Jasmine G

90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable

by
pixelandpapier
Follow
Follow
Remix Model
pixelandpapier
pixelandpapier
|
Image 5 of 9
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
pixelandpapier
pixelandpapier
|
Image 5 of 9
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
2D
3D
Makes
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
90s Nostalgia Heart Compact Case – Case is Print in Place, Toy Inspired Design, Customizable 3d model
This model is restricted by licensing terms. 

These adorable heart compacts are a fun throwback to the nostalgic designs we all loved from the 80s and 90s! They're super easy to print with both AMS and non-AMS printers, and you can choose between two versions—one with space to pop in a 2" mirror or one without. Whether you're using it to hold little keepsakes or simply adding a playful touch to your everyday life, this compact is a quick and sweet print that’s sure to bring a smile!

Print Settings -I recommend using a brim to prevent any lifting during the print

  • Supports required. Set Top Z distance slightly higher than your layer height (e.g., for 0.2mm layer height, use 0.22mm) for easier removal
  • 8-10% infill.
  • 2-3 walls
  • 0.4mm nozzle
  • 0.12mm layer height for the top designs, 0.12 - 0.2mm layer height everywhere else
  • Use 3MF file if you want to use your AMS for the colored top

Items Used:

Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.

Assembly Video: https://youtu.be/-8XaRrt9Cyw


12 Likes41 DownloadsOctober 3, 2024


12 Likes41 DownloadsOctober 3, 2024
This model is restricted by licensing terms.