This “Large Helical Heart” has a secret compartment inside! The pieces twist apart into two separate but identical pieces.

Print in different colours to highlight the spiral curves.

See here for video: https://youtu.be/SSzDglASqT4 

Two “Helical Hearts” available:
Large (plain and with hidden compartment): https://social.thangs.com/m/690383 
Small: https://social.thangs.com/m/690164 

The “Large Helical Heart” is 80mm at the widest point, the “Small Helical Heart” is 50mm at the widest point.

Print two copies of the file. In order to preserve a smooth sliding contact surface, print the files on the side as they are oriented. Try raising the model off the bed by 3mm or so and building tree support up to the overhangs.


Large Helical Heart with Secret Compartment

Large Helical Heart with Compartment.stl

Heart suspended in strings artwork.
 Single and dual colour versions available

Print at 0.2mm layer height

If using Bambu Studio make sure your wall generator is set to Arachne. 

See a video here: https://vimeo.com/860773935?share=copy

Heart Strings Artwork

HeartStringsComplete.stl

Dog heart photo frame

Frame.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
_More Stitch Fanart Sculpts on my Patreon :)_
***
***
**If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct**

Be Mine Valentine's Stitch

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***

***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

This “Small Helical Heart” twists apart into two separate but identical pieces. Print in different colours to highlight the spiral curves.

The “Large Helical Heart” has a hidden compartment for rings or contraband.

See here for video: https://youtu.be/SSzDglASqT4 

Large (plain and with hidden compartment): https://social.thangs.com/m/690383 
Small: https://social.thangs.com/m/690164 

The “Large Helical Heart” is 80mm at the widest point, the “Small Helical Heart” is 50mm at the widest point.

Print two copies of the file. In order to preserve a smooth sliding contact surface, print the files on the side as they are oriented. Try raising the model off the bed by 3mm or so and building tree support up to the overhangs.


Small Helical Heart

This “Small Helical Heart” twists apart into two separate but identical pieces. Print in different colours to highlight the spiral curves.

The “Large Helical Heart” has a hidden compartment for rings or contraband.

See here for video: https://youtu.be/SSzDglASqT4 

Two “Helical Hearts” available:
Large (plain and with hidden compartment):
Small:

The “Large Helical Heart” is 80mm at the widest point, the “Small Helical Heart” is 50mm at the widest point.

Print two copies of the file. In order to preserve a smooth sliding contact surface, print the files on the side as they are oriented. Try raising the model off the bed by 3mm or so and building tree support up to the overhangs.


heartbeat ornament

Heart.stl

Imagine your heartbeat rippling outwards and bumping into all the other heartbeats!

This “Heartbeat Vase” is part of a set of three. Models print easily without supports. Inside heights are indicated below.

See here for video: https://youtu.be/vOIxj584jOs 

See here for other sizes in the set:
Small (50mm): https://social.thangs.com/m/697442 
Medium (70mm): https://social.thangs.com/m/697467 
Large (90mm): https://social.thangs.com/m/697493 

See here for similar vases optimized for spiralized printing: https://social.thangs.com/m/711532

Heartbeat Vase (Large)

Imagine your heartbeat rippling outwards and bumping into all the other heartbeats!

This “Heartbeat Vase” is part of a set of three. Models print easily without supports. Inside heights are indicated below.

See here for video: https://youtu.be/vOIxj584jOs 

See here for other sizes in the set:
Small (50mm): https://social.thangs.com/m/697442 
Medium (70mm): https://social.thangs.com/m/697467 
Large (90mm):


Mum Heart Tree 

This is a model that uses organic or tree supports to create the heart's tree.

The settings mean that the supports are securely attached and become part of the model.

Set supports to 'organic' or 'tree'.
Set your support z distance to zero.
Set supports to 'touching buildplate'
Add a raft at least 2 layers thick.

OPTIONAL: Try playing with the branch and threshold angles and branch and tip diameter to change the look of the tree.

Mum Heart Tree

These “Heartbeat Vases” are modifications of the full thickness “Heartbeat Vases” listed below. They are designed to be printed in “vase” or “spiralized” mode to save on time and materials. 

Spiralized printing also results in a much smoother and consistent outer surface making it a great slicing technique to use with multicolour filament.

Measurements in file name indicate approximate inside height.

See here for video of full thickness models: https://youtu.be/vOIxj584jOs 

Download full-thickness models here:
Small (50mm): https://social.thangs.com/m/697442 
Medium (70mm): https://social.thangs.com/m/697467 
Large (90mm): https://social.thangs.com/m/697493


Heartbeat Vases (For Spiralized Printing)

Heartbeat Spiralize Vase 90mm.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-N
***
***Sculpt by @ChelsC423***
An old sculpt from years ago, hope you enjoy!
***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct


Love & Death -Skull Decor

Love&Death-Whole.stl

DROPDEAD HEART SKULL

It’s not easy to fix a broken heart. Model displayed is printed in temperature sensitive colour changing filament.

