caps for vallejo and army painter paint bottle caps for testing your contrast and speed paints. They fit on vallejo and AP caps, but if you're a little worried, just up the size by 1 or 2 percent and it will work. 

I print on my mars 2 in abs like resin. 

Paint bottle cap toppers

paving stones topper supported.stl

Gridfinity Tool Box Base is a 3D printable model that lets you organize your tools and gadgets more efficiently and securely. This base is a remix of the Tool Box Base by Yanev, but with Gridfinity frames that will help you to organize your tools, parts,...

Gridfinity Tool Box Base is compatible with all the tool boxes designed by Frikarte3D, such as the Guardians of the Galaxy Tool Box, Guardians of the Galaxy Vol. 3 Tool Box, Ahsoka Tano Tool Box, Hydra Tool Box, SHIELD Tool Box, Umbrella Corporation Tool Box, Lego Sorter Box, Creality Box, Polymaker Filament Swatch Box and the new ones I will release soon. You can mix and match them to create your own customized tool box.

Gridfinity Tool Box Base is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like.

Gridfinity Tool Box Base is based on the [ZackFreedman](https://thangs.com/designer/ZackFreedman) [Gridfinity Base Plates](https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Baseplates-60925), which are modular and magnetic plates that let you create your own storage system. You can choose between two versions of the base: one with a simple frame and another with a weighted frame that uses 6x2mm magnets to keep the block from moving. You don’t need to install every magnet, foot, and weight! Just use enough for your needs.

Gridfinity Tool Box Base follows the same Gridfinity Tips that [ZackFreedman](https://thangs.com/designer/ZackFreedman) added to his model, except for the use of M3 screws for a permanent secure lock. Here are the tips:
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider base can curl, so maximize your bed adhesion if you’re going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won’t magnetize the contents.

Download Gridfinity Tool Box Base today and enjoy this practical and versatile tool box base!

This is a REMIX and is protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without original designer explicit written consent.

To sell them legally, message the designer.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Gridfinity Tool Box Base

Tool Box Base Gridfinity Magnet 4x4 Frikarte3D.stl

The Gridfinity system by https://thangs.com/designer/ZackFreedman is pretty cool and all, but one thing I haven't found (on like the first page of stuff because I have the attention span of a goldfish) is a base system for it that is modular.  I've seen parametric bases, but not fully modular ones.

So, well, here it is.  The connectors for the base modules might be a touch finicky to print because of the very small detail so be sure to keep that in mind. I put the clearance at 0.2mm because that's what I've found generally makes for an ok interference fit on my printers.

Each base piece is one unit in every dimension, including z (42x42x7) to make life simple for everyone.  The test pieces I printed snapped together very nicely after I cleaned up some imperfections from the prints.  I printed them in Inland PETG+ at 0.2mm layer height.

Update:

First version had incorrect corner radius on the base plate.  This has been updated so that it now has the correct corner radius.  There was no change to the connectors so those should still work, but if you printed V1 base you'll need to reprint with this update to be able to use with other Gridfinity modules.

Gridfinity Modular Base System

GridfinityModularBase1U.stl

Introducing the Tool Box Base Large, a 3D printable model that lets you organize your tools and gadgets more efficiently and now with a bigger size. This base is a remix of the Tool Box Base by Yanev, but with a taller base. This way, you can store more things inside.

The Tool Box Base Large is compatible with all the tool boxes designed by Frikarte3D, such as the [Guardians of the Galaxy Tool Box](https://than.gs/m/845236), [Guardians of the Galaxy Vol. 3 Tool Box](https://than.gs/m/854205), [Ahsoka Tano Tool Box](https://than.gs/m/834348), [Hydra Tool Box](https://than.gs/m/842352), [SHIELD Tool Box](https://than.gs/m/841146), [Umbrella Corporation Tool Box](https://than.gs/m/837130), [Lego Sorter Box](https://than.gs/m/904957), [Creality Box](https://than.gs/m/904962), [Polymaker Filament Swatch Box](https://than.gs/m/905325) and the new ones I will release soon. You can mix and match them to create your own customized tool box.

The Tool Box Base Large is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. 

Download the Tool Box Base Large today and enjoy this practical and versatile tool box base!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Tool Box Base Large

Introducing the Tool Box Base for 30 Filament Swatch and 2 Comparments in the Back, a 3D printable model that lets you organize your filament samples. This base is a remix of the Tool Box Base by Yanev, but with a wall added to create slots for a 60 filament swatches. This way you can transport them and have organized to show anyone. The swatches used to test this base are the ones contained here: [Filament Swatch Library](https://www.printables.com/model/111326-filament-swatch-library/files).

