Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at  
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source file: https://a360.co/3vbu9B5

These are perfect for storing small parts and long, thin objects like needle files, and you can stack them as high as you want! The inner surface has a generous scoop to make retrieving parts easy, and the tab fits 12mm label-maker tape.

I've provided a selection of different sizes and divider counts, to give you OPTIONS! Note that none of the compartment sizes overlap - there isn't a two-compartment 4x1 bin because you can just use two one-compartment 2x1 bins.

Dimensions in file names are Width x Depth x Height. Width and Depth units are 42mm grid slots, Height is in 7mm units. A Prusa i3 Mk3S can fit a five-unit-wide bin on its plate.

Note that two-unit-high bins don't have labels - they would cut too far into the usable storage area.

Brims and support are not required, and these can be printed in any filament with an 0.6mm or smaller nozzle. Wider bins can curl, so maximize your bed adhesion if you're going big!

**Gridfinity Tips!**
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity Divider Bins

Divider Box 2x1x6 5-Compartment.stl

CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Parametric source files: 
- Jewel Case: https://a360.co/3Jw4Bnd
- Bulk Holder: https://a360.co/37IQCgV
- Tubes: https://a360.co/3rFWH4X

These holders securely store CNC tools, drill bits, and other things with 1/8", 1/4", and 3mm shanks.

The 1/8" and 1/4" Bulk versions hold up to 77 and 21 bits, respectively. These point the bits straight up, so you can't stack on top! Be careful not to hurt yourself!

The Tube version holds 12 bits in their protective packages. You can stack other blocks on top of this.

The Jewel Insert version holds four detachable sleeves from snap-together jewel case packaging. These usually hold 10 bits. You can stack other blocks on top of this.

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners. 

Gridfinity CNC Tool Holders

CNC Tool Holder, Tubes.stl

Got a random ball 'o jumpers? Join the club. This can hold all of them. ALL OF THEM.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at 
Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Print a pair of bases and at least two combs, shove the combs in the slots, stretch the jumpers, and you're gucci. You can put multiple combs on the same base to hold multiple sizes! Wowzers!

These DEFINITELY need screws or magnets, like these: https://amzn.to/3ArhyOn

You'll probably need some jumper wires, too: https://amzn.to/3QZy4Lk

**Gridfinity Tips!**
- No brims or support required! 
- Use any filament with an 0.6mm or smaller nozzle. 
- Wider bins can curl, so maximize your bed adhesion!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners!

Gridfinity Adjustable Jumper Wire Comb

Adjustable Jumper Rack Comb.stl

Please "like" this thing to help it rise in the search results, especially if you download it or add it to a collection.

It's a threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans.

The whole egg measures 63mm tall by 45mm wide. I will soon add large and extra large versions.

This is a remix of my own threaded Easter egg. I made every bit of this from scratch, including the scales. I made the scales by importing a custom texture into a Blender brush and placing every scale one at a time, adjusting the size as I went. I designed it with Sketchup, Blender, and Meshmixer. (And Gimp for the scale alpha.)

If you like this design and want to show your support, you can share your make, leave a review, or buy me a coffee (via [Paypal](https://www.paypal.me/tonyyoungblood), [Venmo](https://www.venmo.com/u/Tony-Youngblood), or [CashApp](https://cash.app/$TonySYoungblood)). I appreciate 
you.

Instructions:

1. Print the bottom and top pieces as oriented in the files. Supports are not required. I recommend a layer height of 0.2mm or smaller, wall thickness of 1.2mm, a bottom thickness of 0.6mm, and a top thickness of 0.8mm. Infill density of 12 percent or higher. I tried to allow for horizontal expansion in the design, so first try printing it without adjusting horizontal expansion, slicing tolerance,  or x/y compensation. If it prints too tight or too loose, then you can use one of those slicing features to compensate. Threads are notorious for being the hardest item to print, so please be patient. If you want to save time while testing, you can print the included calibration test instead of the full model. 
2. Once printed, screw the threads in and out repeatedly to remove any stray particles. It may feel too tight on the first threading but should screw easily after ten seconds of doing this.    
3. Note the small nubs near the threads. Refer to the pictures to see what I'm talking about.  When the two nubs are parallel, you know you've got the proper alignment.

Licensed under Creative Commons Attribution Share Alike. If you sell prints of this file, please respect the license and credit me on the sales page with a link to this page.

Threaded Dragon Egg, Great for Easter and Gifts

DragonEggStandardBottom.stl

A slightly improved version of the gridfinity frame to remove boxes rocking

Gridfinity slightly improved frame (no rocking)

3x4 Frame.3mf

This item is for use with the #GridFinity system by Zach Freedman:

[https://www.youtube.com/watch?v=ra_9zU-mnl8](https://www.youtube.com/watch?v=ra_9zU-mnl8)

**UPDATE:**
Taking Zack's suggestion from his latest Gridfinity video, I have added a version (see attached Spacers 2.0.f3d) that not only adds a provision for keeping the magnet mounts in the corners but is also fully parametric up to 8x8. Thanks to KptnAutismus on github for the updated templates.


