Bulbasaur With Rose

Hi !

I just mixed a Bulbasaur & a Rose to create this beautiful Bulbasaur !!

====================

Files used :
https://www.thingiverse.com/thing:283738
and
https://www.thingiverse.com/thing:1576163

====================

- Supports only for the head
- No special parameters needed
- 84.8mm x 137.8mm x 105.6mm (on the photos)
- ~20 hours of print (with supports & on the position of the photos)
- Standard quality : 0.2mm
 -Infill : 20%
- Print in place (no assembly)

The ROCKnix - FULL FLEXIBLE

Hi !

I just mixed a ONIX (Pokémon) & the ROCK to create the ULTIMATE ROCKnix ! And it's FULLY FLEXIBLE !!!!!

====================

Files used :
https://www.thingiverse.com/thing:5165613
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head
- No special parameters needed
- 185.5mm x 192.8mm x 65.1mm (on the photos)
- ~19 hours of print (with supports & on the position of the photos)
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

TROCKnnosaurus Rex

Hi !

I just mixed a T-REX & the ROCK to create the ULTIMATE TROCKnnosaurus Rex !

====================

Files used :
https://www.thingiverse.com/thing:16331/files
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the tail
- No special parameters needed
- 152.8mm x 152.2mm x 101.6mm (on the photos)
- ~10 hours of print (with supports & on the position of the photos)
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

ROCKmander

Hi !

I just mixed a Charmander (Pokémon) & the ROCK to create the ULTIMATE ROCKmander !

====================

Files used :
https://cults3d.com/fr/mod%C3%A8le-3d/art/pokemon-salameche-hd-charmander
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the hands
- No special parameters needed
- 72.0mm x 54.6mm x 101.0mm (on the photos)
- ~6 hours of print (with supports & on the position of the photos)
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

IROCK Man

Hi !

I just mixed a Iron Man & the ROCK to create the ULTIMATE IROCK Man !

====================

Files used :
https://www.thingiverse.com/thing:902569
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the hands
- No special parameters needed
- 98.8mm x 98.8mm x 196.4mm (on the photos)
- ~15 hours of print (with supports & on the position of the photos)
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

FROCKddy Fazbear FNAF

Hi !

I just mixed a Freddy FAZBEAR & the ROCK to create the ULTIMATE FROCKddy Fazbear !

====================

Files used :
https://www.thingiverse.com/thing:741157
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the hands
- No special parameters needed
- 112.7mm x 37.8mm x 156.4mm (on the photos)
- ~10 hours of print (with supports & on the position of the photos)
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

The LegoROCK

Hi !

I just mixed a LEGO & the ROCK to create the ULTIMATE LEGOROCK !

====================

Files used :
https://thangs.com/Roboninja/Ironman%20LEGO-44787
and
https://www.thingiverse.com/thing:4960850

====================

- Supports only for the head & the hands
- No special parameters needed
- 107.0mm x 63.8mm x 181.6mm (on the photos)
- ~24 hours of print
- Standard quality : 0.2mm
- Infill : 20%
- Print in place (no assembly)

Hugo_BSQT

Achievements

Seedling

Fan Favorite

Explorer