This box has length x width x height : 120 mm x 120 mm x 90 mm

This box has length x width x height : 4,72 inches x 4,72 inches x 3,54 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Round organizer 120 x 120 x 90

Round organizer 120 x 120 x 90.stl

This box has length x width x height : 120 mm x 120 mm x 60 mm

This box has length x width x height : 4,72 inches x 4,72 inches x 2,36 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Round organizer 120 x 120 x 60

round organizer 120 x 120 x 60.stl

This box has length x width x height : 90 mm x 90 mm x 90 mm

This box has length x width x height : 3,54inches x 3,54 inches x 3,54 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Round organizer 90 x 90 x 90

Round organizer 90 x 90 x 90.stl

This box has length x width x height : 90 mm x 90 mm x 60 mm

This box has length x width x height : 3,54inches x 3,54 inches x 32,36 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Round Organizer 90 x 90 x 60

round organizer 90 x 90 x 60.stl

This box has length x width x height : 50 mm x 50 mm x 90 mm

This box has length x width x height : 1,97 inches x 1,97inches x 3,54 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Round organizer 50 x 50 x 90

round organiser 50 x 50 x 90.stl

This box has length x width x height : 50 mm x 50 mm x 60 mm

This box has length x width x height : 1,97 inches x 1,97inches x 2,36 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Round Organizer 50 x 50 x60

round organizer 50 x 50 x 60.stl

This box has length x width x height : 180 mm x 150 mm x 20 mm
This box has length x width x height : 7,09 inches x 5,91 inches x 0,79 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!
------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support
-----------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Organizer flat tray 180 x 150 x 20

Box 180 x 150 x 20.stl

This box has length x width x height : 180 mm x 100 mm x 10 mm
This box has length x width x height : 7,09 inches x 3,94 inches x 0,39 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!
------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support
------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Organizer flat tray 180 x 100 x 10

Wall box 180 x 100 x10.stl

This box has length x width x height : 150 mm x 50 mm x 10 mm
This box has length x width x height : 5,91 inches x 1,97 inches x 0,39 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!
------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support
------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Organizer flat tray 150 x 50 x 10

Wall box 150 x 50 x 10.stl

This box has length x width x height : 120 mm x 100 mm x 90 mm
This box has length x width x height : 4,72 inches x 3,94 inches x 3,54 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!
------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support
------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Organizer / Box 120 x 100 x 90

Box 120 x 100 x 90.stl

This box has length x width x height : 90 mm x 90 mm x 70 mm
This box has length x width x height : 3,54 inches x 3,54 inches x 2,75 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use
------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Box / Organizer 90 x 90 x 70

Wall box 90 x 90 x 70.stl

This box has length x width x height : 90 mm x 50 mm x 10 mm
This box has length x width x height : 3,54 inches x 1,96 inches x 0,04 inches

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Organizer flat tray 90 x 50 x 10

Wall box 90 x 50x 10.stl

This box has length x width x height : 60 mm x 50 mm x 35 mm

This box has length x width x height : 2,36 inches x 1,96 inches x 1,37 inches

------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

------------------------------

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!

Box / Organizer 60 x 50 x 35

Wall box 60 x 50 x35.stl

Our design should not only be functional but also visually beautiful. That's why we designed this frame.

A simple example from us. For our example, we used 4 screws for wall mounting because we are not putting anything heavy up.

If you need more wall mounts, we have designed a frame for that too. So don't worry :) If you need anything else, just let us know!
------------------------------

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.
------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information!

Frames

Frame corners - top left and bottom right.stl

This is one of the most important parts. Your design goes on the wall. Since we don't know what you want to use the design for, we recommend that you attach it well to the wall.

At the end, please ensure good strength and test the design with a test to see if everything is stable!

We have created 4 pre-built dimensions. If it doesn't meet your needs, please let us know. We will provide you with further options as soon as possible

------------------------------
We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.
------------------------------

For support, you are welcome to contact us at any time. Please read our Instructions and Important information!

