**Print-In-Place, No Supports, Articulating Fidget Toy**

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**[Have you noticed that Cold Snap has a NEW FRIEND?](https://than.gs/m/964165)**

_As warm winds fade and disappear, a chilly dragon child grows near.  He swoops in quick to fill the gap: the brisk blue breeze, the sly Cold Snap!_

Cold Snap is the eighth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Cold Snap to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Cold Snap:**
https://than.gs/m/960229
**Loose Tolerance Cold Snap:**
https://than.gs/m/960235

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Other Models:**
Find Cold Snap's fierce friend Frostbite over here:

**Tight Tolerance Frostbite:**
https://than.gs/m/964164
**Medium Tolerance Frostbite:**
https://than.gs/m/964165
**Loose Tolerance Frostbite:**
https://than.gs/m/964166


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Cold Snap, Winter Dragon Child - Articulated Snap-Flex Fidget (Medium Tightness Joints)

ColdSnap_Dragon_MediumTightness.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**[Have you noticed that Cold Snap has a NEW FRIEND?](https://than.gs/m/964165)**

_As warm winds fade and disappear, a chilly dragon child grows near.  He swoops in quick to fill the gap: the brisk blue breeze, the sly Cold Snap!_

Cold Snap is the eighth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Cold Snap to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Cold Snap:**
https://than.gs/m/960229
**Medium Tolerance Cold Snap:**
https://than.gs/m/960234

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Other Models:**
Find Cold Snap's fierce friend Frostbite over here:

**Tight Tolerance Frostbite:**
https://than.gs/m/964164
**Medium Tolerance Frostbite:**
https://than.gs/m/964165
**Loose Tolerance Frostbite:**
https://than.gs/m/964166

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Cold Snap, Winter Dragon Child - Articulated Snap-Flex Fidget (Loose Joints)

ColdSnap_Dragon_Loose.stl

This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an improved tealight compartment with screw on cap (print separately). Holds tealights up to 40mm in diameter.

Built-in scaffolding supports are to be removed.

Creative Commons License BY-NC-ND 4.0
A commercial license to sell these prints is available by subscribing to my Thangs Commercial Partner membership plan.

Suggested Print Settings – PrusaSlicer
Print in place – no supports necessary (organic/tree supports can be used to create a cleaner print)
Layer Height: 0.2mm
Infill: 8% Gyroid
Perimeters: 2 or 3 (2 will make the tealight glow more prominent, 3 should improve the exterior surface quality)
Extra Perimeters if Needed: X
Extra Perimeters on Overhangs: X
Avoid Crossing Curled Overhangs: X
Seam Position: Random
Enable Dynamic Overhang Speeds: X
Adjust Retraction Settings for excessive retractions dependent on filament.


Snowglobe Votive Ornament - Xmas Town

snowglobe_XmasTown.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**

**[Have you noticed that Cold Snap has a NEW FRIEND?](https://than.gs/m/964165)**

_As warm winds fade and disappear, a chilly dragon child grows near.  He swoops in quick to fill the gap: the brisk blue breeze, the sly Cold Snap!_

Cold Snap is the eighth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Cold Snap to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart



**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Medium Tolerance Cold Snap:**
https://than.gs/m/960234
**Loose Tolerance Cold Snap:**
https://than.gs/m/960235

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Other Models:**
Find Cold Snap's fierce friend Frostbite over here:

**Tight Tolerance Frostbite:**
https://than.gs/m/964164
**Medium Tolerance Frostbite:**
https://than.gs/m/964165
**Loose Tolerance Frostbite:**
https://than.gs/m/964166

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Cold Snap, Winter Dragon Child - Articulated Snap-Flex Fidget (Tight Joints)

ColdSnap_Dragon_Tight.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**


_The winter chill that fills the air serves well to warn all those who dare to venture out into the night that frigid winds may bring Frostbite!_

Frostbite is the ninth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Frostbite to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart



**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Frostbite to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Frostbite:**
https://than.gs/m/964164
**Loose Tolerance Frostbite:**
https://than.gs/m/964166

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
Requires good bed adhesion

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Frostbite, Winter Dragon Child - Articulated Snap-Flex Fidget (Medium Tightness Joints)

FrostBite_MediumTightness.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**


_The winter chill that fills the air serves well to warn all those who dare to venture out into the night that frigid winds may bring Frostbite!_

Frostbite is the ninth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Frostbite to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart



**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Frostbite to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Medium Tolerance Frostbite:**
https://than.gs/m/964165
**Loose Tolerance Frostbite:**
https://than.gs/m/964166

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
Requires good bed adhesion

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.ore concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.



