Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Frame: https://a360.co/3ccHbsg
- Weighted Plate: https://a360.co/3uCJ2gR

The foundation of every Gridfinity setup is a baseplate, and these let you drop storage where you need it most.

**Frame**: The absolutely minimal no-frills baseplate. No room for screws or magnets, but saves filament and headroom. If your storage unit is on a steel surface, you can still put magnets in the storage blocks to keep them from sliding.

**Weighted**: Heavy, sturdy baseplate perfect for desktops, shelves, and other places where knocking stuff over is a big problem. 

Secure blocks permanently with [M3 screws,](https://amzn.to/37IaXTg) or temporarily with [6x2mm magnets](https://amzn.to/37Ihopq). Add [rubber feet](https://amzn.to/3LZv4v5) to keep the whole shebang from sliding, and [metal tire weights ](https://amzn.to/3uAzH9f)to drop the center of gravity and prevent wipeouts. You don't need to install every magnet, foot, and weight! Just use enough for your needs.

A Prusa i3 Mk3 can print up to a 5x5 grid. No matter what you use, make sure your bed adhesion and release is dialed in - these love to curl, and their high surface area can make them challenging to remove.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider plates can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Baseplates

Weighted Baseplate 3x2.stl

Frame 1x4.stl

Frame 1x5.stl

Frame 1x6.stl

Frame 1x7.stl

Frame 2x2.stl

Frame 2x3.stl

Frame 1x2.stl

Frame 1x3.stl

Frame 2x7.stl

Frame 3x3.stl

Frame 3x4.stl

Frame 3x5.stl

Frame 3x6.stl

Frame 3x7.stl

Frame 4x4.stl

Frame 4x5.stl

Frame 4x6.stl

Frame 4x7.stl

Frame 5x5.stl

Frame 5x6.stl

Frame 5x7.stl

Frame 6x6.stl

Frame 6x7.stl

Frame 2x5.stl

Frame 2x6.stl

Weighted Baseplate 1x3.stl

Weighted Baseplate 1x4.stl

Weighted Baseplate 1x5.stl

Weighted Baseplate 1x6.stl

Weighted Baseplate 1x7.stl

Weighted Baseplate 2x2.stl

Weighted Baseplate 1x1 (super cute).stl

Weighted Baseplate 1x2.stl

Weighted Baseplate 2x4.stl

Weighted Baseplate 2x5.stl

Weighted Baseplate 3x6.stl

Weighted Baseplate 3x7.stl

Weighted Baseplate 4x4.stl

Weighted Baseplate 4x5.stl

Weighted Baseplate 4x6.stl

Weighted Baseplate 4x7.stl

Weighted Baseplate 5x5.stl

Weighted Baseplate 5x6.stl

Weighted Baseplate 5x7.stl

Weighted Baseplate 6x6.stl

Weighted Baseplate 6x7.stl

Weighted Baseplate 7x7.stl

Weighted Baseplate 2x7.stl

Weighted Baseplate 3x3.stl

Weighted Baseplate 3x4.stl

Weighted Baseplate 3x5.stl

Explore an intricately designed 3D model of a desk organizer at thangs.com under the category of devices. Crafted with great precision by the talented designer Henryshop3dforu, this 3D model represents a perfect balance between functionality and aesthetics. This model is an ideal inspiration for anyone interested in adding a touch of organization and style to their workspace. This desk organizer 3D model offers a user-friendly organized system to keep all your essentials like stationary, papers, and devices at arm's reach, reducing clutter, and aiding in productivity. The images provided give a comprehensive view of the Space-friendly, compact design, sophisticated look, and clean lines. This impressively detailed 3D model of a desk organizer is a testament to the limitless possibilities of 3D modeling. For a closer look at this desk organizer 3D model, visit our website thangs.com, and discover the limitless possibilities of 3D modeling today.

Desk organizer

Desk organizer A.stl

This epic dice tower is free for the first week only! Roll your dice with style!

Show us your makes!

For commercial license to sell physical prints and more, subscribe to thangs memberships!

Demon Dice Tower! 

deamon-dice-tower2.0.stl

Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at  
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file: https://a360.co/3vbu9B5

These are perfect for storing small parts and long, thin objects like needle files, and you can stack them as high as you want! The inner surface has a generous scoop to make retrieving parts easy, and the tab fits 12mm label-maker tape.

