearance to the sides, so slightly bigger or deformed rolls work, too. The sizes are described in the maximum Roll diameter x roll height in mm

  • EU: 110 x 260
  • EU Big: 150 x 260
  • US: 140 x 280
  • US Big: 150 x 280
  • US Costco: 150 x 290
  • AUS: 130 x 210
  • AUS Big: 150 x 210

The center of these rolls usually has a diameter of 40 mm. The center bottom fits rolls from 38 – 43 mm in diameter. For bigger rolls there is an adapter sleeve included that lets you use rolls up to 48 mm in inner diameter. It works with all three sizes described above.

Instructions

  • Choose your version
  • Print all parts
  • Optional: Print the TPU feet and glue them into the bottom, you can also use store bought rubber feet with a diameter of up to 8 mm.
  • Push your roll onto the center bottom
  • Insert it into the bottom while already guiding the first paper towel through the slit
  • Add the top to the center top and connect them with the screw
  • Place the top assembly onto the bottom assembly while guiding the paper towel through the slit.

Usage

  • Place one hand on top so you can use or block the rotation.
  • Unroll the Paper towels until the perforation slightly sticks out.
  • Block the rotation and tear off the paper at an angle.
  • You can retract or push out the paper with the knob on top
  • If your roll gets stuck, you can use the center notch to grab it.
  • If it is stuck even further inside, you can lift the top half of the assembly to fix the paper towels in place.

Print settings Required build volume A: 150 x 150 x 170 mm Required build volume B: 190 x 190 x 180 mm

Material usage A: 460 g Material usage B: 600 g

Material: PLA Print direction: files are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none

Tags:

Community Makes (8)
Product easily falls apart. Just a suggestion, make the top back part of the outer shell into a clasp and change the center post to lock-in both halves; this will make it more solid. Also, make the feet screw-in so that it becomes a tool-less product.
Make by user
Not only is this a super useful and well thought out product, I really like the design. The lines are smooth, the ability to have dual-color really makes it really pop. Thank you!
I ran into a problem with your model when I printed the 150mm W 260mm H it doesent fit american rolls in height. The 280mm model works in heighth but not in width. If it is possible to make a model that is 250mm by 280mm thet would fit american jumbo rolls.
Need a version for 285mm rolls from American Costco!
Thanks for the C version of the holder with the adapter. Now the paper fits perfectly. // To prevent the towel from twisting when pulling at an unoptimal angle, I wrapped the adapter with a single layer of masking tape.
Printed this on new Bamboo lab P2S printer and the build looks good, but there are a few things that needs improvement. Right now, the model cannot be lifted without the top and bottom parts separating. I wish there was a way to hold these parts together. I'm new to 3D printing and have 0 skills to modify it. But got some ideas how we can do it.
Looks good, but has some design flaws: - Parts do not lock, so it's impossible to carry. - If your roll does not have the exact measures this was designed to hold, good luck getting a single sheet. You'll have to fiddle your way into the top to hold the roll. If the license allows, I would probably modify this to include a click system between the two halves and a compliant clutch so you can lock the roll when applying pressure to cut a sheet.
Product easily falls apart. Just a suggestion, make the top back part of the outer shell into a clasp and change the center post to lock-in both halves; this will make it more solid. Also, make the feet screw-in so that it becomes a tool-less product.
Make by user
Not only is this a super useful and well thought out product, I really like the design. The lines are smooth, the ability to have dual-color really makes it really pop. Thank you!
I ran into a problem with your model when I printed the 150mm W 260mm H it doesent fit american rolls in height. The 280mm model works in heighth but not in width. If it is possible to make a model that is 250mm by 280mm thet would fit american jumbo rolls.
Need a version for 285mm rolls from American Costco!
Thanks for the C version of the holder with the adapter. Now the paper fits perfectly. // To prevent the towel from twisting when pulling at an unoptimal angle, I wrapped the adapter with a single layer of masking tape.
Printed this on new Bamboo lab P2S printer and the build looks good, but there are a few things that needs improvement. Right now, the model cannot be lifted without the top and bottom parts separating. I wish there was a way to hold these parts together. I'm new to 3D printing and have 0 skills to modify it. But got some ideas how we can do it.
Looks good, but has some design flaws: - Parts do not lock, so it's impossible to carry. - If your roll does not have the exact measures this was designed to hold, good luck getting a single sheet. You'll have to fiddle your way into the top to hold the roll. If the license allows, I would probably modify this to include a click system between the two halves and a compliant clutch so you can lock the roll when applying pressure to cut a sheet.
Community Makes (8)
Product easily falls apart. Just a suggestion, make the top back part of the outer shell into a clasp and change the center post to lock-in both halves; this will make it more solid. Also, make the feet screw-in so that it becomes a tool-less product.
Make by user
Not only is this a super useful and well thought out product, I really like the design. The lines are smooth, the ability to have dual-color really makes it really pop. Thank you!
I ran into a problem with your model when I printed the 150mm W 260mm H it doesent fit american rolls in height. The 280mm model works in heighth but not in width. If it is possible to make a model that is 250mm by 280mm thet would fit american jumbo rolls.
Need a version for 285mm rolls from American Costco!
Thanks for the C version of the holder with the adapter. Now the paper fits perfectly. // To prevent the towel from twisting when pulling at an unoptimal angle, I wrapped the adapter with a single layer of masking tape.
Printed this on new Bamboo lab P2S printer and the build looks good, but there are a few things that needs improvement. Right now, the model cannot be lifted without the top and bottom parts separating. I wish there was a way to hold these parts together. I'm new to 3D printing and have 0 skills to modify it. But got some ideas how we can do it.
Looks good, but has some design flaws: - Parts do not lock, so it's impossible to carry. - If your roll does not have the exact measures this was designed to hold, good luck getting a single sheet. You'll have to fiddle your way into the top to hold the roll. If the license allows, I would probably modify this to include a click system between the two halves and a compliant clutch so you can lock the roll when applying pressure to cut a sheet.
Product easily falls apart. Just a suggestion, make the top back part of the outer shell into a clasp and change the center post to lock-in both halves; this will make it more solid. Also, make the feet screw-in so that it becomes a tool-less product.
Make by user
Not only is this a super useful and well thought out product, I really like the design. The lines are smooth, the ability to have dual-color really makes it really pop. Thank you!
I ran into a problem with your model when I printed the 150mm W 260mm H it doesent fit american rolls in height. The 280mm model works in heighth but not in width. If it is possible to make a model that is 250mm by 280mm thet would fit american jumbo rolls.
Need a version for 285mm rolls from American Costco!
Thanks for the C version of the holder with the adapter. Now the paper fits perfectly. // To prevent the towel from twisting when pulling at an unoptimal angle, I wrapped the adapter with a single layer of masking tape.
Printed this on new Bamboo lab P2S printer and the build looks good, but there are a few things that needs improvement. Right now, the model cannot be lifted without the top and bottom parts separating. I wish there was a way to hold these parts together. I'm new to 3D printing and have 0 skills to modify it. But got some ideas how we can do it.
Looks good, but has some design flaws: - Parts do not lock, so it's impossible to carry. - If your roll does not have the exact measures this was designed to hold, good luck getting a single sheet. You'll have to fiddle your way into the top to hold the roll. If the license allows, I would probably modify this to include a click system between the two halves and a compliant clutch so you can lock the roll when applying pressure to cut a sheet.
Discussions
B
balsas_chewy.3y5 months ago
Not only is this a super useful and well thought out product, I really like the design. The lines are smooth, the ability to have dual-color really makes it really pop. Thank you!
Not only is this a super useful and well thought out product, I really like the design. The lines are smooth, the ability to have dual-color really makes it really pop. Thank you! 3d model
PrinterBambu Lab P1S
MaterialPLA
Gazzaladra
Gazzaladra5 months ago

Awesome! Thank you!!!!