Frostbite, Winter Dragon Child - Articulated Snap-Flex Fidget (Tight Joints)

FrostBite_Tight.stl

Three sizes of “Ice Bubbles” designed for spiralized printing to maximize translucency and minimize material and print time. These are great prints for your clear or translucent filaments!

See here for video: https://youtu.be/xJ5POHSJL1I 

Files are provided for 30mm, 40mm, and 50mm diameter balls. You will need to print two pieces to make one ball. When printed with a 0.5mm nozzle, the balls require 3g, 5.4g, 8.4g of filament. That means 1kg of filament you could make approximately 333 small Ice Balls!

Here are some recommendations for spiralized printing:
- Use thick layer heights, 0.2mm or greater
- Set your “Bottom Layer” to 1
- Try using a skirt for bed adhesion, but if that is not working then try a brim. You will just have to remove the brim afterwards
- If you get funny stringing on the top layer, try moving the z-seam alignment around

AI generated description:

Explore the exquisite collection of 3D models on Thangs.com, featuring "Ice Bubbles" designed by DaveMakesStuff. These models bring a touch of novelty to your home & garden decorations, incorporating a unique element of translucency due to spiralized printing methods. The design minimizes both print time and material consumption, making it an efficient choice for 3D printing enthusiasts. These models are especially attractive when printed with clear or translucent filaments, further enhancing their ice bubble visuals.

The ice bubbles come in three different sizes: 30mm, 40mm, and 50mm, each requiring two printed pieces to complete a single ball. With a 0.5mm nozzle, the balls require 3g, 5.4g, and 8.4g of filament respectively. This means that with a single 1kg filament roll, one can produce approximately 333 small Ice Balls, perfect for decorating your space or hosting a themed party!

It is recommended to use thick layer heights of 0.2mm or greater for spiralized printing. Customize your settings to a 'Bottom Layer' of 1. For bed adhesion, you may use a skirt, but a brim can be adopted if the skirt proves ineffective, with the brim being removable afterwards. If you encounter stringing on the top layer, try adjusting the z-seam alignment for better results. Utilize these unique 3D models to bring a cool aesthetic to your home and garden décor. Check the images to have a better understanding of the final product and achieve the best-printed output for these unique Ice Ball designs.

Ice Bubbles

Ice Bubble 50mm.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**


_The winter chill that fills the air serves well to warn all those who dare to venture out into the night that frigid winds may bring Frostbite!_

Frostbite is the ninth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.



**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Frostbite to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 

Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart



**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Frostbite to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Frostbite:**
https://than.gs/m/964164
**Medium Tolerance Frostbite:**
https://than.gs/m/964165

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Brim Suggested
Requires good bed adhesion

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.



Frostbite, Winter Dragon Child - Articulated Snap-Flex Fidget (Loose Joints)

FrostBite_Loose.stl

This “Truss Tree” is part of a set of four tree-shaped decorations featuring a selection of architectural truss systems. The bottom can be left open for use as an electric tealight cover or decoration, or you can use the threaded insert to hold objects inside. 

See here for video: https://youtu.be/VxIjycsYUqo

The models shown are printed with the following types of tricolour silk filament by Eryone:
Flourite: Red & Yellow & Blue”
Diamond: “Red & Blue & Green”
Truncated Octahedron: “Red & Gold & Purple”
Kelvin: “Gold & Silver & Copper”

Other designs in the set:
Diamond: https://social.thangs.com/m/475642 
Flourite: https://social.thangs.com/m/475644 
Kelvin: https://social.thangs.com/m/475645 
Truncated Octahedron: https://social.thangs.com/m/475646



Truss Tree (Truncated Octahedron)

Truss Tree Truncated Octahedron.stl

These contoured abstract trees are designed to print in spiralized mode to maximize translucency and minimize material and print time. 

