These small and large heart layered fidgets print in place and are very satisfying to play with💕

Dimensions of Small Heart Layer Fidget: 2 ⅜ in. X 2 ⅜ in. X ⅞ in. Dimensions of Large Heart Layered Fidget: 4 in x 4 in x ⅞ in

Update 1/16/2025: I added keychain versions of this fidget in 2 sizes. I also included a 3mf file for them. Dimensions of the larger keychain: 2.25 in. x 2.25 in. x 7/8 in. Dimensions of the smaller keychain: 1.75 in. x 1.5 in. x 5/5 in.

3D Print Settings: 0.2mm Layer Height PLA works great 15% Infill Supports under the 'ring' of the keychain on the keychain models

Note: The layers of this print are thin, so to ensure a nice first layer, I recommend the following:

• make sure your print plate is clean
• use a smooth print plate
• use a little glue stick on the print plate
• slow the print down for the first couple layers (if I ever have any trouble with first layer adhesion on a print like this, slowing it down usually does the trick 😊)

Have fun printing!!