Wall connections

12 mm head diameter of a countersunk screw.stl

This design is intended for the connections between the panels. An example is given under Instructions. This will help you. If you have any further questions, please feel free to contact us at any time

------------------------------
We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

------------------------------
For support, you are welcome to contact us at any time. Please read our Instructions and Important information!

Connectors between the main plates

4-point connector.stl

This design is available in the following dimensions:
- 210 x 210
- 150 x x150

-------------------------------
These are the main plates. Print as many as you need. We recommend planning your project first. For support, you are welcome to contact us at any time. You can also use our instructions to help. Please read our Instructions and Important information!

-----------------------------
We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Main panels for the wall

Main Board 210 x 210.stl

**REWARDS:**
-  **20 Downloads of your choice every month from our extensive catalog**
- Easy Plug-in System
- Premium support
- Commercial License

**WHAT HAPPENS NEXT?**
Simply subscribe and get started . Have fun!

All our products are thoroughly tested for FDM. If you have any setting problems, please feel free to contact us. We'll help you where we can

**COMMERCIAL LICENSE**
With active subscription you have a commercial license to legally sell 3D prints created from the designs available on the Easy Board catalog. Active subscribers are licensed to sell these prints on any platform of their choice. The digital files or similar media such as molds used for propagation are NOT intended for resale or distribution. Commercial license is only given to active subscribers. If you choose to cancel your subscription, your commercial license will end at the time your access expires.

Easy Board - Commercial Licence

**REWARDS:**
-  **10 Downloads of your choice every month from our extensive catalog**
- Easy Plug-in System
- Premium support

**WHAT HAPPENS NEXT?**
Simply subscribe and get started . Have fun!

All our products are thoroughly tested for FDM. If you have any setting problems, please feel free to contact us. We'll help you where we can

Easy Board - Recommended

**REWARDS:**
-  **5 Downloads of your choice every month from our extensive catalog**
- Easy Plug-in System
- Premium support

**WHAT HAPPENS NEXT?**
Simply subscribe and get started . Have fun!

All our products are thoroughly tested for FDM. If you have any setting problems, please feel free to contact us. We'll help you where we can

Easy Board - Explorer

Main Board 150 x 150.stl

2-point horizontal connection.stl

2-point vertical connection.stl

5.5 mm hole without countersink for a screw..stl

6,6 mm hole without countersink for a screw..stl

10 mm head diameter of a countersunk screw.stl

Frame corners - top right and bottom left.stl

Horizontal frame for drill hole.stl

Horizontal frame.stl

Vertical frame for drill hole.stl

Vertical frame.stl

Hello. Thank you for taking the time to read this. On this channel we focus purely on aesthetic designs that have a function.

We want to create order. We will design different parts for our easy board. To make it as easy as possible for you, everything is designed with a simple PLUG-IN system

Please respect us as designers as we respect you. We are investing time and hard work here and would like to ask you not to share the files.

Our catalog is constantly expanding month by month with exclusive ideas. Flexibility is very important to us. If you ever have a problem, don't hesitate to contact us. We will help you further!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Easy Board

Achievements

Seedling

Pinned models

Main panels for the wall

Connectors between the main plates

Wall connections

Frames

Round organizer 120 x 120 x 90

Round organizer 120 x 120 x 60

Round organizer 90 x 90 x 90

Round Organizer 90 x 90 x 60

Round organizer 50 x 50 x 90

Round Organizer 50 x 50 x60

Organizer flat tray 180 x 150 x 20

Organizer flat tray 180 x 100 x 10

Organizer flat tray 150 x 50 x 10

Organizer / Box 120 x 100 x 90

Box / Organizer 90 x 90 x 70

Organizer flat tray 90 x 50 x 10

Box / Organizer 60 x 50 x 35

Frames

Wall connections

Connectors between the main plates

Main panels for the wall