See here for video: https://youtu.be/UjMJ4U9JbGE 

Download includes three sizes of trees with three unique contour patterns for each size. When printing in spiralized mode, you can print with or without a bottom layer. 

When printing in spiralized mode with no bottom with a .5mm nozzle, these trees take only 8g, 10g and 13 g of filament, making them a great choice for getting the most out of your fancy filaments!

These designs are inspired by the style of Canadian painter Lawren Harris.

AI generated description:

Experience the festive beauty of our 3D Lawren Trees model, an offering from thangs.com. Designed with artistic inspiration from the style of celebrated Canadian painter Lawren Harris, these captivating abstract tree models evoke a dynamic seasonal ambiance. An ideal choice to illuminate your Christmas celebrations, these 3D models are best printed in spiralized mode to maximize translucency, offering a distinctive touch to your festive decor. Our download includes three sizes of trees, each uniquely contoured for a captivating aesthetic appeal.

The 3D Lawren Trees models are designed to minimize material use and print time, providing both eco-efficiency and time-saving benefits. Especially when printed in spiralized mode with a .5mm nozzle, these models only require 8g, 10g, and 13g of filament respectively. This makes these innovative 3D models a perfect choice for maximizing the potential of your specialty filaments.

To provide a convenient and user-friendly experience, these 3D models can be printed with or without a bottom layer when using spiralized mode. Explore the enchanting world of 3D printed Christmas decor with our Lawren Trees 3D model from Thangs.com - where innovative design meets festive spirit.

Lawren Trees

Lawren Tree Large 2.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpts By @ChelsC423***

Cute winter containers with screw cap closure.

***To sell physical printed objects, please see the ChaosCore Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

Cute Deer Container

Deer_Container.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
_Sculpt by @ChelsC423_

Ice Skating Tweety

IceTweety_WHOLE.stl

Truss Tree (Kelvin)

Truss Tree Kelvin.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
Six more weeks of winter....boooooo!
***Sculpts By @ChelsC423***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech***




Winter Groundhog


Keep your winter stash cozy warm in this Knitted Mittens container! Includes threaded insert for bottom.

See here for video: https://youtu.be/3JcjSH22ks0 

Knitted Mittens: https://social.thangs.com/m/474050 
Knitted Toque: https://social.thangs.com/m/474048 



Knitted Toque Container

Knit Toque Container.stl

Tired of losing your phone in snowbanks? Problem solved! This Snowshoe Phone Holder will let you keep using your devices even on the fluffiest of snowbanks.

See here for video: https://youtu.be/h7LqO30gHc8 

“Snowshoe Base” is a standard print. The “Phone Holder” files have a print-in-place hinge. The “Phone Holder Standard” is designed for phones without a case, “Phone Holder Extended” will fit a phone in a case.


Snowshoe Phone Holder

Snowshoe Phone Holder Display only do not print.stl

This customizable posable penguin makes for a festive fidget toy.

[https://youtu.be/M_sV88fGf2U
](https://youtu.be/M_sV88fGf2U)


**Printing**

- All parts can be printed without supports.
- Add brims if curling is an issue - especially the smaller pieces.
- Base and middle sections come in multicolor variants for multicolor printers.
- Use a filament swap to get 2 colors on penguin eyes.


**Assembly**

- Add eyes and beak to head section - add glue if these parts are loose.
- Thread TPU filament or similar thin elastic band from the penguin's head to base.
- Pull the band tight and tie the loop.
- Press the knot into the penguin base and trim any remaining cord.
- Optional: glue on hat
- Optional: glue on feet
- See the video above for the complete assembly process.



**Customization**

Check out [this collection](https://www.printables.com/@3DPrinty/collections/1024770) for more hats and accessories!



