Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Frame: https://a360.co/3ccHbsg
- Weighted Plate: https://a360.co/3uCJ2gR

The foundation of every Gridfinity setup is a baseplate, and these let you drop storage where you need it most.

**Frame**: The absolutely minimal no-frills baseplate. No room for screws or magnets, but saves filament and headroom. If your storage unit is on a steel surface, you can still put magnets in the storage blocks to keep them from sliding.

**Weighted**: Heavy, sturdy baseplate perfect for desktops, shelves, and other places where knocking stuff over is a big problem. 

Secure blocks permanently with [M3 screws,](https://amzn.to/37IaXTg) or temporarily with [6x2mm magnets](https://amzn.to/37Ihopq). Add [rubber feet](https://amzn.to/3LZv4v5) to keep the whole shebang from sliding, and [metal tire weights ](https://amzn.to/3uAzH9f)to drop the center of gravity and prevent wipeouts. You don't need to install every magnet, foot, and weight! Just use enough for your needs.

A Prusa i3 Mk3 can print up to a 5x5 grid. No matter what you use, make sure your bed adhesion and release is dialed in - these love to curl, and their high surface area can make them challenging to remove.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider plates can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Baseplates

Weighted Baseplate 3x2.stl

Frame 1x4.stl

Frame 1x5.stl

Frame 1x6.stl

Frame 1x7.stl

Frame 2x2.stl

Frame 2x3.stl

Frame 1x2.stl

Frame 1x3.stl

Frame 2x7.stl

Frame 3x3.stl

Frame 3x4.stl

Frame 3x5.stl

Frame 3x6.stl

Frame 3x7.stl

Frame 4x4.stl

Frame 4x5.stl

Frame 4x6.stl

Frame 4x7.stl

Frame 5x5.stl

Frame 5x6.stl

Frame 5x7.stl

Frame 6x6.stl

Frame 6x7.stl

Frame 2x5.stl

Frame 2x6.stl

Weighted Baseplate 1x3.stl

Weighted Baseplate 1x4.stl

Weighted Baseplate 1x5.stl

Weighted Baseplate 1x6.stl

Weighted Baseplate 1x7.stl

Weighted Baseplate 2x2.stl

Weighted Baseplate 1x1 (super cute).stl

Weighted Baseplate 1x2.stl

Weighted Baseplate 2x4.stl

Weighted Baseplate 2x5.stl

Weighted Baseplate 3x6.stl

Weighted Baseplate 3x7.stl

Weighted Baseplate 4x4.stl

Weighted Baseplate 4x5.stl

Weighted Baseplate 4x6.stl

Weighted Baseplate 4x7.stl

Weighted Baseplate 5x5.stl

Weighted Baseplate 5x6.stl

Weighted Baseplate 5x7.stl

Weighted Baseplate 6x6.stl

Weighted Baseplate 6x7.stl

Weighted Baseplate 7x7.stl

Weighted Baseplate 2x7.stl

Weighted Baseplate 3x3.stl

Weighted Baseplate 3x4.stl

Weighted Baseplate 3x5.stl

Explore an intricately designed 3D model of a desk organizer at thangs.com under the category of devices. Crafted with great precision by the talented designer Henryshop3dforu, this 3D model represents a perfect balance between functionality and aesthetics. This model is an ideal inspiration for anyone interested in adding a touch of organization and style to their workspace. This desk organizer 3D model offers a user-friendly organized system to keep all your essentials like stationary, papers, and devices at arm's reach, reducing clutter, and aiding in productivity. The images provided give a comprehensive view of the Space-friendly, compact design, sophisticated look, and clean lines. This impressively detailed 3D model of a desk organizer is a testament to the limitless possibilities of 3D modeling. For a closer look at this desk organizer 3D model, visit our website thangs.com, and discover the limitless possibilities of 3D modeling today.

