Jewelry holder “echinata coral” by gazzaladra
5 downloads · 7 months ago · This [featured model from gazzaladra](https://thangs.com/designer/gazzaladra/3d-model/Jewelry%20hold
This featured model from gazzaladra is part of the Thangs Presents! Welcome to 3D Printing and Welcome to 3D Printing: Deluxe Edition membership plans.
If you enjoy this model, be sure to check out other models from gazzaladra and follow for more amazing content!
A jewelry holder inspired by a beautiful coral. It can hold all sorts of products like bracelets, earrings or rings. Species: Acropora echinata
Included versions
- Echinata_coral_round_base: The default version as seen in the images.
- Echinata_coral_square_base: The coral with a square base.
- Echinata_coral_corner_base: The coral with a round base and corner piece.
- Echinata_coral_no_base: Just the coral – to make your own base
Scaling / size (round base)
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x 196 mm
- Smaller (80%): 160 x 160 x 157 mm
- Small (60%): 120 x 120 x 117 mm
- You can scale it down even smaller but it kind of loses its purpose
Print settings Required build volume: 200 x 200 mm Material usage: 240g
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none