Connectors between the main plates

This design is intended for the connections between the panels. An example is given under Instructions. This will help you. If you have any further questions, please feel free to contact us at any time

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

For support, you are welcome to contact us at any time. Please read our Instructions and Important information!