This is a collection of height adapting spacers for the Gridfinity system. You might ask "Why the heck would I ever need this?". The answer is relatively simple, while Gridfinity does an excellent job of maximizing your XY Axis storage space, you may want items at the back to sit at a higher level for accessibility, or maybe you want to stack something on top of two modules in your system but they are of different heights. My spacers will open up the world of the Z axis to your Gridfinity layout.

Sizes available are 1/4 (250), 1/2 (500) and 3/4 (750). Layouts available are:

1x1
1x2
1x3
1x4

2x2
2x3
2x4

3x3
3x3

4x4

Try it out today, spacers can go above or before your modules and consist of the outer perimeters of the Storage bin template.

Comment below if you need a custom size or height!

#Gridfinity Height Adaptive Spacers

2x2x025.stl

**This is a 1x1 Gridfinity module for 14 Hex bits**

Gridfinity system by** Zach Freedman**

please visit my Youtube Channel [https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER) :-)


Gridfinity 1x1x1 Hex bit holder x14.stl

This item is for use with the #GridFinity system by Zach Freedman:

[https://www.youtube.com/watch?v=ra_9zU-mnl8](https://www.youtube.com/watch?v=ra_9zU-mnl8)

Hey There! Another #Gridfinity add-on! These parametric lids can be sized to any configuration you desire. Simply enter the slotsWide and slotsDeep numbers and like magic you have a lid for any basket or bin or whatever. 

A selection of common sizes in STL format included.

These should be printed with the top of the lid flat on the bed.

#Gridfinity Parametric Lids

2x2.stl

A gridfinity compatible AA battery holder. Holds 9 AAA batteries. C̶a̶n̶'̶t̶ ̶b̶e̶ ̶s̶t̶a̶c̶k̶e̶d̶. 1x1 [x1/2]. Based on Zack Freedman's gridfinity storage https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba

Edit : Now stackable while empty or with the help of bigbrisco's spacers when filled! https://social.thangs.com/m/61820

Gridfinity compatible 1x1 9xAAA battery holder.stl

A gridfinity compatible AA battery holder. Holds 9 AAA batteries. Can't be stacked. 1x1. Based on Zack Freedman's gridfinity storage https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba

Gridfinity compatible 1x1 9xAAA battery holder v1.stl

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for 2x2 bins:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: https://social.thangs.com/m/714105 



Chain Link Gridfinity Bin 40mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm:
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:



this is a 5x1 **Gridfinity** compatible wall mounted base so that you can add **Gridfinity** modules to your tool wall.

Designed by Me - [please visit my YouTube Channel ](https://www.youtube.com/c/DIYTINKERER)

The Gridfinity concept was originally designed by **Zach Freedman**


Gridfinity 4x1 Wall Mount Base.stl

Lids for gridfinity boxes so they are easier to transport without the content mixing or falling out.

I found my self often in the situation where I needed to take a few of my gridfinity screw boxes with me. I prefer that the screws stays in the boxes and do not mix or fall out. Apparantly there was no good models for this on thangs or anywhere else. So here is a collection of lids.

Features:
-Screws and other stuff stays in their compartments
-Use as little material as possible while doing it's job
-fits snuggly on top on boxes. (tolerances change depending on the printer)

I still recoment to use a rubberband or similar to hold the lid in place.

Gridfinity Lids

Gridfinity Lid 1x3.stl

Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!

**Includes Bambu Studio single and 2 color .3mf files.**

Rugged Organizer LARGE Gridfinity 2x3

Rugged_Organizer_LG_Gridfinity2x3.stl

**_New Version!!_**
The place that the tire weights sit has been removed to allow for a lower printing time. (They were not useful anyway)

**_LEDs_**
There are now holes for LEDs on each of the two slots so that you can have RGB or the search function (just need to add a reed switch to the bottom) 

_**Holes**_
The Holes have been changed so that they are now a inch apart and 1/4" in diameter so that it can be used on a pegboard.

So you want to stack up? but all Zack will give you is stacking on a flat surface because he doesn't want your parts falling out? well fear no more as you can stack Gridfinity along your walls now along with your desk! got a wall with nothing on it? cover it in the Wall Stack-able Gridfinity bases and fill it with all sorts of different bins for all your parts needs! supports up to 6 unit tall blocks with a maximum depth of 1 unit, it can be as long as you want though! 

