🔧 REQUIRED HARDWARE You will need: 2x 4010 cooling fans M3x14 screws M3x8 screws M3x16 screws M3x3 heat insert nuts Upgrade your charging station with a clean and functional cooling solu

Remix of https://www.printables.com/model/424690-ender-3-s1-sprite-pro-cooling-with-5015-v2-heatsyn For cooling heatbreak and parts with 5015 cooling fan. Adapted for original screws from sprite e

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4580010. If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Crealit

A minimal, foldable print in place, housing for the Raspberry Pi Zero 2 or Banana Pi M2 with cooling and heatsink. Design This is the reduced to the max case / housing / sleeve for the Raspberry

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4894561. Update 20\07\21: Uploaded Blade Duct with a notch to the left hand side to clear the heater cables in a stock ho

A minimal, foldable print in place case / housing / sleeve for the Raspberry Pi Zero 2 with live hinges (with cooling). Design This is the reduced to the max case / housing / sleeve for the Raspb

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5511666. Русская инструкция K3D Ender-3 Sprite Printhead Summary Cooling system

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4881770. THERE IS A NEWER VERSION OF THIS THING HERE: https://www.thingiverse.com/thing:4894561 Update: 10\06\21 Uploa

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5511666. Русская инструкция K3D Ender-3 Sprite Printhead Summary Cooling system

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1374248. Compact Print Cooling Shroud for the E3D V6 or lite6. Fins inside shroud direct cooling air to nozzle. He

After being disappointed with the stock Ender 3 part cooling duct, I decided to design my own. This part fits directly to the original Ender 3 pro part cooling fan without any extra parts. Simply remo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4587406. Attention: This is my first attempt and the 4020 part cooling fan wasn't as good as I hoped it would be. Sunon f

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6049251. YET ANOTHER AUTO POWER-OFF (AFTER COOL DOWN) FOR ENDER 3/PRO Features: Only 2 printables (No support) P

"COOL SMILE" 😎😊💡 Adiciona um toque de descontração e alegria ao teu espaço com esta adorável caixa de luz "Cool Smile"! Com um sorriso descontraído e fresco, esta peça vai iluminar o teu ambiente

There are quite a few laptop stands models for 3d printing. Most offer a fixed position and a select few adjustability. However very few offer multi-axis adjustability and the capability to elevate

Trucker Gnome Mirror Hanger for Cool Kids Do you have a sad and unadorned rear view mirror? If so the Trucker Gnome Mirror Hanger for Cool Kids is just for you!! You are a cool kid, aren't you?

Part cooling duct for BIQU H2 using 5015 fan. Orient the duct for printing upright as it will be used. Print using supports under the full base I painted support requirements on the full base using Pr

Say Hi to the Summertime Cool Pool Cat - add a splash of whimsy to your decor with the Summertime Cool Pool Cat. This charming piece captures the essence of carefree summer days, featuring an ador

Modified Integza's water cooled Jet engine. - Added a water cooled diffuser. Yeah, yeah, you can just add a type of gasket to solve the heat problem, but we are focused on the water cooling idea... S

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5205711. This is a Car Fan Funnel. Both bigger parts can be connected with a hose or pipe. This was used to cool down a c

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2884225. If you use water cooling on your printer, here is a small housing to neatly package the radiator and water pump.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2760563. Update: 22_03_18 File: BD62-3mm_22_03_18.stl Raised base of duct an additional 3mm from the Build plate to

Mini 4WD 3-Motor Break-In Holder with Dual Cooling Fans Optimize your Mini 4WD motor break-in process with this compact and efficient 3-in-1 Break-In Holder. Designed to hold and run up to three moto

DANGER NOODLES! While running the AnyCubic Kobra Max I found that the part cooling ducts left something to be desired. Yay the machine has dual 4010 fans, but they exit the shroud too far from t

Super Duper Dice Clicker Fidget for Cool Kids Are you a cook kid? Do you love clickers? Are you looking for a way to annoy others? If you answered "Yes!" to any of those questions our Super Dupe

Here's a mod for the FLSUN super racer end effector. (I have now uploaded a main body which accommodates sherpa mini.) Using a HGX Lite extruder and 3x 5015 fans you can convert the bowden setup to d

Enhance your polymer clay creations with our Cool Waves Texture Mat Digital STL File. This downloadable file provides you with the perfect tool to use on your jewelry or cookies. Please note that th

This is my solution to the DJI Mini 3 stationary overheating issue. Attach an 80MM USB fan to this shroud and you have a platform that blows cool air into the mini 3's cooling ports while stationary p

New upgraded fan housing with a circular duct for stock CR10 4020 part cooling fan. This fits stock(4020) CR10 part cooling fan. Support only to build plate!!!

