tracking pixel
CharlesRegaud

PFEIFER | Mini Power Whistle

by
CharlesRegaud
Follow
Follow
Remix Model
CharlesRegaud
CharlesRegaud
Image 1 of 6
PFEIFER  |  Mini Power Whistle 3d model
2D
3D
Makes
PFEIFER  |  Mini Power Whistle 3d model
PFEIFER  |  Mini Power Whistle 3d model
PFEIFER  |  Mini Power Whistle 3d model
PFEIFER  |  Mini Power Whistle 3d model
PFEIFER  |  Mini Power Whistle 3d model
PFEIFER  |  Mini Power Whistle - I won't say it's an easy impression, you need to have a good grip on the bed, but it's the fundamentals.

Apart from that, the whistle is perfect, beautiful and loud.
 - 3d model
267 Likes868 DownloadsApril 25, 2024


PFEIFER | Mini Power Whistle

Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle.

It takes only 10g to print and is available in 2 sizes, Regular and Mini, and a variety of tones:

  • Regular in mid-tone 2.5KHz
  • Regular in high-pitch 4KHz
  • Regular in dual tone (2.5KHz + 3.5KHz)
  • Mini in high-pitch 4KHz
  • Mini in mid-tone 2.5KHz

Our cute rescue dog responds surpisingly well to the 4KHz.

Don't mind the print quality on the pictures. I live in Taiwan (but I'm French.. long story..) and raining season just kicked. It's so humid it's almost impossible to get my prints right.

Anyway... Happy printing!

V2 UPDATE: The keyhole on V1 versions was a bit too small, so was enlarged on V2.

DIMENSIONS (Regular) | W 35 mm x D 15 mm x H 50 mm

DIMENSIONS (Regular) | W 30 mm x D 15 mm x H 36 mm

PRINTING | 30min

All STL files are already oriented properly.

Infill: 20% Wall line count: 2 Resolution: 0.2~0.3mm/layer or less (the bases in the pictures were printed in 0.2mm/layer) Build adhesion type: Brim 4mm Supports: None


267 Likes868 DownloadsApril 25, 2024




267 Likes868 DownloadsApril 25, 2024