I've provided a selection of different sizes and divider counts, to give you OPTIONS! Note that none of the compartment sizes overlap - there isn't a two-compartment 4x1 bin because you can just use two one-compartment 2x1 bins.

Dimensions in file names are Width x Depth x Height. Width and Depth units are 42mm grid slots, Height is in 7mm units. A Prusa i3 Mk3S can fit a five-unit-wide bin on its plate.

Note that two-unit-high bins don't have labels - they would cut too far into the usable storage area.

Brims and support are not required, and these can be printed in any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big!

**Gridfinity Tips!**
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Divider Bins

Divider Box 2x1x6 5-Compartment.stl

Roll if you dare. Free this week only.

Show us your makes!

For commercial license to sell physical prints and more, subscribe to thangs memberships!

Creepy Dice Tower! 

creepy-dicetower.ZPR.stl

Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!

**Includes Bambu Studio single and 2 color .3mf files.**

Rugged Organizer LARGE Gridfinity 2x3

Rugged_Organizer_LG_Gridfinity2x3.stl

Based on my original small Rugged Desktop Organizer, now biggie sized with flat bottom. 
 Also available in a [GRIDFINITY COMPATIBLE 2x3](https://thangs.com/designer/K2_Kevin/3d-model/Rugged%20Organizer%20LARGE%20Gridfinity%202x3-959955?manualModelView=true&source=All+Files)!

Includes Bambu Studio single and 2 color .3mf project files.

**♫ ♫ Ohhh, won’t you print this one tonight!  Ohhh, you’re gonna like this one just right. Ohhh, you gonna let your tools hang out!  Flat Bottom Organizers,  make the missing parts be found! ♫**


Rugged Organizer LARGE Flat Bottom

Rugged_Organizer_LG_FlatBottom.stl

Warning: Do not eat these gift boxes. 

This box is part of a set of three different sizes. For dual colour printing, use the “Base” and “Accent” files for your selected Box and Lid. For single colour printing, you can either merge the “Base” and “Accent” files in your slicer and print them as one, or print the “Base” files without the “Accent.”

See here for video: https://youtu.be/aOIhib1lUkY 

Download the set: 
Small: https://than.gs/m/969491 
Medium: https://than.gs/m/969493 
Large: https://than.gs/m/969494 

This model is a submission to the Thangs “Wrapping up 2023” gift box design contest. @Thangs3D, @Anycubic3DPrint #WrappingUp2023 #Christmas #holiday


Taffy Box - Small

Small Taffy Box Base.stl

This is a kit I made to make the Vive DAS (Deluxe Audio Strap) useable with the Bigscreen Beyond

Thank you @whinnyrab (RockyRob) for images and testing as im still waiting for my Beyond to be made.

Not included (Required):
- 3M VHB dubble sideded adhesive (For the top mount)
- Apple USB-C to 3.5mm Audio Jack DAC
- Vive Deluxe Audio Strap

Print settings:
- At least 0.2 mm layer thickness
- Thick enough for PLA
- Play with positions but I have seen it print best how its imported.
- Print with 75%-100% infill
- Supports everywhere at 50 deg. overhang

If you have any issues feel free to dm me on Discord (@raynevr) or Twitter / X (@rayne_vr)

Bigscreen Beyond to Vive Deluxe Audio Strap Kit

BSB_to_Vive_DAS_adapter_LEFT.stl

Snowflake Mechanical Box is a 3D printable model that lets you create your own festive and fun box for the holiday season. It is a remix of the [Mechanically Locking Container](https://www.printables.com/model/478901-mechanically-locking-container) by [JamesThePrinter](https://www.printables.com/@JamesThePrinter), but with a snowflake theme. The box has a knob that is shaped like a snowflake, and the box contour is full of snowflakes. The box also has a clever locking mechanism that prevents it from opening unless you twist the knob in the right direction.

Snowflake Mechanical Box is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. You can also print it in different colors and combinations to create a more colorful and festive look. The model comes with knobs of three different sizes, four bases with different heights, and two lids with different finishes to customize the box. To assemble, you just need to glue the knob to the inner linkage and snap with the mid linkages and outer linkage.

Snowflake Mechanical Box is a great way to store your gifts, candies, or other items for Christmas. It is also a fun and challenging puzzle for your friends and family. You can give it as a gift or use it as a decoration for your home or office.