Desk organizer

Desk organizer A.stl

Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at  
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file: https://a360.co/3vbu9B5

These are perfect for storing small parts and long, thin objects like needle files, and you can stack them as high as you want! The inner surface has a generous scoop to make retrieving parts easy, and the tab fits 12mm label-maker tape.

I've provided a selection of different sizes and divider counts, to give you OPTIONS! Note that none of the compartment sizes overlap - there isn't a two-compartment 4x1 bin because you can just use two one-compartment 2x1 bins.

Dimensions in file names are Width x Depth x Height. Width and Depth units are 42mm grid slots, Height is in 7mm units. A Prusa i3 Mk3S can fit a five-unit-wide bin on its plate.

Note that two-unit-high bins don't have labels - they would cut too far into the usable storage area.

Brims and support are not required, and these can be printed in any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big!

**Gridfinity Tips!**
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Divider Bins

Divider Box 2x1x6 5-Compartment.stl

Print on a textured build plate for extra decorative top and bottom.
Tall enough to fit US, Canadian, and Euro bank notes (bills).

[Supplies](https://www.karenchaudesigns.com/supplies)
Photo shown with 1/4" ribbon
[More gift boxes](https://www.karenchaudesigns.com/3d/95)

Christmas Gift Box C Lite with ribbon loop and slot | Fits cash and various gifts

box lidC-1mmthickness_karenchaudesigns.stl

I designed this to fit my [desk lamp](https://amzn.to/47YsYH0) so I can record overhead shots like [this](https://youtube.com/shorts/x9BTFuRO6GQ?feature=share)

As an Amazon Associate I earn from qualifying purchases. If you use my affiliate link, I may earn a small commission at no extra cost to you -- thanks for your support!

Phone stand for overhead light

phone stand for overhead light_karenchaudesigns.stl

A carrying case that holds up to 27 Nintendo Switch cartridges.  Parts were printed on my X1-Carbon and Elegoo Neptune 4 Pro with 5% infill, 2 walls, and a .2mm layer height.  All parts except for the Triforce, Shield Body, and Cartridge Holder will need support material to print.  

Hylian Shield Nintendo Switch Cartridge Case

Shield Body.stl

Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!

**Includes Bambu Studio single and 2 color .3mf files.**

Rugged Organizer LARGE Gridfinity 2x3

Rugged_Organizer_LG_Gridfinity2x3.stl

A case that can hold up to 32 Nintendo Switch cartridges.  Each part was printed on my X1-Carbon with 5% infill, 2 walls, and a .2mm layer height.  The top and bottom shell pieces will need support material to print.  You will also need 12 6mm x 2.6mm magnets to assemble the heart container case.  You should be able to find some on Amazon.  

Heart Container Nintendo Switch Cartridge Case 

Shell Bottom.stl

A unique and eye-catching way to remind you to keep your plants hydrated and healthy. This flower pot, shaped like a little man with a middle finger, is sure to catch your attention every time you see it. Whether placed on your desk at work or displayed in your home, this pot is sure to bring a smile to your face and serve as a constant reminder to care for your plants.

This is sort of the v2 of my middle finger happy pot original design. I've made some exciting improvements to the Middle Finger Happy Pot by giving it more realistic hands.

Cool filament? You can buy it [here!](https://www.amazon.com/Polymaker-Marble-Filament-1-75mm-Carton/dp/B096XFLFYF?crid=3GRF34XZCJLOU&keywords=marble%2Bpla&qid=1673976405&sprefix=marble%2Bpl,aps,261&sr=8-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzQzFHOVVEOUtLUjQ5JmVuY3J5cHRlZElkPUEwMDM1NTQzRVlGNlBURUJWOVE2JmVuY3J5cHRlZEFkSWQ9QTA0NjMzODdZQlZIVjZTMFFUUFomd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl&th=1&linkCode=sl1&tag=tomodesigns05-20&linkId=246f24ab185477a5233e5945d1c9cdf9&language=en_US&ref_=as_li_ss_tl)

**Every make will be featured on my Instagram add your handle and follow me :)** Check out [my Instagram](https://www.instagram.com/tomo_designs/) if you want to see more designs like this or if you have questions!

