This box has length x width x height : 180 mm x 150 mm x 20 mm This box has length x width x height : 7,09 inches x 5,91 inches x 0,79 inches

We recommend using all connections, but you do not have to use all connections. You can adapt it to your intended use

---

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale only the connector accordingly by 1-2%. Depending on the printer, the accuracy is slightly different. Please do not scale the design!

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

Support is not really necessary. Only if you want, then tree support

For support, you are welcome to contact us at any time. Please read our Instructions and Important information! The PDF is in the mainboard file!