Easy Board

Wall connections

by
Easy Board
Follow
Follow
Remix Model
Easy Board
Easy Board
|
Image 1 of 2
Wall connections 3d model
Easy Board
Easy Board
|
Image 1 of 2
Wall connections 3d model
2D
3D
Makes
Wall connections 3d model
Wall connections 3d model

This is one of the most important parts. Your design goes on the wall. Since we don't know what you want to use the design for, we recommend that you attach it well to the wall.

At the end, please ensure good strength and test the design with a test to see if everything is stable!

We have created 4 pre-built dimensions. If it doesn't meet your needs, please let us know. We will provide you with further options as soon as possible


We used 0.2 mm tolerance for the connections. If the adhesion is not suitable, please scale the design accordingly by 1-2%. Depending on the printer, the accuracy is slightly different.

We recommend printing all of our designs with 0.16 or 0.20 layer height, 3 wall lines and at least 15% infill. Depending on the intended use, please adjust the settings and the material used.

For support, you are welcome to contact us at any time. Please read our Instructions and Important information!


2 Likes0 DownloadsNovember 3, 2024


2 Likes0 DownloadsNovember 3, 2024

Instructions

Filament • 16mm

Layer height16 mm
Infill density15 %
SupportsNone
BrimNo

Filament • 20mm

Layer height20 mm
Infill density15 %
SupportsNone
BrimNo