Regamaster evo 2

regamaster evo 2.stl

This is designed to work with the 30mm SMD cut tape reels from here: https://www.thingiverse.com/thing:4735881

Gridfinity SMD Cut Tape Holder for SMD parts

Gridfinity SMD Cut Tape Holder 1x6x0.5.stl

Discover the exquisite 3D Christmas Candle Holder designed by Skipper07 on thangs.com. This expertly designed 3D model falls under the 'Home/Other' category. The holder features intricate detailing, making it a stunning addition to any home decor, especially during the festive season. Check out the beautiful model images provided to get a detailed view of the Christmas Candle Holder. With its unique design, this 3D model complements any holiday ambiance perfectly. Explore more about this 3D Christmas Candle Holder on thangs.com. The originality and superior design proficiency evident in this model make it an excellent choice for those looking for a distinct holiday decoration. Visit thangs.com now to get a closer look at this Christmas Candle Holder.

Christmas Candle Holder

Christmas Candle Holder.stl

Here is Crystal MagSafe charger horizontal, Building on the original MagSafe design this design is a slim down version designed for the new Horizontal display feature as far as I can tell this is only for the SE version so some larger phone may tip this model over. This amazing crystal will power up your phone in no time, No supports needed, Print in Place. Simply print the model, then line the hole with a small amount of blue tac then insert your MagSafe charger or similar charger, then use the cable channel to run the cable behind the crystal, and place a small amount of blue tac underneath the crystal to hold the cable in place, I used PLA and found the Blue Tac surprisingly strong, if you have troubles getting the blue tac to stick I recommend double sided tape. Print settings, Nozzle size 0.4mm, Layer height 0.2mm, No supports, Print speed 60ms, infill pattern Grid, Infill density 15%

Crystal MagSafe charger horizontal

Crystal magsafe charger horizontal.stl

NHL FANS PLEASE ENJOY THESE PRINTABLE ACTUAL SIZE HOCKEY PUCKS. CUSTOMIZED FOR ALL NHL FRANCHISES COMING SOON.

Nordiques hockey puck

Nordiques.stl

Montreal Canadiens hockey puck.

Montreal Canadiens.stl

Avalanche Hockey puck

Avalanche.stl

Discover the 3D model of a high-grade and immersive remote control Black Hawk helicopter blade at thangs.com. This intricate and lifelike model replicates the real-life Black Hawk helicopter blade, suitable for remote control aviation enthusiasts or anyone looking to replace broken propellers. Our design was crafted from a genuine blade with immense attention to detail, ensuring a perfect fit and enhanced performance for your RC Black Hawk. Rendered accurately and available for preview at the mentioned URL, this model stands out for its precision and authenticity. Explore the world of miniature aviation with our 3D model of remote control Black Hawk helicopter blades at thangs.com today.

remote black hawk propeller blades.stl

Explore the innovative Sideways Phone Amplifier Stand on Thangs.com. This 3D model, classified under "Hobbies/Music", showcases a simple yet impressive design that effectively amplifies your phone's sound while providing a sturdy stand. With three speaker cover choices, you can customize the stand to meet your individual style and preference. The specifics of this 3D model reveal a meticulous design process by DFD.3D. Enjoy the clear, accurate renderings of the Phone Amplifier Stand's Main Body and Speakers from multiple angles. These provide a comprehensive view of the piece and reveal its practical functionality and aesthetic appeal. This creatively engineered model, which commendably merges tech gadgetry and music hobbies, is definitely a unique find on Thangs.com. Expand your 3D model collection with this distinctive phone amplifier stand design.

Sideways Phone Amplifier Stand

Speaker-R-V1.stl

Enhance your music listening hobby with a 3D Thumbs Up Phone Amplifier Stand available on Thangs.com. Crafted under our music category by our distinguished designer DFD, this 3D model amplifies your phone's sound through its uniquely designed feet. Its series of images showcases its detailed modeling and smooth finish. The Thumbs Up Phone Amplifier Stand is an ideal accessory for music lovers seeking practicality without compromising style. It serves functionalities such as enhancing sound as well as adding aesthetic value to your phone's setup. This unique sound amplifier stand design is sure to elevate your listening experience.

Thumbs Up Phone Amplifier Stand

6in-Arms-V1.stl

This 3D model imitates a vintage arcade cabinet door. Perfect for those who enjoy arcade-era nostalgia, this design doubles as a retro-style piggy bank.

The distinct "glowing" red lettering is achieved through an easy 2-color print, segmented at a 5.20mm layer height.

The cabinet door has a print-in-place hinge. The lock is printed separately in 2 connecting pieces.

