HC-SR04 Ultrasonic sensor 3D model. Used in DIY electronics projects for measuring distance or detecting objects with a range of up to 4 meters. You can find a complete guide how to use the [HC-SR04 Ultrasonic sensor with Arduino at HowToMechatronics.com](https://howtomechatronics.com/tutorials/arduino/ultrasonic-sensor-hc-sr04/)

HC-SR04 Ultrasonic Sensor 3D Model

HC-SR04 Ultrasonic sensor 3D model. Usually used for Arduino based electronics projects. You can find a complete guide how to use the [HC-SR04 Ultrasonic sensor with Arduino](https://howtomechatronics.com/tutorials/arduino/ultrasonic-sensor-hc-sr04/) at HowToMechatronics.com

3D Model of the SG90 Micro servo, a popular servo motor for small electronics projects.
You can check my tutorial[ how to control this servo motor with Arduino](https://howtomechatronics.com/how-it-works/how-servo-motors-work-how-to-control-servos-using-arduino/).

SG90 Micro Servo - 3D Model

MG996R Servo Motor 3D Model.  This is very popular servo motor for electronics and robotics projects.
You can check my [tutorial how to control servo motor with Arduino](https://howtomechatronics.com/how-it-works/how-servo-motors-work-how-to-control-servos-using-arduino/).

MG996R Servo Motor - 3D Model

This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2. 

See here for video: https://youtu.be/hUSOuSBmkHQ 

This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.

Files are provided for single and dual extruder printers:

Single Extruder: https://than.gs/m/930949 
Dual Extruder: https://than.gs/m/930954 

Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file. 

For the Dual Extruder file set, you will need to combine the appropriate “-Infill” and “-Shell” files in your slicer.

To complete your set of headphones you will need to:
•	Download and print the remaining pieces from https://than.gs/m/908651 
•	Purchase electronics from https://headamame.com/  

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA


Gyroid Cones for Head(amame) Headphones - Dual Extruder Files

Gyroid Cone Bottom Right no Mic - Infill.stl

Gyroid Cones for Head(amame) Headphones - Single Extruder Files

Gyroid Cone Bottom Right no Mic.stl

**Buck Your Voltage!**

Buck Converters are commonly used to step DC Voltage down in various electronics projects.  On 3D Printers we often use the LM2596 to step down 24v to 12v for Fans and other modifications.  This mount allows you to safely attached a LM2596 anywhere with VHB tape or M3 screws.

Designed with 1" wide VHB tape in mind, but also features 3 - M3 sized holes in the middle so you can secure it to an extrusion or your own design. Step file included for designing around this mount.

---------------------------------------------------------------

- **Necessary Hardware (Affiliate Links):**
  - LM2596: https://amzn.to/3CCpM5y
  - Double Sided VHB Tape: https://amzn.to/3ihijQ1
  - 2x M3 Screws (to Mount the Buck): https://amzn.to/3JPkTIz    

---------------------------------------------------------------

- ** PRINT PARAMETERS:**
  - Recommend 3 Perimeters 
  - 10%+ Infill (I use Rectilinear) 
  - NO Supports Required

---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

---------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally

Buck Converter Mount - LM2596 VHB or Bolt-On

LM2596_Buck_Converter_Mount_V1.step

I made this design many videos ago. Its a base for holding an Arduino or CHIPINO module that works well with my book:
 Arduino - A Beginner's Guide to Programming Electronics.
I'm sharing three main chapters here that can help you understand how your 3D Printer works.

Chapter 2 - Flash an External LED (Digital Output Example)
Chapter 6 - Sensing a Switch (Digital Input Example)
Chapter 7 - Read a Potentiometer (Analog to Digital Converter Example)

Download the file to get the .stl and the free three chapters.

CHEPINO-Arduino Base

Here are the files for my Haunted Candle a fun print for your Halloween Decorations

There is a version that includes a wick (Candle Stick) 

and one that includes a pathway for a LED and wires (Candle Powered)

The Candle Stick Holder has a void in the base to allow for electronics such as a modified Tealight to be added to power the LED in the candle, you can also use the rubber flame from the tealight in the top of the candle.