This model is part of the 🎁 Wrapping Up 2023 Contest 🎁 @Thangs3D, @Anycubic3DPrint #WrappingUp2023 #Christmas #holiday

Download Snowflake Mechanical Box today and enjoy this beautiful and original 3D printable model!

If you like this model, please leave a comment and a rating. Thank you! 😊

This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs unless the original designer has the Commercial Use License that let you sell physical prints of the model.

To sell them legally, message the designer.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Snowflake Mechanical Box

Snowflake Mechanical Box Base 30 Frikarte3D.stl

Snowflake Mechanical Box Base 106 Frikarte3D.stl

Safely grab the right tool with the Gridfinity modular workshop storage system!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Nipper Holder: https://a360.co/37jchw3
- Stripper Holder: https://a360.co/3Erq2oV

These racks pack tons of hand tools into a small area, positioned so you can safely see and grab the business ends. These work great for nippers, flush cutters, wire strippers, pliers, scissors, crimpers, nibblers, cutters, and punch-down tools.

*These storage blocks are extra-big and tend to curl! Use a brim and ensure good bed adhesion.* 

**Nipper Holder**: Holds six tools about 80mm from handle to handle. If the tool is spring-loaded, the undercut will keep it from falling out. This can be mounted sideways to store five tools.

**Stripper Holder**: Holds two wire strippers or other long, slim hand tools up to 18mm thicc. I've prepared two sizes - 200mm is your usual multi-hole wire stripper, and 160mm fits many crimpers and termination tools. Both should fit on most printers.

**Gridfinity Tips!**
- Use any filament with an 0.6mm or smaller nozzle. 
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

Explore the intricately designed 3D key holder model with a shelf on Thangs.com. Crafted by the expert designer '3dprintanything', this model falls under the 'Devices' category. The key holder serves a dual purpose; providing a convenient spot for your keys and featuring a built-in shelf for added storage.

Detailed visuals of the model can be found in two images, presenting a 360-degree view of the model. The first image is an elegant png picture showcasing the key holder with its shelf. The second image is a jpg picture presenting a different angle, further accentuating the fine details of this model.  

This 3D printed key holder with a shelf offers an organized solution for your keys, ensuring they are always within easy reach. The model showcases a precise design encompassing style, simplicity, and functionality, making it an ideal addition to any home setting. 

Check out this 3D model on Thangs.com under the work of '3dprintanything', depicting creative innovation at its best. Enjoy the blend of an effective key storage solution fused with an additional shelf feature, demonstrating the productive use of 3D printing. Crystal clear images are provided for a better understanding.

The model is perfect for those seeking an extended storage solution that combines purpose and aesthetics. Designed with an eye for detail, this key holder with a shelf, exemplifies the best of 3D modelling. Immerse yourself in the world of 3D print designs at Thangs.com

Key holder with shelf

Gridfinity Hex Bin 1x4 Divided

Hex_Bin_Gridfinity_1x4x4_DIV.stl

**RUGGED DESKTOP ORGANIZER**
Based on the “sturdy and stylish” **small and scalable** Rugged Desktop Organizer Remixed to offer more storage locations for more of your things.  Two parts to offer a nice finished look in multiple, easy to print colors.
#BackToSchool
BackToSchool


Remixed based on the desk organizer: https://cults3d.com/en/3d-model/home/rugged-desktop-organizer


RUGGED DESKTOP ORGANIZER - Full Version

RuggedOrganizer_Full.stl

Explore the unique, functional, and playful Angry Beaver 3D Model on Thangs.com.

Designed as a part of our Functional/Organizer collection, this intricate creation is an ideal desk accessory that conveniently holds your go-to pen or stylus.

The model serves as an amusing desk companion. This Angry Beaver 3D model is perfect for adding humor to your workspace, creating a lively environment while fulfilling your organizer needs.

**Subscribe to the Enraged plan to print out and sell your prints today!**

Do not forget to like the posting and upload your print to the makes area, you can win prizes too!

Get ready to let this feisty beaver take over your desk while providing an organized place for your handy writing tools. Ideal for a quick assembly project or a quirky gift for wildlife enthusiasts, this accurately designed 3D model is a wonderful blend of functionality and charm. Unleash the angry beaver.