**You can also become a seller of all my designs. Check out my [Patreon](https://www.patreon.com/TomoDesigns/) for a commercial license.**

Middle Finger Pot with Feet

Middle finger pot V2 with Feet.stl

Based on my original small Rugged Desktop Organizer, now biggie sized with flat bottom. 
 Also available in a [GRIDFINITY COMPATIBLE 2x3](https://thangs.com/designer/K2_Kevin/3d-model/Rugged%20Organizer%20LARGE%20Gridfinity%202x3-959955?manualModelView=true&source=All+Files)!

Includes Bambu Studio single and 2 color .3mf project files.

**♫ ♫ Ohhh, won’t you print this one tonight!  Ohhh, you’re gonna like this one just right. Ohhh, you gonna let your tools hang out!  Flat Bottom Organizers,  make the missing parts be found! ♫**


Rugged Organizer LARGE Flat Bottom

Rugged_Organizer_LG_FlatBottom.stl

Safely grab the right tool with the Gridfinity modular workshop storage system!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Nipper Holder: https://a360.co/37jchw3
- Stripper Holder: https://a360.co/3Erq2oV

These racks pack tons of hand tools into a small area, positioned so you can safely see and grab the business ends. These work great for nippers, flush cutters, wire strippers, pliers, scissors, crimpers, nibblers, cutters, and punch-down tools.

*These storage blocks are extra-big and tend to curl! Use a brim and ensure good bed adhesion.* 

**Nipper Holder**: Holds six tools about 80mm from handle to handle. If the tool is spring-loaded, the undercut will keep it from falling out. This can be mounted sideways to store five tools.

**Stripper Holder**: Holds two wire strippers or other long, slim hand tools up to 18mm thicc. I've prepared two sizes - 200mm is your usual multi-hole wire stripper, and 160mm fits many crimpers and termination tools. Both should fit on most printers.

**Gridfinity Tips!**
- Use any filament with an 0.6mm or smaller nozzle. 
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

---

📝 Description

---

The Stacking Filament Swatch System enables you to quickly catalog your filaments.  Use a simple DYMO Handheld labeler (or similar) to quickly mark your samples with the filaments you use. 

The 4UP pre-painted AMS file allows you to load in 4 rolls of filament and print 4 samples in around 20 minutes.  Each sample prints in entirety for only 4 color swaps.  Get your catalog built fast.  

Print as many levels and trays as you like.  A Blank one is also included so you can easily add the vendor name with Bambu's slicer.  The base and lid simply go on the bottom and top and make the entire unit easy to transport.  The trays remove so you can easily display your swatches to customers . 

&nbsp;

---

🖨️ Printing Tips

---

3MF Files are included for Bambu Slicer.  Most of the prints use 2 or 3 walls to create a solid print.  
 
&nbsp;

---

🔗 Additional Information

---

I used a Dymo labeler (https://amzn.to/41hrw0n) to add on the filament names and types.  Using Black on clear tape (https://amzn.to/41bSDtH) works exceptionally well. 

I printed these in Polymaker filament.   
Cotton White - https://amzn.to/41eh5dM
Silk Red - https://amzn.to/3GAvfMN
Black - https://amzn.to/3Gz8jh5

When it comes to hardware, I rely heavily on Bambu Lab 3D printers. My A1 Mini https://rb.gy/uofj5 is a staple in my office, while my fleet of X1C Carbons https://rb.gy/9r2az ensures rapid and high-quality production. #ComissionsEarned which help support my free model development.

&nbsp;

---

⚖️ License

---

**Free For Personal Use - Commercial Restricted License (with subscription)** 🟠

🔄 *Attribution* | 💼 *Free for Personal Use * | * Resale with Thangs Subscription*

&nbsp;

---

👥 Community

---

🌟 *Adore this model? Show some love to Rob, the one-man creative force behind Makers Mashup, and dive into more maker adventures!* 🌟

🎥 **Watch & Subscribe on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1)** - Assembly videos, tutorials, and much more. Don't miss out on new content!