See here for video: https://youtu.be/nYwyI-LPaII 

This puzzle is part of the family of different “6-Piece Burr Puzzle” configurations. This is a “Level 1” design because one piece needs to be moved (“unlocked”) before you can begin to disassemble the puzzle. Taking it apart is tricky, but putting it back together is much harder!

Can’t figure out how to fit the pieces fit together? 
See here for an instructional model: https://social.thangs.com/m/617380 
And here for an instructional video: https://youtu.be/UcFXx5P6eX4

Similar puzzles:
Ripple Ball Burr Puzzle: https://social.thangs.com/m/617381
Valentine’s Heart Puzzle: https://social.thangs.com/m/639563 


Anatomical Heart Puzzle

Display only do not post.stl

Added a cute Valentine's Day message. Remix of  Bear for valentine - Carrying heart by Oddity3d

I printed this in place with no supports, however, little supports could be used under the paws.

I Love You Beary Much - Valentine Bear

 Bear for valentine - Carrying heart

The ventricles in this full-sized anatomically correct human heart are large enough to hold a nice selection of chocolates. For your weirdo Valentine. Or cardiologist. The model can be used again for Halloween.

See here for video: https://youtu.be/k8YbW3daSc0 

There are four versions provided: “Plain,” “Magnet,” “Supports,” and “Support Magnet”. Each version includes a “Lid” and “Base”

In the “Plain” version, the Lid is held loosely in place with the overlap of the atria around the ventricles. If you want the lid held more securely, print one of the “Magnet” versions and insert four 3mmx3mm (1/8” x 1/8”) cylindrical neodymium magnets into the two holes in the Lid and Base.

The “Supports” versions are pre-supported on the inner overhangs that are not reachable from the build plate. You will still need to add supports to the bottom.

Print both files as oriented. The “Base” prints in normal orientation, but the lid needs to print upside down to preserve the smoothness of the contact area and ensure that the lid fits nicely on the base. 

I recommend raising the Lid off the surface of the build plate by 3mm and building tree supports underneath. This means that you will need to do a bit of cleanup on what will become top of the lid.


Open Heart Chocolate Box

Display only do not print.stl

You puzzle me. Also I love you. Secret compartments inside for candy or love notes.

See here for video: https://youtu.be/y3Zoqu1biZg 

This puzzle is part of the family of different “6-Piece Burr Puzzle” configurations. This is a “Level 1” design because one piece needs to be moved (“unlocked”) before you can begin to disassemble the puzzle. Taking it apart is tricky, but putting it back together is much harder!

Can’t figure out how to fit the pieces fit together? 
See here for an instructional model: https://social.thangs.com/m/617380 
And here for an instructional video: https://youtu.be/UcFXx5P6eX4

Similar puzzles:
Ripple Ball Burr Puzzle: https://social.thangs.com/m/617381


Valentine’s Heart Puzzle

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***

***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct



Koopa Love

KoopaLove_Alone.stl

-heart, print in place (no supports nedd)
-corazon simple, no necesita soportes

Simple heart - Corazon

Four part heart puzzle box.
Comes in two sizes

Print the lid with supports touching buildplate.

You can create the colored hearts using a filament swap.

See how it works here: https://vimeo.com/871683469?share=copy

Heart Puzzle Box

DISPLAY ONLY.stl

**Please Download and Give a Like!**

**v2** of Print in place hinged Remix of Simple Heart Box with Lid by 3dprintbunny for the Thangs Valentine’s Day Contest !  Printed in Tricolor PLA on a CR-10.

v2 of Print in Place Remix of Simple Heart Box

PIP Heart Box v2.STL

Here's my entry for the "Thangs Valentine's Day Contest" ☺️

I decided to create a simple but yet elegant heart shaped print-in-place box ❤️

⸻⸻⸻⸻⸻⸻⸻⸻

**No supports needed.**

Size: 7 x 12,9 x 2 cm (X, Y, Z)

⸻⸻⸻⸻⸻⸻⸻⸻

**_Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @randomizy.3d [FB / IG] ; @randomizy3d [Twitter / Tik Tok] so that I can see it!)_**
⸻⸻⸻⸻⸻⸻⸻⸻

**_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and models, and you're interested in having a commercial license for selling your physical printouts of my designs (not files), please consider visit my Patreon page here:_** https://www.patreon.com/RandomizY

⸻⸻⸻⸻⸻⸻⸻⸻

Remix of Simple Heart Box with Lid by 3dprintbunny

heart

Most Popular of All Time

Categories

Popular

Personalize

Trending