Angry Beaver Pen/Stylus Holder

beaver_body_AngryMonday.stl

Pointy boi storage for the Gridfinity modular workshop storage system - saves space and delicate fingies!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Pick Rack: https://a360.co/3JCOrIS
- Chonk Rack: https://a360.co/3xgYhO9
- Tweezer Rack: https://a360.co/3uxC0dd

These racks store long, pointy objects at an angle... but angle the business ends away from pokey fingers.

These are all two-part models. Print an Upper and a Lower and glue 'em together.

- The Pick Rack is perfect for slender tools like picks and files.
- The Chonk Rack is for thiccer tools (hey-o) like scrapers, forceps, and spring tweezers.
-  The Twizzles Rack holds tweezers. I call them twizzles because I think it's funny.

The Twizzles Rack Upper is the only piece that needs support.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.

Gridfinity Pick + Tweezer Racks

Illustration! Don't print!!

Super Mushroom Container 

this model is a multipart design which means that you can print it in multicolor using just your ender 3.

support me; https://www.patreon.com/pressprint

Super Mushroom Container

container bottom white.stl

3D printing accessories for the Gridfinity modular workshop system - store tools, nozzles, and more!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Caddy: https://a360.co/3KzVx2a
- Bottle Holder: https://a360.co/3LVjAsC
- Magigoo Holder: https://a360.co/3KzVEe6
- Nozzle Holder: https://a360.co/3KxGS7y
- Volcano Nozzle Holder: https://a360.co/3JLhKJz
- Revo Nozzlebreak Holder: https://a360.co/3xmVPpk
- Glue Sticc Holder: https://a360.co/3vapCiq

This assortment of 3D printer organizers is perfect for printing what you love to print - accessories for your printer!

**3D Printer Caddy**: Puts emergency supplies within reach! Holds scraper, nippers, tweezers, acupuncture needles, brass brush, adjustable wrench, and nozzle wrench

**Bottle Holder**: Designed to hold Nano Polymer high-temperature bed treatment, but also fits many small spray bottles. Bottles should not shake loose.

**Dual Bulk Nozzle Holder**: Holds eight copies of two different nozzle sizes. Can stack when loaded with E3D or Creality-style nozzles.

**Quad Revo Holder**: Holds four E3D RapidChange Revo nozzle-heatbreak nozzlebreaks. Can stack.

**Triple Volcano Holder**: Holds three extended E3D-style holders, like those included with the Anycubic Vyper and Kobra. Can stack.

**Glue Stick Holder**: Holds multiple sizes of icky sticky horsey bois, particularly Elmer's small and regular, and Kores.

**Magigoo Holder**: Holds four-piece Magigoo bed treatment assortment pack, and should not allow them to jiggle loose.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity 3D Printing Bundle for Nerds

3D Printer Caddy.stl

Pen, pencil, and marker storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Regular Version: https://a360.co/37EP2we
- Chisel Version: https://a360.co/3E49liU
- EXTRA THICCCCCC: https://a360.co/3jqmzx4

These holders were designed to securely store Sharpie markers, but should fit many other brands of markers and other roughly marker-shaped objects. I won't judge, you do you.

These are tall enough to keep the pens from falling out, but securing with magnets or screws is **strongly** recommended!

**Regular version**: Fits standard Sharpie markers and other round, slim objects with a diameter of 12mm or less, like brushes and test tubes.

**Chisel version**: Fits chisel-tip Sharpies, paint pens, and other stuff with a cross-section that fits a 16x22mm ellipse.

**Magnum version**: Fits the girthiest of Sharpies and other extra-thicc 27mm rods. Careful where you point that thing.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Pen, Pencil, and Marker Holders

Sharpie Holder, Chisel.stl

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at  
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file: 
https://a360.co/3KZAXs6

This holder stores a Mitutoyo Absolute Digimatic Series 500 caliper and a pair of SR44 batteries in a bare minimum of desk space. By sticking the caliper straight up, the contoured socket protects the jaws from damage and fits 6", 12", and all sizes.

This block has a high center of gravity, so I strongly recommend mounting it to [a weighted baseplate](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925?manualModelView=true) using magnets or screws!

**Gridfinity Tips!**
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Caliper Holder

Functional

Categories

Trending

Personalize