🔗 **Join the Creative Journey on [Thangs.com](https://www.thangs.com)** - Follow me for the latest models and exclusive content.

🤝 **Engage with the [Community Discord](https://discord.gg/ZDKq5N2)** - Get help and advice from a large and vibrant community. Build anything with the support of fellow makers!

📲 **Get Social with Makers Mashup** - 🐦 [Twitter](https://twitter.com/MakersMashup) | 📸 [Instagram](https://www.instagram.com/makers_mashup/) | 👍 [Facebook](https://www.facebook.com/MakersMashup) - See work in progress, prints, and more.

❤️ **Support the Channel & Creator** - Your support makes a difference!
   - 🤝 [Patreon](https://www.patreon.com/makersmashup) – Support my ongoing work and get access to exclusive content!
   - 💸 Drop a tip: [Ko-fi](https://koji.to/k/8E9J)
   - 🛍️ Shop on Amazon? Click [this link](https://amzn.to/429HusI) before your next purchase. It helps the channel at no extra cost to you!

🔓 **Unlock Incredible Benefits**
   _with a Paid Subscription on [Thangs.com](https://www.thangs.com), or Select Tiers on [YouTube](https://youtube.com/MakersMashup?sub_confirmation=1) or [Patreon](https://www.patreon.com/makersmashup)_

   - Resale Abilities
   - Early Access to Models
   - Request New Models
   - Exclusive Discord Channel for Supporters with Behind-the-Scenes Content

🚀 *Let’s build, share, and grow together!* 🚀








Stacking Filament Swatch System

Filament Swatch Tray - Bambu - One Piece.stl

Display your cube puzzles and more with this simple but stylish stand! Comes in 3 sizes. Prints using standard settings, no supports required.

Cube Stands

big-stand.stl

**RUGGED DESKTOP ORGANIZER**
Based on the “sturdy and stylish” **small and scalable** Rugged Desktop Organizer Remixed to offer more storage locations for more of your things.  Two parts to offer a nice finished look in multiple, easy to print colors.
#BackToSchool
BackToSchool


Remixed based on the desk organizer: https://cults3d.com/en/3d-model/home/rugged-desktop-organizer


RUGGED DESKTOP ORGANIZER - Full Version

RuggedOrganizer_Full.stl

Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Pick Rack: https://a360.co/3JCOrIS
- Chonk Rack: https://a360.co/3xgYhO9
- Tweezer Rack: https://a360.co/3uxC0dd

These racks store long, pointy objects at an angle... but angle the business ends away from pokey fingers.

These are all two-part models. Print an Upper and a Lower and glue 'em together.

- The Pick Rack is perfect for slender tools like picks and files.
- The Chonk Rack is for thiccer tools (hey-o) like scrapers, forceps, and spring tweezers.
-  The Twizzles Rack holds tweezers. I call them twizzles because I think it's funny.

The Twizzles Rack Upper is the only piece that needs support.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Pick + Tweezer Racks

Illustration! Don't print!!

Warning: Do not eat these gift boxes. 

This box is part of a set of three different sizes. For dual colour printing, use the “Base” and “Accent” files for your selected Box and Lid. For single colour printing, you can either merge the “Base” and “Accent” files in your slicer and print them as one, or print the “Base” files without the “Accent.”

