tracking pixel
profile hero image
CharlesRegaud’s profile picture
CharlesRegaud’s profile picture

CharlesRegaud

Marcel R
Mimetics 3
BigBoomPrints
763
Built Over B
Bamingo D
A
5
41,466
3,343
89
1,313

Designer posts

MALLA Wall Light
Smaller version available

MALLA Wall Light Smaller version available

I finally found the time to work on a smaller version of my MALLA wall lamp.The small version has a diameter of Ø209mm, so it should fit on Prusa and Creality printers and other brands.The original Large size hasn't changed and is still Ø248mm.The bases also got an update.The mounting bracket for t

PISA planter update:
additional (smaller) size

PISA planter update: additional (smaller) size

The self-watering PISA planter now comes in 2 sizes, to accomodate more printer sizes.- Large version: Ø 245mm x H 200 mm- Smaller version : Ø 205mm x H 170 mm, that works for PRUSA users.Product page HERE.Enjoy!Charles

ORIGAMI print-in-place

ORIGAMI print-in-place

This update was long due.The original design of the Origami lamp was causing some troubles.There were some thickness irregularities due to the tricky geometry of the lamp.Problem solved with this new version that is a "full volume" all over.Even the triangular legs at the bottom have volume, so the

Draped Elegance table lamp
design variations

Draped Elegance table lamp design variations

This lamp was the second product I ever posted and was in need of some little improvements.First off, Prusa users will be happy to know that there is now a smaller version of the shade and base that can fit on their printers.The smaller shade version has a diameter of Ø208mm and a height of 218mm.T

TERMS & CONDITIONS clarifications

It seems some people have been using my product photos in their own instagram posts or websites, as well as my own product descriptions word for word or translated into various languages.Product photos and descriptions should be unique so as not to crowd the internet with duplicate listings.So here

Updated base design
for the ORIGAMI lamp E14, E26, E27

Updated base design for the ORIGAMI lamp E14, E26, E27

The legs of the original base were slightly too thin and easily caused stringing and surface defects, or sometimes the print would get knocked off the bed by the printhead because the legs would move too much. This updated base has thicker legs and prints very nicely.Also, the base now comes in two

Additional smaller version available

Additional smaller version available

PRUSA users asked me for a smaller version of this KETE lamp that could print in a 210 x 210 x 220mm volume.So I obliged!This smaller version has a diameter of only 209mm (against Ø255 diameter of the original one) and a height of 215mm (against 240mm).Also, I made the weave lines a little bit thic

Additional size
for the MANDO roll holder

Additional size for the MANDO roll holder

This roll holder now comes in two sizes:- the original size (height 250mm)- and a shorter version (height 215mm) for PRUSA lovers or other printer types with smaller volumes.I'm also working on resizing most of my lamps so they can fit on smaller printers.Updates coming soon.Happy printing!

Marcel R
Mimetics 3
BigBoomPrints
763
Built Over B
Bamingo D
A
5
41,466
3,343
89
1,313
Sort by: