Our design should not only be functional but also visually beautiful. That's why we designed this frame.
A simple example from us. For our example, we used 4 screws for wall mounting because we are not putting anything heavy up.
If you need more wall mounts, we have designed a frame for that too. So don't worry :) If you need anything else, just let us know!We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.
We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.For support, you are welcome to contact us at any time. Please read our Instructions and Important information!