2 in 1 LEGO model

LEGO with skeleton model

Here is a new combined model of Lego man & Lego Skeleton 

Lego man (https://grabcad.com/library/classic-lego-man-1)
Lego Skeleton  (https://grabcad.com/library/lego-skeleton-minifig-fantasy-era-1)

LEGO

Lego.x_t

Stormtrooper LEGO 

Stromtrooper LEGO.STEP

**Brick by Brick, Holiday Cheer!**

The Holiday season is getting longer every year, so it is beyond time to start decorating your home with festive 3D Prints! What better way to show off your Nerd-cred & decorate than a life size interlocking brick Christmas Wreath! Ok that name isn't catchy, how about “LEt'GO Holiday Wreath”, is that better? Yea, that is a better way to describe this Xmas decorating device. 

A friend requested me to print them one of these, and I wanted to tweak the designs I found online, so I started over from scratch. Some measurements were pulled from one design so I'm call this a “Remix” of the design on [Printables by Fuganater](https://www.printables.com/model/58424-giant-lego-wreath-no-supports-needed). 

Design has “Leaves” that interlock into each other to form the Wreath, and “Studs” that can be printed in whatever color you like to decorate it. All of these parts press fit onto each other tightly enough to not come apart accidentally but still be able to be disassembled easily. 

Assembled Wreath is approximately 10" (254mm) across. A larger version is coming soon. (Scaling can cause tolerance issues but you are welcome to do so as you see fit.)

**NOTE:** Proper tuning & extrusion accuracy is a requirement to produce a good fit. A Test print file is included to ensure you have good results before you start printing the full design. Print the Test Part & one of the “Studs” to check your fitment before diving into the full print!!

---------------------------------------------------------------
**Parts Needed (Affiliate Links):**
- [Polymaker Filament](https://tinyurl.com/Polymakerr)

---------------------------------------------------------------
 **Files Included:**
- LEt'GO Holiday Wreath STEP File
- LEt'GO Leaf STL (Print 6+ for Wreath)
- LEt'GO Stud STL (Print as many as you want to decorate with.)
- LEt'GO Test Print (Print w/ 1 Stud to test your fitment accuracy.)

---------------------------------------------------------------
**Recommended Print Settings: VERY IMPORANT**
- 3 Perimeters
- 15% Infill
- NO Supports Required
- .2mm 1st Layer Height
- .28mm for ALL Other Layers
- ASA Filament Recommended if decorating outside or hanging in a window.

**NOTE:** This was designed with these exact print paremeters in mind. Using other layer heights may cause fitment issues, change at your own risk.

---------------------------------------------------------------
Want to Support what I do? Check out my social medias please!

**Link Tree:** http://www.MandicReally.com/links
---------------------------------------------------------------

Designs covered by a Creative Commons Share-Alike License.  Original version created by Fuganater and posted to Printables [HERE](https://www.printables.com/model/58424-giant-lego-wreath-no-supports-needed).

Want to become an Authorized Reseller? Become a Patron on the “Merchant” Tier on my Patreon to begin selling today: [https://www.Patreon.com/MandicReally](https://www.Patreon.com/MandicReally)

LEt'GO Holiday Wreath - Support Free Interlocking Brick Xmas Cheer!

LEt'GO_Wreath_V3.step

A complete file of Darth Vader Lego
Design in Solidworks software
STL & STEP files

Darth Vader 3D Print Lego 

Darth vader Lego.x_t

New model added in LEGO Collection. 

Comment your favorite superhero name & we will make a LEGO model of your favorite superhero.

STL & Parasolid files


Deadpool LEGO STL file

Deadpool LEGO.x_t

Lego design of Stormtrooper
STL & Parasolid files

Check other designs here
https://thangs.com/Roboninja

Stormtrooper Lego 3D Printable 

Stormtrooper Lego.x_t

Boba Fett Lego

Boba Fett Lego.STEP

Ironman LEGO

Ironman Lego.STEP

LEGO Spiderman 

Lego Spiderman.STEP

Hi !

I just mixed a LEGO & the ROCK to create the ULTIMATE LEGOROCK !

====================

Files used :
https://thangs.com/Roboninja/Ironman%20LEGO-44787
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the hands
- No special parameters needed
- 107.0mm x 63.8mm x 181.6mm (on the photos)
- ~24 hours of print
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

The LegoROCK

Mandalorian LEGO

Mandalorian LEGO.STEP

All needed pieces for a lego ironman minifigure
pretty simple! 
UPDATE: After some testing, I realize the hands connector might need some sanding with fine-grade sandpaper. If y'all have any suggestions, let me know!

ironman lego minifigure.stl

All needed pieces for a lego ironman minifigure
pretty simple! 

After a long time, here is the new version of lego, the Venom Lego model.

Comment your favorite character name; I will try to make their lego model.

Check out our other Car & Lego models here
https://thangs.com/Roboninja


Venom Lego 3D Printable

Venom.x_t

**Collapsing Lego Lightsaber**
_Print-in-Place Version_

This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version prints complete all as one piece. 

The [Replaceable Blade Version](https://than.gs/m/944329) is available to my Thangs members.

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld)


Lego Lightsaber Print-in-Place

**Collapsing Lego Lightsaber**
_ Print-in-Place Version_

This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version print complete all as one piece. 

The [Replaceable Blade Version](https://than.gs/m/944329) is available to my Thangs members.

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld


LEGO Toilet paper holder

LEGO Toilet paper holder.STEP

another model for the #BackToSchool contest, this time it's a Lego man pen holder, which can be printed without supports.

aupport;  https://www.patreon.com/pressprint

happy printing.

lego man pen holder 

Spiderman LEGO 

Spider man Lego.fbx

Batman Lego

Batman Lego.STEP

New 3D Printing Lego model

The new version of this model
(https://grabcad.com/library/classic-lego-man-1)

Lego Star 

Lego Star.x_t

Detail model of Batman Lego
No Texture in this, Print in 3D

Check out other models here,
https://thangs.com/designer/Roboninja

Toys & GamesBuilding Toys

Categories

Popular

Personalize

Trending