Tool Box Base for 30 Filament Swatch and 2 Comparments in the Back is compatible with all the tool boxes designed by Frikarte3D, such as the [Guardians of the Galaxy Tool Box](https://than.gs/m/845236), [Guardians of the Galaxy Vol. 3 Tool Box](https://than.gs/m/854205), [Ahsoka Tano Tool Box](https://than.gs/m/834348), [Hydra Tool Box](https://than.gs/m/842352), [SHIELD Tool Box](https://than.gs/m/841146), [Umbrella Corporation Tool Box](https://than.gs/m/837130), [Lego Sorter Box](https://than.gs/m/904957), [Creality Box](https://than.gs/m/904962), [Polymaker Filament Swatch Box](https://than.gs/m/905325) and the new ones I will release soon. You can mix and match them to create your own customized tool box.

Tool Box Base for 30 Filament Swatch and 2 Comparments in the Back is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. 

Download the Tool Box Base for 30 Filament Swatch and 2 Comparments in the Back today and enjoy this practical and versatile tool box base!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Tool Box Base for 30 Filament Swatch and 2 Comparments in the Back

Introducing the Tool Box Base Large with Compartments, a 3D printable model that lets you organize your tools and gadgets more efficiently and now bigger. This base is a remix of the Tool Box Base by Yanev, but with a wall added to create nine compartments inside the box. This way, you can separate your tools by size, type, or function and keep them neat and tidy.

The Tool Box Base with Compartments is compatible with all the tool boxes designed by Frikarte3D, such as the [Guardians of the Galaxy Tool Box](https://than.gs/m/845236), [Guardians of the Galaxy Vol. 3 Tool Box](https://than.gs/m/854205), [Ahsoka Tano Tool Box](https://than.gs/m/834348), [Hydra Tool Box](https://than.gs/m/842352), [SHIELD Tool Box](https://than.gs/m/841146), [Umbrella Corporation Tool Box](https://than.gs/m/837130), [Lego Sorter Box](https://than.gs/m/904957), [Creality Box](https://than.gs/m/904962), [Polymaker Filament Swatch Box](https://than.gs/m/905325) and the new ones I will release soon. You can mix and match them to create your own customized tool box.

The Tool Box Base Large with Compartments is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. 

Download the Tool Box Base Large with Compartments today and enjoy this practical and versatile tool box base!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Tool Box Base Large - 2 Vertical Compartments

Introducing the Tool Box Base Medium with Divider, a 3D printable model that lets you organize your tools and gadgets more efficiently and now bigger. This base is a remix of the Tool Box Base by Yanev, but with a wall added to create nine compartments inside the box. This way, you can separate your tools by size, type, or function and keep them neat and tidy.

The Tool Box Base with Divider is compatible with all the tool boxes designed by Frikarte3D, such as the [Guardians of the Galaxy Tool Box](https://than.gs/m/845236), [Guardians of the Galaxy Vol. 3 Tool Box](https://than.gs/m/854205), [Ahsoka Tano Tool Box](https://than.gs/m/834348), [Hydra Tool Box](https://than.gs/m/842352), [SHIELD Tool Box](https://than.gs/m/841146), [Umbrella Corporation Tool Box](https://than.gs/m/837130), [Lego Sorter Box](https://than.gs/m/904957), [Creality Box](https://than.gs/m/904962), [Polymaker Filament Swatch Box](https://than.gs/m/905325) and the new ones I will release soon. You can mix and match them to create your own customized tool box.

The Tool Box Base Medium with Divider is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. 

Download the Tool Box Base Medium with Divider today and enjoy this practical and versatile tool box base!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Tool Box Base Medium with Divider 9 Compartments

Tool Box Base Large - 3 Vertical Compartments

Tool Box Base Medium with Divider 6 Vertical Compartments

TERMS OF USE:

✅Personal Use is OK.
✅Commercial Use is OK.

❌Do not claim this work as your own.

FOR WEB:

You must link back to 👉🏼 piazzestudio

FOR PRINT: 

✅Personal Use is OK. 
✅For Commercial / Promotional use you must include:

The link to 👉🏼 piazzestudio on any product pages online.

✅If you sell this product personally you must put also the credit of the creator.

Copyright remains with me.

My designs are ideals for gifts, home decoration, events plans, partys, weddings, etc.

I hope you enjoy my Work.

Flower Vase LOW POLY

Hello Tribe,

I am learning on how to make interesting model stands here is a more complex version of the hill top

Cheers
Maker Millwright

FHW: Model stand hilltop Imperial 1

Two new buildings (Orbital Plasma Artillery and a Communications Center) along with six textured hex bases for your mechs (Rocks, Cratered Moon, Hills, Crystal Landscape, Alien World, and Dropship Deck). All models come in supported and unsupported varieties.

nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities. These 3d models were created by former nonPareil Institute students and staff members who help other adults on the autism spectrum explore their technical passions and skills.

Some models created through use of Standard License with Oleg Ushenok.

One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These photographs may not be redistributed by default; please visit www.textures.com for more information.

Battletech Buildings and Bases - pack 2

Communications_Center.stl

BASE FOR SCULPTURE MULTICOLOR 

Hello Tribe,

Just making some bases for miniatures this is a 32mm base please enjoy

Cheers
Maker Millwright

FHW_ Model model base (32mm) 1

FHW_ Model model base (32mm) 1.stl

FHW: Model model base (32mm) 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6010987.

Made a model stand for my dad for his iron man POP figure or whatever those are, but it could work for other models.

the peg is about 3mm wide, i made mine out of a metal rod actually but you can either print this one or make one yourself in that same shape and angle and it should work great, just make sure to print it pretty solid otherwise your model may break it off due to layer line direction etc.

base is 3 inches long

Model Stand for miniatures or pop figures etc

model_stand.stl

The Gridfinity system by https://thangs.com/designer/ZackFreedman is pretty cool and all, but one thing I haven't found (on like the first page of stuff because I have the attention span of a goldfish) is a base system for it that is modular.  I've seen parametric bases, but not fully modular ones.

I had created a version already, but I had intentionally avoided overhangs with that which made the connectors a bit tough to print.  Now the challenge in this one is just a little bit of overhang.  Personally I like this one better.  I found my first attempt at the connector a bit loose with my normal tolerances so I made one with tighter tolerances.  Use whichever one gives you a nice fit.  

I removed most of the outer corner radius on these to make them a little more aesthetically pleasing (to me) when they are put together.  There is an indentation to place a small magnet in (15mm dia, 2mm tall) if you want to have magnets to help hold your stuff in place. 

The main one I am going to be using is the "low profile" version which is technically only Gridfinity compatible because it trims a couple mm off the top for a quicker print with a tiny amount less material used.  I also included the model with the full indentation size if you want to use that.

Low-Profile Gridfinity Modular Base (Overhang)

GridfinityLowProfileModularBase.stl

This is a base model to sculpt or Paint a character like my[ Dangly-leg abominable snowman](https://thangs.com/mythangs/file/970092).

SCALE UP TO PRINT:  I designed this at the minimum reasonable size to have the parts print and wiggle freely, But I recommend scaling him up 200%.

My intention was mainly to share this with other artists, but the more I look at it, and after playing with some of my dangly test prints, I think it'll be a fun project to print and paint as well.  Heck, just print him, look at him standing there alone and dejected.

The Zip file contains a zBrush zTool file. My recommended route, but you could certainly print this out as is, as a painting project.

I'll be updating this a little over the weekend based on feedback from some friends tonight.

Dangly Leg Ornament Base

danglyLegOrnamentBase_harperCrafthall.3mf

A simple stand that makes it easier to set your [Insta360 X3](https://bit.ly/InstaX3) down. Great while charging and transferring files, or even while filming!

 

For added protection, check out the [Insta360 X3 BestCase](https://www.myminifactory.com/object/3d-print-271160)

 

Photographed model was printed with Polymaker PolyTerra Matte Forest Green PLA, available from [Polymaker](https://bit.ly/TerraGr)(US) and [Amazon](https://amzn.to/3WL0Qku). Use your standard print settings.

Insta 360 X3 Charging Stand

A simple stand that makes it easier to set your [Insta360 X3](https://bit.ly/InstaX3) down. Great while charging and transferring files, or even while filming!

 

For added protection, check out the [Insta360 X3 BestCase](https://www.myminifactory.com/object/3d-print-271160)

 

Photographed model was printed with Polymaker PolyTerra Matte Forest Green PLA, available from [Polymaker](https://bit.ly/TerraGr)(US) and [Amazon](https://amzn.to/3WL0Qku)

**Hello Tribe**

A base for for the new cannons for Beacon of Doom 62mmx62mmx3
PLease enjoy

Cheers
Maker Millwright

base

Most Popular of All Time

Categories

Popular

Personalize

Trending