**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)

Posable Penguin Fidget

Demo - Assembled.3mf

Top Hat.stl

Middle - Split 1.3mf

Middle - Split 2.3mf

Here's a slightly different version of the Snowflake Fidget Spinner (Classic), engraved with a delicate line on each branch, both at the top and bottom.

This subtle detail adds a touch of sophistication to the design of the spinner, elevating it beyond a simple gadget ❄️

As it spins, the minimalist lines create a visually appealing effect, making it a stylish and functional accessory for moments of relaxation and focus.

- - -

**Check out the video to see how it spins**: https://youtube.com/shorts/lgI1e1xngr8?si=oK5CL4vQ1w2agQt6

- - -

**Size: 7 x 8 x 1 cm (W, L, H)**

**_It's a print-in-place design, so no support needed nor assembly is needed._**

_If you like, you can add a drop of lubricant or light oil in the center handle to help the spinner spin faster with less friction._

---

**No supports needed.**

---

**_If you like my work and would like to support me so that I can bring you new content, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please do consider joining my Membership here:_** https://than.gs/u/296962?plans=true

---

**INSTAGRAM:** https://www.instagram.com/randomizy.3d/

**TWITTER:** https://twitter.com/Randomizy3D

**FACEBOOK:** https://www.facebook.com/randomizy.3D

**Check More Here:** https://linktr.ee/Randomizy

Snowflake Fidget Spinner (Classic Decorated)

Snowflake Fidget Spinner (Classic Decorated).stl

A collection of 12 Christmas ornaments.

In order to make the Star ornament, you'll need to print two Star Orn Bodies, four Star Orn Arms, and one Star Orn Top.  In order to make the Snowflake ornament, you'll need to print two Snowflake Orn Bodies, six Snowflake Orn Arms (Small), five Snowflake Orn Arms (Large), and one Snowflake Orn Top.  Glue will be needed to assemble each.  The Lanter Ornament will hold one standard led tealight.  The Lantern Orn Mid and Lanter Orn Bottom should interlock with one another.  Just line up the indentations on the Middle part to the indentations of the Bottom part then turn counterclockwise.  





Christmas Ornament Collection 2022

Christmas Orn 5-2022.stl

Add some arctic chic to your serving table this year with these cool ice bowls!

See here for video: https://youtu.be/wdaEN05fzJQ 

Small Ice Bowl: https://social.thangs.com/m/551446 
Large Ice Bowl: https://social.thangs.com/m/551448 

These are advanced prints that require a well calibrated printer and experience with slicing complex models. 

The bowls are printed upside down. I recommend raising the model 3mm off the build plate and building supports up into the cavity of the bowl.

In order to maximize optical clarity and visual effect, you will want to minimize the amount of infill. These are excellent prints to try out the “lightening infill” feature in Cura. “Lightening infill” minimizes the amount of infill material used, and also creates interesting “crack” silhouettes in the finished print.

Increase the infill density and reduce the angle of overhang that gets supported, aiming for adequate support at the base of the icicle, but minimal support up inside the icicles. Be sure to do a layer-by-layer inspection prior to printing to ensure that all areas are properly supported.


Ice Bowl (Small)

Add some artic chic to your serving table this year with these cool ice bowls.

See here for video: https://youtu.be/wdaEN05fzJQ 

Small Ice Bowl:
Large Ice Bowl:

These are advanced prints that require a well calibrated printer and experience with slicing complex models. 

The bowls are printed upside down. I recommend raising the model 3mm off the build plate and building supports up into the cavity of the bowl.

In order to maximize optical clarity and visual effect, you will want to minimize the amount of infill. These are excellent prints to try out the “lightening infill” feature in Cura. “Lightening infill” minimizes the amount of infill material used, and also creates interesting “crack” silhouettes in the finished print.

Increase the infill density and reduce the angle of overhang that gets supported, aiming for adequate support at the base of the icicle, but minimal support up inside the icicles. Be sure to do a layer-by-layer inspection prior to printing to ensure that all areas are properly supported.


winter

Most Popular of All Time

Categories

Popular

Personalize

Trending