I AM NOT LIABLE FOR YOUR STUFF FALLING ON TO YOUR TABLE  

Thanks to Zack Freedman for the Gridfinity system! 


The Stackable Wall Mountable Gridfinity base!

So you want to stack up? but all Zack will give you is stacking on a flat surface because he doesn't want your parts falling out? well fear no more as you can stack Gridfinity along your walls now along with your desk! got a wall with nothing on it? cover it in the Wall Stack-able Gridfinity bases and fill it with all sorts of different bins for all your parts needs! supports up to 6 unit tall blocks with a maximum depth of 1 unit, it can be as long as you want though! 

I AM NOT LIABLE FOR YOUR STUFF FALLING ON TO YOUR TABLE  

Thanks to Zack Freedman for the Gridfinity system! 

(I will put up pictures of it tomorrow when i print it)

This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project:

https://www.youtube.com/watch?v=ra_9zU-mnl8

This version is customizable in CadQuery so you can generate custom sized divided boxes, including ridiculously large ones like 10x10 boxes etc. I have included a random selection of grid sizes from 1x1x2-high up. These should be fully compatible with the official boxes/grids. You can also fully customize the X Y and Z unit sizes AND the number of dividers on X and Y separately!

I re-implemented this because it seems like a perfect fit for an open source CAD software like CadQuery. With that in mind I have also released the source code python script that was used to generate the STLs. I would love for others to help me create new organizer bins and/or re-implement organizer bins in open source CAD software like CadQuery or OpenSCAD.

I used CadQuery/CQ-Editor to design this with a recent version checked out from github on April 13th, 2022. Unfortunately CadHub.xyz does not have a recent enough version of CadQuery to render this properly (n.b. the issue is with lack of a combine argument in the older version of the eachpoint method).

CQ-Editor is available from here, but please check out a 0.30dev version or newer to be able to compile the included CadQuery source code:
https://github.com/CadQuery/CQ-editor

f you are interested also check out all of my gridfinity models for baseplates and boxes here:
https://www.printables.com/social/107343-jdegs/collections/154274

And my related model for undivided gridfinity boxes here:
https://www.printables.com/model/174715-basic-undivided-gridfinity-boxes-cadquery-customiz

Source Code is available here since Thangs doesn't allow CadQuery python files:
https://www.printables.com/model/179040-divided-gridfinity-boxes-cadquery-customizable

REVISION HISTORY:

220427: Revision #1
- Fixed issue where the bottom thickness of the box was only 1.0mm above the top of the magnet/bolt holes, but was intended to be 2.0mm. Re-rendered all models and released revised python source code.

Divided Gridfinity Boxes (CadQuery Customizable)

divided box 1x4x3-hi and 1x3-divs.stl

Cat container, print without supports
This model is for personal use only, if you want to sell physical prints of my designs, or you want to support me, please check out my patreon at: https://www.patreon.com/pressprint.

Happy printing ❤️

Cat container

Body1.stl

this is a cute bear with a hole in his belly for storing your shiny little things, or if you went bigger you can use it for candy.

this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint

and if you are a bambulab user you can find the pre-painted 3mf files [here](https://thangs.com/mythangs/file/933538)

bear belly storage

this is a cute bear with a hole in his belly for storing your shiny little things, or if you went bigger you can use it for candy.

this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint

and if you are a bambulab user you can find the pre-painted 3mf files here

A 1x3x3 flip-top, snap-held container based upon the Gridfinity framework developed by Zack Freedman.

Suggest standard printing profiles with no supports for the bottom piece, and to print the top piece vertically with the fat part on the bottom, using minimal supports under the fat part.



Gridfinity Flip-Top Container

FlipUp_Container_Bottom.stl

This Yarn Bowl features a thick regular knit pattern on the sides and bottom. Use it to keep your ball of yarn from running away!

See here for video: https://youtu.be/N_JygGQk8I0 

When printing, you will need to set up supports for the top and bottom of the front swirl-shaped piece. Tree supports work well. You will not need supports elsewhere, but you might get small areas of print fail in some of the unavoidable overhangs within the knit geometry. These can be removed easily with a file if you wish.


Yarn Bowl

An extra thin version of the minimal base plate*. Uses about half the filament as the standard 4x4 baseplate. Smooth underside.

If you want other sizes (eg 5x3, 2x4) use the .f3d file in Fusion 360 to change the rectangular pattern. Or maybe message and ask me nicely :) 

*Minimal base plate =  What you get when bare gridfinity frames meet magnet baseplate.


Thinner Minimal Baseplate 4x4.stl

An extra thin version of the minimal base plate*. Smooth underside.

*Minimal base plate =  What you get when bare gridfinity frames meet magnet baseplate.

storage

Most Popular of All Time

Categories

Popular

Personalize

Trending