Though my good friend Grafit wanted to use LED's that he had to hand, so modelled an AWESOME flame to use with a standard size LED. he has kindly allowed me to upload the flame along with the haunted candle.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

https://www.buymeacoffee.com/bugman140

The Haunted Candle

candle-stick.stl

**Tune in to the latest PiOS!**

Who doesn't love the classic look of a faux wood grain encased tube TV? Why not have a Raspberry Pi Case that looks like a Vintage TV? Well if that's what you want, YOU ARE IN LUCK!

This design is a case that houses a BigTreeTech TFT50 V2.0 touchscreen.  This allows you to mount the screen, a Raspbery Pi of your choice (Pi Zero 2w, Pi 3B, Pi 4B) inside and use it as a touchscreen interface or a kitchy little tv computer! There is a single 40mm fan mount in the back to cool the electronics and 2 access holes for passing wiring in and out.  

There is room to plug USB cords into the USB-A plugs on a Pi 4B / 3B, and to access the GPIO pins. I cannot garauntee access to the USB-C port, HDMI, or other ports on the Pi 3/4B unfortunately.  This was designed for use as  KlipperScreen / Klipper install for controlling my 3D Printer "ReAniMaker".
---------------------------------------------------------------

**Parts necessary for assembly (Affiliate Links):**
- BigTreeTech PiTFT50: https://amzn.to/3w2xzH1
- M3 Hardware (threads into the plastic body for various parts): https://amzn.to/3IPU7Te
- 5V 40mm Fan: https://amzn.to/3QG3hn6
- Raspberry Pi: good luck... 

---------------------------------------------------------------

 **Files Included:**
- TV Front
- TV Main Body
- TV Foot (Print x4)
- TV Back
- PiTFT50 Screen Retainer Bracket

---------------------------------------------------------------

 **PRINT PARAMETERS:**
- Recommend 3 Perimeters 
- 10%+ Infill (I use Gyroid) 
-  Supports Required

---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.MandicReally.com/links

---------------------------------------------------------------


**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally

Pi TFT50 TV - Vintage Tube TV Raspberry Pi case!

Pi_TFT50_TV_V3.step

---

📝 Description

---

Unique phone stand that allows you to select  multiple positions using a gear like interface.  This is 3 prints, you simply need to insert the inner print into the outer print.  Print these without supports on the build plate sideways.  There is a hole at the bottom for a cord or to allow sound through.  Have fun!
&nbsp;

---

🖨️ Printing Tips

---

3 walls, no supports. 
&nbsp;

---

🔗 Additional Information

---

This is a simple print to assemble, just insert the insert into the base, then prop up your phone and enjoy!

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
&nbsp;

---

⚖️ License

---

**Open Source License (Completely Free)** 🟢
🔄 *Attribution* | 🎨 *Remix* | 💼 *Free for Personal Use* | 💼 *Commercial Use*


&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀







GearSupport Phone Stand 

Phone Carriage.stl

Model By: https://www.instagram.com/promethian_armoury/

This is the Super Laser featured in the Marvel Realm of Champions mobile game. I had this model made by Promethian Armoury for a special collaberation Youtube video in partnership with Marvel and Kabam Games.
https://www.youtube.com/watch?v=w4TgaarkOW4

Featuring chambers to house electronics and more, this is a simple fun little print that can be retrofit on nearly any iron man suit!

Iron Man Super Laser 

Spring is here!  Its time to build some soil sensors for the garden. 

The HydroGuardian 3D models consist of a streamlined sensor housing and a user-friendly, snap-together electronics enclosure. The sensor housing is designed to securely hold the soil sensor, ensuring accurate measurements in your garden. The electronics enclosure protects the ESPHome and other vital components from the elements, while providing easy access for maintenance or modifications. Both parts of the assembly are fastened together using screws for a reliable and stable build. These 3D models are specifically designed to enhance your DIY gardening experience with the HydroGuardian system by combining aesthetics, functionality, and ease of assembly.

