tracking pixel
Paul B

Fold-a-Ball LIGHT - A foldable ball that fits in your pocket

by
logicalplanet
Follow
Follow
Remix Model
logicalplanet
logicalplanet
|
Image 2 of 7
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
logicalplanet
logicalplanet
|
Image 2 of 7
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
2D
3D
Makes
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
Fold-a-Ball LIGHT - A foldable ball that fits in your pocket 3d model
This model is restricted by licensing terms. 

This is a LIGHT version of 2.5" fold-a-ball. It has one less inner core making the entire ball lighter and possibly better suited to some applications. I am thinking of cat for example.

The ball folds up and fits in your pocket. It is a tennis ball-sized folding ball suitable for light play.

This is a print-in-place 1-piece ball that folds (not collapses) into a 12mm thick disc. It can be deployed and collapsed quickly and easily.

Please note that if you want a more durable ball, see my other version... https://than.gs/m/1172663

Your material selection and slicer settings will determine how durable and strong the printed ball is. If you are printing it for a cat, for example, PLA would probably be fine. Regardless of material, you will need to print with a minimum of four wall and 100% infill.

100% printed - no hardware, fasteners, or adhesives required. No support is required.

Free for a limited time. Please collect it, like it and download it now to help support me in the league competitions. Thank you.

Print Settings:

Material = I recommend PETG but any material should work.

Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Top and Bottom Layer Count = 5 Infill = 100% Ironing = Not required, but can be enabled to improve layer separation after printing Brim = No Support = No

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

See my blog for more details and other product info… https://www.logicalplanet.com/


8 Likes22 DownloadsNovember 12, 2024


8 Likes22 DownloadsNovember 12, 2024
This model is restricted by licensing terms.