This is just a simple and quick to print icescraper - print and toss it under the car seat to be ready for winter! With a nice textured handle, it's easy to grip, even with gloves on! Such a minimalistic yet functional design can only be named one thing: MinimICE!

Overview The model comes in 4 sizes - and all sizes in 2 styles.

Sizes are defined by the width of the scraper ‘blade’:

• 75 mm
• 100 mm (the one on the photos)
• 125 mm
• 150 mm

The 3 styles are:

• Solid (can be printed with exposed infill if wanted)
• Outline (the one on the photos)
• Outline (strong) (as outline, but with a stronger handle

Assembly None - print → you are ready.

Print instructions

• Orientation: All files should be printed as they are imported.
• Supports: No
• Layer height: 0.2 mm (or lower to get as smooth a blade as possible)
• Walls: If you choose the outline version, maybe increase the Walls count a little, to avoid tiny infill bits.
• Top/Bottom layers: Default 3-5 - or 0 if you want to show the infill of the Solid versions. Happy printing!