A mushroom coat hanger with a hinged cap. A pretty way to store your clothes.

There are two versions included, one for wall mount tape and the other for screws and dowels. The screw holes have a diameter of 5.5 mm.

Instructions

• Print your version
• Glue the lamella to the cap
• Glue the stem to the base
• Insert the cap into the base and insert a piece of filament as hinge from the side
• Mount the assembly
• Screw version: Add the screw caps (The side with the small bevel towards the screws) and insert a piece of filament from the side to keep them in place.
• Glue version: Add wall mount tape to the back and press the assembly in the desired place. -Enjoy!

Print settings Required build volume: 120 x 120 x 120 mm Material usage: 80 g per full mushroom

Material: PLA Print direction: files are rotated correctly Support: Only the overhang of the Stem. Preferably type tree and a threshold angle of 30 (default). You can add a support blocker to the inside cut out that can be bridged. All other parts require no support. Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 15% Build plate adhesion type: none