See this in action by checking out the video https://www.youtube.com/watch?v=4CV8NPaiGnc

Bonus Plant Model https://thangs.com/mythangs/file/862011
Light up or backlight a plant in your home. 

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work? 
- Subscribe to the YT channel 
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!

HydroGuardian - A DIY WiFi SoilSensor for Home Assistant

Soil Sensor Assembly.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4762541.

These files go with the DIY Laser Engraver Video series by MakersMashup. 
You can use whatever diode laser you like for this build and can easily modify the mount in tinkercad. STEP and other files will be available soon for download as this is an open source project. 

Part 1 https://www.youtube.com/watch?v=EiLW0ShoJSo
Part 2 https://www.youtube.com/watch?v=jlRYsr-DPnw

Bill Of Materials: https://docs.google.com/spreadsheets/d/1941MX_unygXKNyOXyYuebtPZSNTEd63eybxU7UnPC10/edit?usp=sharing
Firmware Repo: https://bitbucket.org/makersmashup/workspace/projects/LL

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. 

Was this model helpful for you? Consider supporting my work in any of the following ways!  Even the free options help the channel!

Consider dropping a tip https://koji.to/k/8E9J or
consider supporting my ongoing work https://www.patreon.com/makersmashup
Purchase anything on amazon after visiting our store page https://amzn.to/429HusI  Just click this link first!

No cost option to support my work? 
- Subscribe to the YT channel 
- Follow me on Thangs.com
- Watch videos on the channel!
- Share any of the videos on social media!
- Share my models with friends and family!

DIY Laser Engraver | LayerFused L301

This machine was designed with the goal of being fully 3d printed. The price for this machine (Excluding control electronics) is about 600$. The frame is made up of 2020 and 2080 extrusions. The motion is handled by MGN15H linear rails, ball screws and Nema 23 Stepper motors (Nema 17 for Z-Axis). Due to this there is no play and the entire machine is very rigid and accurate.

It has a usable build volume of 360x360x75mm

If interested about the build process, I made a video about that: https://youtu.be/GlJae67H9mo
There is also a video about the electronics: https://www.youtube.com/watch?v=l93nA2cq8AY
First machined part: https://www.youtube.com/watch?v=HnPgMNhFqeY
Testing some materials: https://www.youtube.com/watch?v=mrgjkNgXUfE

Playlist: https://www.youtube.com/watch?v=GlJae67H9mo&list=PLVfOFW5xBHStf1y7x-9UYrqYRcM5o7rV_&index=1&t=0s

You can also check out the Thingiverse page. There may be some files that I can't upload here. https://www.thingiverse.com/thing:5344348

Update (22.03.2022): I've added the parts used for the electronics
Warning: mount_01 leaves mains voltage exposed. Don't use it if you don't think of fixing it.

Update (27.07.2022): After a bit of machining I had to make a change to the machine. I updated the Z_Carrig_Main_Part model to use a better mounting solution for the 500w spindle. I also updated the Spacer_Normal_14 model (no name change). I'm not making it part of the main file because I haven't and won't test it. However, it should be a much better solution since it eliminates the need to drill precise holes in the baseplate. I would recomend using it instead of Spacer_Normal_14 and Spacer_corner_1.

Check out my latest video where I not only show these changes but also how I machined something from multiple sides. https://www.youtube.com/watch?v=QsKsJzvEbPQ

3D Printed CNC Router

CNC-Router v69.stl

Thangs didn't let me upload images but you can see some here: https://ibb.co/zP38gpd 

This case will fit an skr mini E3, tft35 E3, and a raspberry pi 4b
I would recommend replacing the stock board fan with a quiet one. I personally used one from rs components as they have quiet 24v ones
https://americas.rsdelivers.com/product/rs-pro/od4010-24lb/rs-pro-24-v-dc-dc-axial-fan-40-x-40-x-10mm-85m-h/1442036

This is a remix of two Ender 3 electronics cases:

https://www.thingiverse.com/thing:3434509
https://www.thingiverse.com/thing:4548395

This case is able to hold a SKR mini, Raspberry Pi 4B, and a TFT35 E3(in my opinion the best of both cases)

I "mixed" them using TinkerCad.