See here for video: https://youtu.be/aOIhib1lUkY 

Download the set: 
Small: https://than.gs/m/969491 
Medium: https://than.gs/m/969493 
Large: https://than.gs/m/969494 

This model is a submission to the Thangs “Wrapping up 2023” gift box design contest. @Thangs3D, @Anycubic3DPrint #WrappingUp2023 #Christmas #holiday


Taffy Box - Small

Small Taffy Box Base.stl

3D printing accessories for the Gridfinity modular workshop system - store tools, nozzles, and more!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Caddy: https://a360.co/3KzVx2a
- Bottle Holder: https://a360.co/3LVjAsC
- Magigoo Holder: https://a360.co/3KzVEe6
- Nozzle Holder: https://a360.co/3KxGS7y
- Volcano Nozzle Holder: https://a360.co/3JLhKJz
- Revo Nozzlebreak Holder: https://a360.co/3xmVPpk
- Glue Sticc Holder: https://a360.co/3vapCiq

This assortment of 3D printer organizers is perfect for printing what you love to print - accessories for your printer!

**3D Printer Caddy**: Puts emergency supplies within reach! Holds scraper, nippers, tweezers, acupuncture needles, brass brush, adjustable wrench, and nozzle wrench

**Bottle Holder**: Designed to hold Nano Polymer high-temperature bed treatment, but also fits many small spray bottles. Bottles should not shake loose.

**Dual Bulk Nozzle Holder**: Holds eight copies of two different nozzle sizes. Can stack when loaded with E3D or Creality-style nozzles.

**Quad Revo Holder**: Holds four E3D RapidChange Revo nozzle-heatbreak nozzlebreaks. Can stack.

**Triple Volcano Holder**: Holds three extended E3D-style holders, like those included with the Anycubic Vyper and Kobra. Can stack.

**Glue Stick Holder**: Holds multiple sizes of icky sticky horsey bois, particularly Elmer's small and regular, and Kores.

**Magigoo Holder**: Holds four-piece Magigoo bed treatment assortment pack, and should not allow them to jiggle loose.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity 3D Printing Bundle for Nerds

3D Printer Caddy.stl

Explore the intricately designed 3D key holder model with a shelf on Thangs.com. Crafted by the expert designer '3dprintanything', this model falls under the 'Devices' category. The key holder serves a dual purpose; providing a convenient spot for your keys and featuring a built-in shelf for added storage.

Detailed visuals of the model can be found in two images, presenting a 360-degree view of the model. The first image is an elegant png picture showcasing the key holder with its shelf. The second image is a jpg picture presenting a different angle, further accentuating the fine details of this model.  

This 3D printed key holder with a shelf offers an organized solution for your keys, ensuring they are always within easy reach. The model showcases a precise design encompassing style, simplicity, and functionality, making it an ideal addition to any home setting. 

Check out this 3D model on Thangs.com under the work of '3dprintanything', depicting creative innovation at its best. Enjoy the blend of an effective key storage solution fused with an additional shelf feature, demonstrating the productive use of 3D printing. Crystal clear images are provided for a better understanding.

The model is perfect for those seeking an extended storage solution that combines purpose and aesthetics. Designed with an eye for detail, this key holder with a shelf, exemplifies the best of 3D modelling. Immerse yourself in the world of 3D print designs at Thangs.com

Key holder with shelf

Pen, pencil, and marker storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Regular Version: https://a360.co/37EP2we
- Chisel Version: https://a360.co/3E49liU
- EXTRA THICCCCCC: https://a360.co/3jqmzx4

These holders were designed to securely store Sharpie markers, but should fit many other brands of markers and other roughly marker-shaped objects. I won't judge, you do you.

These are tall enough to keep the pens from falling out, but securing with magnets or screws is **strongly** recommended!

**Regular version**: Fits standard Sharpie markers and other round, slim objects with a diameter of 12mm or less, like brushes and test tubes.

**Chisel version**: Fits chisel-tip Sharpies, paint pens, and other stuff with a cross-section that fits a 16x22mm ellipse.

**Magnum version**: Fits the girthiest of Sharpies and other extra-thicc 27mm rods. Careful where you point that thing.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Pen, Pencil, and Marker Holders

Sharpie Holder, Chisel.stl

Gridfinity Hex Bin 1x4 Divided

Hex_Bin_Gridfinity_1x4x4_DIV.stl

Functional

Categories

Trending

Personalize