Created by Thangs Sync Client
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Wolf pendant - Jewellery

wolf

Loki's headpiece to go on your crocs.  

Honestly these were made just for the meme and not for comfort, but then people actually wanted it so here ya go.

Definitely would print in TPU or a flexible filament if you don't wanna stab your ankles.

THESE WERE MADE FOR THE MEME. I REPEAT. FOR THE MEME. (Which means they were derived from my previous Loki headpiece model in about 15 mins lol). If it’s a sucky model don’t hate me.

Loki Croc Attachment

Loki's headpiece to go on your crocs.  

Honestly these were made just for the meme and not for comfort, but then people actually wanted it so here ya go.

Definitely would print in TPU or a flexible filament if you don't wanna stab your ankles.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpts By @ChelsC423***
Psyduck in Costume.

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

Psyduck -Freddy Krueger Costume

Hydra Ring 

Hydra ring.STEP

Remixed Frog+ rock

used 3d models:

https://www.thingiverse.com/thing:5189126
https://www.thingiverse.com/thing:4960850

The fROCK

This Skull Jewelry Set includes a necklace, choker, bracelet, and different sizes of rings and earrings!

See here for video: https://youtu.be/VNuI0LSqct0

The pieces that contain multiple skulls use a unique print-in-place ball-and-socket joint that allows the finished print to fully turn, twist, and rotate. See below for details and printing instructions

Necklace: The Skull Necklace is provided in two versions: a closed-loop 36-skull version and an open-loop 35 skull version. Both prints have an outside print diameter of 177mm and a finished length or circumference of approximately 50cm. The closed-loop version is too small to fit over most heads but can be used as a prop. The ends of open-loop version are connected using string or elastic. Multiple necklaces and chokers can be combined to make some serious skull bling. 

Choker: The 19-skull Choker print has an outer diameter of 111mm and finished length of approximately 28cm.  The ends are connected using string, ribbon or elastic. Multiple necklaces and chokers can be combined to make some serious skull bling. 

Bracelet: the 20-skull Bracelet print has an outer diameter of 111mm and finished circumference of approximately 28cm.  

Rings: The rings are provided in sizes 5, 7, 9, 11 and 13 to fit all fingers and thumbs. There are plenty of online sizing guides if you are not sure what size you need. 

Earrings: Skull Earrings are provided in single and multiple-skull dangling versions. You will need some standard earring hooks and ¼” jump rings to attach to the embedded loop on the top skull.

Here are some additional printing instructions related to the print-in-place ball-and-socket joints:

The inner spheres print on top of tiny supports within the cavity of the neighbouring skull. Once printed, a light twist of each skull frees the ball within the cavity and the skull chain can turn and bend. Be sure to let your print fully cool first! If the plastic is still soft, the connector may break when you try to move it.

Plan your supports carefully. A suggested technique using Cura is to raise the object of the build plate by 3mm, and then add tree supports underneath. Switch “Support distance priority” to “xy overrides z” and tighten up the “xy support distance” to 0.1mm.

This design is a submission to the "HalloWearables Design Contest With Zack Freedman"

#HalloWearable #HalloWearables #skull #bones #skeleton #jewelry #necklace #bracelet #ring #rings #earrings #halloween #cosplay


Skull Jewelry Set

Jewelry Set.stl

If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Wolf Skull - Jewellery

wolf-skull-1.stl

Knurled Fidget Bolt Keychain

This design prints in 3 separate pieces: The bolt, the cap, and the spinner. I included 2 versions of the bolt, a shorter version and a longer version. The cap and spinner work for either.

-The bolt is hollowed to allow the storage of "hand-rolled cigarettes" or a little bit of cash.
-The cap is reverse-threaded to avoid losing it from the action of the spinner, and to make getting into the "hidden" storage a little less obvious.
-Mix and match colors to make your perfect fidget bolt.

These files were uploaded with a non-commercial license. If you would like to sell prints of this design, you can join my Patreon community and sell the fidget keychain or prints of any of my other models!

https://www.patreon.com/thinair3D

Here are the 3d printing settings I used:
No Supports
Nozzle Size: I have tested these with 0.4 and 0.6 size nozzles and they print great. I don't know about anything bigger.
Layer height: The lower the layer height the smoother it will be, but I print them at 0.20 and they work great.
Scaling: I haven't tried printing it at different scales, but I wouldn't scale down too much or the clearances may have issues. Scaling up should be ok.

