Our design should not only be functional but also visually beautiful. That's why we designed this frame.

A simple example from us. For our example, we used 4 screws for wall mounting because we are not putting anything heavy up.

If you need more wall mounts, we have designed a frame for that too. So don't worry :) If you need anything else, just let us know!

We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

For support, you are welcome to contact us at any time. Please read our Instructions and Important information!