Printing: I would recommend using custom supports for the Raspberry Pi shelf and the upper rear end(see image)
and using infill of at least 20%.

I included a screenshot of the custom support blocks I am using and the project file for it from Prusa Slicer. I think it also includes my profiles(PLA on MSDD, & UBL Gcode startup)

NOTE: I would consider this a Frankenstein model, I honestly cut parts from one case and added it to the other. I am learning fusion 360 so I hope to be able to build from the ground up soon(it would still be a remix of course)

3D PRINTING SETTINGS
20% infill or more
uses custom supports for the Pi shelf and upper rear wall
you can use supports everywhere but prepare for a lot of post process work

Update 2:
- thickened walls
- cleaned outer walls some more and some edges
- minimized Raspberry Pi's shelf(should make supports much easier)

Update 1:
-added a "slot" to the right inner wall to allow the SKR board to be more easily installed. first version had clearance issues when installing the SKR mini board
-added holes for the USB-C and 1 of the HDMI ports for the Raspberry Pi.
-cleaned up the sides a bit.
-widened the holes for USB and ethernet ports for the Pi (for better fit)
-improved the custom supports in the 3mf file


Ender 3 Electronics Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5650360.

When I saw this fractal vice by Teaching Tech I couldn't resist making it my go-to electronics vice!  I've been using it for a few weeks now, and it has been a game changer.

Parts List:
- [Soldering helping hands set with LED magnifying light](https://www.amazon.ca/gp/product/B095SY2G7B/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
- 1x USB Female end.
- 4x M3x20 Socket head screws

I also added a simple LED control housing for a cable-managed solution.  This can still be powered by any 5v wall plug, as the cable is passed to a female USB A out.

To build, go over to Teaching Tech's original submission, download their files, and just replace the "holder" files with mine.

NOTE: These are M14 x 1.5 threads.  I'd suggest printing at .12 or better to ensure those threads come out nice and crisp.


Fractal Vice - Helping Hand + Ringlight Mod

**Pica-Pica... PICO? Idk...**

While assembling my Voron V0.1 with a BigTreeTech Pico board I didn't care for any of the existing mounting options I found on to print.  So I designed this mount for the BigTreeTech SKR Pico board on my Voron V01. It also integrates Cable management down the center of the electronics compartment that accepts the BOM zip ties.

The design can get a little cramped on the left side of the board with cable management, but this was done so you can still use the GPIO connector cable with the board.  It exits out that left side so I needed it as close to the left as I could get it to reach my Pi Zero 2w.

Uses M2 screws to mount the Pico board to the bracket and M3 screws to mount through into the V0's extrusions (with pre-loaded nuts). 

I also designed a 40mm Fan mount to cool the BigTreeTech SKR Pico board that you can find here: https://social.thangs.com/m/54669

---------------------------------------------------------------

- **Necessary Hardware (Affiliate Links):**
  - 2x M3 Screws (to Mount the Bracket): https://amzn.to/3JPkTIz
  - 2x M2 Screws (to Mount Board)
  - BigTreeTech Pico Board: https://amzn.to/3HLswOF
  - Raspberry Pi Zero 2W: https://www.raspberrypi.com/products/raspberry-pi-zero-2-w/
  - Raspberry Pi 4: https://amzn.to/3pHeyas

---------------------------------------------------------------

- ** PRINT PARAMETERS:**
  - Recommend 3 Perimeters 
  - 10%+ Infill (I use Rectilinear) 
  - NO Supports Required

---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

---------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally

BTT Pico Board Mount for Voron V0.1

Voron_V0_BTT_PICO_v2.step

---

📝 Description

---

The Phone Prop Fob is a fast and easy 3D Print that will prop up your phone for viewing or taking pictures.  The great part of this is that it hooks onto a large keyring allowing you to always have it on the go.  You can also use it as a lanyard or even with a wrist strap.  No setup or configuration, just drop your phone into one of the slots or use the lever slot at the tip to prop the phone up.  5 Sizes are included so you can print multiple sizes for different phones/cases. 