The "25¢ | Insert Coin To Save" coin slots accommodate any US coin, not just quarters.

Experience a nostalgic trip back to the arcade age while saving for your next gaming spree.

Arcade Cabinet Door with Lock and Coin Slots

CoinDoorAllv20.3mf

holds 5 AAA batteries and 4 AA batteries, used to hold extra batteries in backpack or car.

battery storage.stl

wrestling mold.stl

Spanish football club.

Easy to print “Sporting de Gijón” letters for wall decoration.

Printing settings:

Nozzle diameter: 0.4 mm

Layer height: 0.25 mm

Perimeters: 3

Top and bottom solid layers: 4

***********************************************************************

All Quimicafeina designs are protected by Copyright Law. By downloading, you have no right to sell or distribute any digital files or reproductions from those files.

To get access to exclusive designs or for a commercial license to sell the physical prints of the files, you can subscribe to our clubs (printables, thangs or patreon).

Sporting de Gijón 2D wallart

sporting_de.stl

It is a spacer ring to mount of a laser pointer in place of a telescope's finderscope. It is intended for the Bresser AR-152L, but it is very likely that it will fit other models and brands.

laser pointer spacer ring

laser_overlay.stl

**Note:** This piece should be easily redimensionable. The first link in the description leads to the Onshape original model, where it can be cloned and tuned to your delight.

---

An outer barrel for the airsoft G&G CM16 Raider platform. 
- This barrel was designed to fit in the space from the receiver to the handguard endplate, when this last one is secured on the second pair of bolt holes (see images) in the standard CM16 Raider handguard.
- The total length is enough to fit a 155mm inner barrel.
- The internal channel fits the inner barrel snuggly, and may need some redimensioning depending on 3D printer settings. 
- The external end thread is a default 14x1mm CCW thread.
- The inner thread is a 19.7x1mmCW thread designed to fit the threaded adapter between the receiver and the standard outer barrel on CM16 Raiders.

References:
- [Onshape Model](https://cad.onshape.com/documents/d4b683fcd4d3615bdb99047b/w/bab50d3bd9baf1b9fa2e1c29/e/bb1ab55ca1843321fd8b1530?renderMode=0&uiState=656685aa20252f66de32fde0)


CM16 Outer Barrel

Outer Barrel.stl

This is a rig for scanning 35mm slides or film with a mobile phone.  There are two different orientations: landscape and portrait, so print one or both of them as you need.  You'll need two of the support pieces. You'll also need aluminum tape, a battery box for 2 AAA batteries (55mm x 30mm), 50mm of thin wire, a slide switch (16mm x 8mm), and a 3v white LED.

Line the inside of the light box with aluminum tape.  Feed the positive wire of the battery box through the opening for the switch and solder it to one of the switch terminals.  Solder the loose thin wire to the other terminal and feed it through the opening toward the battery box.  Glue the switch into the opening.  Solder the thin wire to the positive leg of the LED.  Solder the black wire from the battery box to the other LED leg.  Wrap the LED legs in electrical tape so that they can't short.  Feed the LED through the channel until it's in the center of the light box.  Use a dab of hot glue to keep the LED near the bottom of the light box.  Then neatly rout the wires around the battery box and glue it down.

Glue the top of the supports to the slots in the top piece.  Then glue the bottom of the supports to the slots in the base.  Lastly, snap the lens onto the top of the light box.

I used black PLA for everything but the lens, which was made with white PLA.  When printing the lens, use 100% infill.

iPhone Slide Scanner

slide-scanner-base.stl

I needed to a mount for a lire on my Bach marching band trumpet, so I designed this. It clips on to the 2 main tubes on the top, between the pinky ring and the tuning slide. It uses the the cross bar to locate it and might be different on your trumpet, meaning it might not fit.

The holes are sized for M5 bolts to tap it as they go in.

If you have a nice trumpet that you don't want scratched up, I recommend against using this. I don't care about mine, it is already dinged up.

Trumpet Lire Mount

Trumpet Lire Mount v2.stl

Original design by PhD Poturak Semir: www.Linktr.ee/3esign : No needs for supports, regular print settings should do.

Spyder Fidget

Spyder Fidget.stl

STEP files for modification. 
Contains the original model files for the tool head, pusher and slider.
Compatible with TrapezoidalClip 4mm/6mm Mounting System.


This work is licensed under a Creative Commons (4.0 International License)

用于修改的 STEP 文件。
包含工具头、推杆和滑块的原始模型文件。
与 TC4 TC6 固定系统兼容。


本作品采用知识共享（4.0 国际许可协议）进行许可。

Hobbies

Categories

New Uploads

Personalize

Trending

Popular

Makes