A laptop/notebook cooler, cooling pad, cooler pad, or chill mat is an accessory for laptop computers that helps reduce their operating temperature, which is normally used when the laptop is unable to

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4015278. I wanted a very quiet Raspberry Pi 4B case for playing around with it as a desktop, but knew it needed active co

I was fed up with the subpar cooling that comes on the Mingda D3 Pro stock so I made my own for dual 5015 blowers. The hot end duct is a rather old design when I was first learning lofting on Fusion 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6329665. This is exactly the original Sprite Extruder cooling duct from Sorkin K3D with just a hole for the spinners / in

I'm one of the few people who still say cool beans in everyday conversations. so i made this cookie cutter to share with friends. Complete with wobbly cutter lines and Comic sans for the text, share

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4612963. I recently upgraded my Prusa MK3 heat break and hot block to the Slice Copperhead system. I did this to help el

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2772134. Change log: Re-uploaded the tusk cooler, to avoid errors when loading it in a slicer. Simple direct repl

Description Add some feline flair to your collection with this layered filament painting featuring a cool-looking cat full of personality and style. This sleek design turns a charismatic cat illus

Design Concept This 3D printed air cooling fan case is designed for efficiency and style, providing a compact and sleek look ideal for a modern aesthetic. Function It is intended to house a small ele

This spacer is designed to take up the space between the engine case and the shift lever on models of Triumph's water cooled twins where the shift lever is mounted directly to the shaft without spacer

High-Performance Cooling Solution for SkyRC NC3000 Pro Keep your SkyRC NC3000 Pro charger running at optimal temperatures with this custom-designed fan cooling enclosure. This model is engineered to

Cooling fan duct that provides better part cooling using a 5015 centrifugal blower fan for the Anycubic Mega Zero 2.0. Can be mounted without disassembling the fan shroud. One M3*20 bolt + nut needed

Meet the only pineapple that throws more shade than your ex. Ready to give your plants the biggest upgrade? Where cool can also be functional! Perfect fit for spiky succulents or any plant with attitu

Summary This is a simple magnetic cooling system which makes cleanup and accessing the hot end extremely easy. It uses 8 neodymium magnet for an old BLDC motor. They can hold 700gm-800gm easily,

Upgraded case for the Miclabo Motor Boot Camp 2, redesigned with an active dual-fan cooling system to maximize motor break-in performance. This mod features: 🔥 3010 top cooling fan to maintain st

Keep your drinks cool and your hands cozy with these stylish Cool Can CooZies! This latest set includes 6 different designs based on my new vase/planter collections. Great for identifying drinks at a

Bring home the cool and stylish Sonic with this high-quality STL file, perfect for 3D printing enthusiasts and gaming fans! 🌀🔥 This unique 3D model features Sonic in a trendy streetwear outfit, maki

Need something to store all of your cool stuff? Well, here it is! A cool container for all of your stuff with 4 spaces, your stuff is safe in here!

This louvered vent can be used on the side of cabinets or cabinet doors (as pictured) and where space permits. Its great for when you are housing computers or electronic components inside of cabinets

Explore this high-quality, unique 3D model of the Hyundai HYAC50 cooling function on Thangs.com. This model showcases a specialized setup featuring two 120mm fans mounted on the top of the compressor.

100w type C hub: https://www.amazon.com/CableCreation-Multiport-Adapter-Gigabit-Ethernet/dp/B08FWMWGTD/ref=s 40mm USB fans: https://www.amazon.com/ELUTENG-Adjustable-Computer-Compatible-Playstation/d