This is a great Etsy Seller! These are inexpensive prints and great draws for customers.  Inexpensive but a great seller in your store or flea market booth.
&nbsp;

---

🖨️ Printing Tips

---

.2 or smaller layer height really makes this a nice print.  I used florescent filament which in the sun draws attention quickly!
&nbsp;

---

🔗 Additional Information

---

You will require a larger keyring for these but they work great with paracord too!  They are awesome as zipper pulls as well.  Many ways to use this fob other than the phone. 

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.
&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 🎨 *Remix* | 💼 *Free for Personal Use + Resale with Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀







Phone Prop Fob - Phone Stand / Selfie Stand

Phone Prop Fob - 10.stl

This is a case I designed to move the electronics outside of an enclosed Ender3V2. I hope to some day find time to design better air flow in the case. But this has been running for quite a few months and hasn't had temp issues, so maybe the current design is adequate. 

The blog post to go with this is at https://3delectronic.com/2020/12/21/enclosing-the-ender-3-v2-part-4-installing-the-new-electronics-case/

Ender3V2 External Electronics Case

The base for an external electronics case for the Ender3V2. 

Ender3V2 Base

**REANIMATE Your Printer!**

Want to take a classic MakerBot Replicator wooden box 3D printer (or similar clone) and print like a Voron with it???  This project is a full Core-XY conversion for the original Replicator! It replaces the original kinematics with all new printed parts and moves the motors to the rear of the case.  The original motors can even be used! Though I recommend replacement as mine were weak and overheated easily at higher speeds.

Some modification to the casing is required for the belts to pass through, and additional bolt holes for mounting! Some new hardware will be required as this was designed to use the same idler bearings and much of the same hardware as the Voron V0.1.  You can find links below to the necessary hardware!  No electronics parts are included as the configuration of that is up to you.

This project is not for the faint of heart, but I've provided the CAD STEP file of the complete design (in its orientation on the original MakerBot CAD model) so you can modify it as you need.  Or you could use it as a basis for converting a newer Replicator or a similar clone to Core-XY.

The X-Carriage and Toolhead assembly were designed to use the Phaetus DropEffect XG hotend, and the Annex Engineering Micro-Sherpa 3d printed extruder.

See the "README_Instructions" for photo references and more information about the build.

**Videos about this project:**
- https://youtu.be/4QKAGwknMiU
- https://youtu.be/V0_uvYiFAlQ
- https://youtu.be/sibyHlC4BQ8

---------------------------------------------------------------

 **Necessary Hardware (Affiliate Links):**
- Voron V0.1 Hardware kit (Contains of M3 screws, Bearings, Heat Inserts, & Bearings): https://amzn.to/3H2JydZ
- Motor Cogs: https://amzn.to/3WaOl1v 
- GT2 6mm Belt: https://amzn.to/3Gxj8zK 
- Omron Micro-switch (x-limit): https://amzn.to/3W8c1Ug
- DropEffect XG hotend: https://3dhub.ca/products/dropeffec-phaetus-xg-hotend?sca_ref=2790866.Fjs3GE1r9G
- Polymaker Filament: https://tinyurl.com/PolymakerASA
- Micro-Sherpa Extruder: https://github.com/Annex-Engineering/Sherpa_Micro-Extruder
- LDO NEMA14 for Extruder: https://amzn.to/3kgZd0h
- 5015 Blower Fan: https://amzn.to/3QBHlto
- **OPTIONAL** 2A NEMA17 motors: https://amzn.to/3w3s8I2

---------------------------------------------------------------

**PRINT PARAMETERS:**
- Recommend 4-5 Perimeters 
- 40%+ Infill (I use Gyroid) 
- NO Supports Required (except on - hotend mount)
- ASA / ABS filament HIGHLY recommended!!

---------------------------------------------------------------

Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.HotRodHippie.com/links

---------------------------------------------------------------

**All of my Designs are covered by a Creative Commons Non-Commercial License.**  Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.

PLEASE Credit any and all Remixes of my designs: MandicReally

HobbiesElectronics & Gadgets

Categories

Popular

Personalize

Trending