K
karthikshenoi6 months ago
Printed this on new Bamboo lab P2S printer and the build looks good, but there are a few things that needs improvement. Right now, the model cannot be lifted without the top and bottom parts separating. I wish there was a way to hold these parts together. I'm new to 3D printing and have 0 skills to modify it. But got some ideas how we can do it.
Printed this on new Bamboo lab P2S printer and the build looks good, but there are a few things that needs improvement. Right now, the model cannot be lifted without the top and bottom parts separating. I wish there was a way to hold these parts together. I'm new to 3D printing and have 0 skills to modify it. But got some ideas how we can do it. 3d model
PrinterBambu Lab P1S
MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsNone
Gazzaladra
Gazzaladra6 months ago

Thanks for the feedback! Yes the design is currently not intended for carrying around since I prioritized a quick take off for easier tangle fixing! I wrote that down though and will see if I can get both things done!

E
elektrikkameleon4 months ago

Agreed! I like to grab and move my paper towel holder sometimes, especially if I want to bring it to where I'm cleaning up, or move it out of the way while cleaning countertops.

B M
mbv066 months ago
Thanks for the C version of the holder with the adapter. Now the paper fits perfectly. // To prevent the towel from twisting when pulling at an unoptimal angle, I wrapped the adapter with a single layer of masking tape.
Thanks for the C version of the holder with the adapter. Now the paper fits perfectly. // To prevent the towel from twisting when pulling at an unoptimal angle, I wrapped the adapter with a single layer of masking tape. 3d model
PrinterBambu Lab P1S
MaterialPETG
Layer height0.2 mm
Infill density15 %
SupportsNone
O
okenobi6 months ago
Looks good, but has some design flaws: - Parts do not lock, so it's impossible to carry. - If your roll does not have the exact measures this was designed to hold, good luck getting a single sheet. You'll have to fiddle your way into the top to hold the roll. If the license allows, I would probably modify this to include a click system between the two halves and a compliant clutch so you can lock the roll when applying pressure to cut a sheet.
Looks good, but has some design flaws: - Parts do not lock, so it's impossible to carry. - If your roll does not have the exact measures this was designed to hold, good luck getting a single sheet. You'll have to fiddle your way into the top to hold the roll. If the license allows, I would probably modify this to include a click system between the two halves and a compliant clutch so you can lock the roll when applying pressure to cut a sheet. 3d model
PrinterPrusa MK3/S/S+
MaterialPLA+
Layer height0.2 mm
Infill density15 %
SupportsNone
Gazzaladra
Gazzaladra6 months ago

Hi there thanks for the feedback! What the diameter of the inside of your rolls? So I can add another thickness to the lower inner part! Also I will write down the idea to lock the parts together, although I prefer it to open quickly so you can fix a tangle, maybe there is a way to get both!

D
DreamingSheep6 months ago

Agree, some form of locking/engaging feature would be great. I want to mount mine horizontally and feel it likely won't work at the moment (about to start printing, so not sure yet).

Gazzaladra
Gazzaladra6 months ago

I just updated the files to have a adapter for bigger inner diameters!

kent b
belnapkent6 months ago
I ran into a problem with your model when I printed the 150mm W 260mm H it doesent fit american rolls in height. The 280mm model works in heighth but not in width. If it is possible to make a model that is 250mm by 280mm thet would fit american jumbo rolls.
I ran into a problem with your model when I printed the 150mm W 260mm H it doesent fit american rolls in height. The 280mm model works in heighth but not in width. If it is possible to make a model that is 250mm by 280mm thet would fit american jumbo rolls. 3d model
3d model
Gazzaladra
Gazzaladra6 months ago

You mean 280 height and 150 width? I am making a few more sizes this week and this one is one the list!

kent b
belnapkent6 months ago

thank you

Gazzaladra
Gazzaladra6 months ago

Done is now included!

K
Kelowna6 months ago
Need a version for 285mm rolls from American Costco!
Need a version for 285mm rolls from American Costco! 3d model
PrinterBambu Lab P1S
Gazzaladra
Gazzaladra6 months ago

Done is now included!

N
NAKHUMPOOTA4 months ago
Product easily falls apart. Just a suggestion, make the top back part of the outer shell into a clasp and change the center post to lock-in both halves; this will make it more solid. Also, make the feet screw-in so that it becomes a tool-less product.
Product easily falls apart. Just a suggestion, make the top back part of the outer shell into a clasp and change the center post to lock-in both halves; this will make it more solid. Also, make the feet screw-in so that it becomes a tool-less product. 3d model
PrinterBambu Lab A1
MaterialPETG
Layer height0.4 mm
Ranjith K
ranjithcn264 months ago
3d model
PrinterBambu Lab P1P
MaterialPLA
Ranjith K
ranjithcn264 months ago

I printed the US Costco: 150 × 290 version and tested it with Bounty paper towel rolls from Costco. The fit seems a bit loose, as the roll is slightly taller than the printed holder (see photo). Just wanted to share this in case it’s helpful for sizing adjustments.

P
p46dgk6nt52 months ago

Please add for dimension: 150m diameter x 180mm height, with inner diameter 60mm. Thank you.

Kevin M
kevinmoulart3 months ago

Can you make a 110x210 version ? In Belgium my paper towel roll are those dimensions :)

View all 24 discussions

Paper towel holder

1.8K downloads · 7 months ago in 
Kitchen & Dining
 and 
Home & Garden
Gazzaladra
Gazzaladra18K followers
Follow
Subscribe for access starting at $12 USD
Get access to this model and 139+ more
This model is restricted by licensing terms. 
View license.

Projects

Changelog

V1 20.11.2025 V 1.1 07.12.2025 - new bigger size added - top window is now smaller for less water dripping inside - adapter sleeve added for bigger inner diameters V1.2 18.12.2025 - 3 new sizes added V1.3 12.01.2025 - AUS Big size added

View post
00

More models

Gazzaladra
Gazzaladra
Infinite Notebook 3d model

Infinite Notebook

Gazzaladra
Gazzaladra
Clock(lamp) 3d model

Clock(lamp)

Gazzaladra
Gazzaladra
Frank the frog pen holder 3d model

Frank the frog pen holder

Gazzaladra
Gazzaladra
Multifunctional Planter “BRBP” 3d model

Multifunctional Planter “BRBP”

Gazzaladra
Gazzaladra
Sponge holder 3d model

Sponge holder

Gazzaladra
Gazzaladra
Tea bag dispenser 3d model

Tea bag dispenser

Gazzaladra
Gazzaladra
Marshmallow table 3d model

Marshmallow table

Gazzaladra
Gazzaladra
Raily – modular wall organization 3d model

Raily – modular wall organization

Gazzaladra
Gazzaladra
Mushroom lamp “Amanita Muscaria” 3d model

Mushroom lamp “Amanita Muscaria”

Gazzaladra
Gazzaladra
Glasses case 3d model

Glasses case

Gazzaladra
Gazzaladra
Laundry detergent dispenser 3d model

Laundry detergent dispenser

Gazzaladra
Gazzaladra
Mushroom coat hook / hanger 3d model

Mushroom coat hook / hanger

Gazzaladra
Gazzaladra
Cannon spotlight lamp 3d model

Cannon spotlight lamp

Gazzaladra
Gazzaladra
Planter “Extra” 3d model

Planter “Extra”

Gazzaladra
Gazzaladra
Bird feeder | suet ball holder 3d model

Bird feeder | suet ball holder

Gazzaladra
Gazzaladra
Cheese shelf bracket 3d model

Cheese shelf bracket

Gazzaladra
Gazzaladra
BOXY Planters 3d model

BOXY Planters

Gazzaladra
Gazzaladra
Organic waste bin 3d model

Organic waste bin

Gazzaladra
Gazzaladra
Mushroom shelf “Formitopsis Pinicula” II 3d model

Mushroom shelf “Formitopsis Pinicula” II

Gazzaladra
Gazzaladra
Spaghetti bowl and meatball salt and pepper shaker 3d model

Spaghetti bowl and meatball salt and pepper shaker

AboutBlog
Apps
Download ThangsThangs SyncBlender AddoniOSAndroid
Help
HelpFAQSupport
Legal
LegalTerms & ConditionsPrivacy PolicyContent Policy
Feedback