Knurled Fidget Bolt Keychain

Bolt (Long, Knurled, Wide).stl

Spinner_(Knurled,_Wide).stl

Spinner_(Spiral,_Wide).stl

Here is a basic, 1x1 Gridfinity glasses holder. Holds sunglasses as well as eyeglasses up to 145mm in width. However the file can easily be modified to increase or decrease height as needed.

Use the following print settings and you should have no issues as well as an under 2 hour print:

Layer height: .24 - .32
Walls / Top / Bottom: 3
Infill: 15% - 25% (provides weight to counter glasses)
Supports: none

View all of my Gridfinity models here:

https://thangs.com/search/gridfinity%20%252B%20%22thingymaker9000%22

____________________________________________

If you find these or anything else I make useful, you can buy me a beer over here:

https://www.buymeacoffee.com/thingymaker9000

Enjoy!

Gridfinity 1x1 Glasses Holder - No Supports

Here is a basic, 1x1 Gridfinity glasses holder. Holds sunglasses as well as eyeglasses up to 145mm in width. However the file can easily be modified to increase or decrease height as needed.

Use the following print settings and you should have no issues as well as an under 2 hour print:

Layer height: .24 - .32
Walls / Top / Bottom: 3
Infill: 10% - 20%
Supports: none

View all of my Gridfinity models here:

https://thangs.com/search/gridfinity%2520%252B%2520%2522thingymaker9000%2522?manualModelView=true&scope=all

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Charlie Brown-Halloween Costume

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from DrLex
https://www.thingiverse.com/thing:2738211
https://github.com/DrLex0/print3D-FlexiRex

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rex Keychain with a hidden loop

A simple yet effective apple watch dock made to be stuck to the side of a bedside table with strong double-sided tape. If you would like to see how this was designed you can see it here as part of a 10 minute design challenge: https://youtu.be/oyEgbeY3crk 
#MakerMadness 

Apple Watch Dock

Apple Watch Dock 0.15 Clearance.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5444303.

### This is skully the mask ! #
i find the idea of articulated mask cool so i made one!
it use 2 axes placed in eye height to articulate the jaw naturaly. Plus it is easy to print.
It is scaled fit small face so don't hesitate to mess with the scale (approximaly 15 cm by 20 cm)

the configuration is on the photos
### To make it work you will need :

- 2x skully_pivot
- 2x rubber band (i used 3mm large ones)
- 4x 12mm M3 bolt
- 4x M3 nut
- 1x thin rope thing to wear it.

edit :i forgot to add on the image a skully_pivot! this model is the articulation and is nessesary for the full mask. if not it don't articulate well.


Skully the articulated mask

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rabbit Keychain

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Keep the force with you wherever you go with this adorable Grogu keychain 3D printed in vibrant colors. 

You can also find our Grogu Fridge Magnet here
https://than.gs/m/837132


Grogu Keychain

grogukeychainv2.3mf

Simple spooky print for friends or your shop!

Make sure to like to keep weekly free files coming!

To sell physical prints of my models please subscribe to thangs memberships!

Bone Keychain - Print in place

These Celtic Knot bracelets come in 5 sizes from extra-small to extra-large. See photos for sizing chart.

See here for video: https://youtu.be/ehJaQwOtj-8 

See here for similar “Ripple Bracelets”: https://social.thangs.com/m/638945 


Celtic Knot Bracelets

Celtic Knot Bracelet Medium.stl

A folklore Japanese demon oni mask. Traditionally, it's a symbol of protection with an ability to punish any evil or injustice. A great Halloween idea to wear as a face mask or if you just want to scare to impress.
#pdo #japan #demon 

Halloween mask, Japanese style demon mask

RetroMaker Cassette Tape. Can be used on a keychain.

Best printed in Resin attached to the plate from the top of the cassette. I will try to update a file with supports included.

Creative Commons License BY-NC-ND 4.0


RetroMaker Cassette Tape Keychain

RetroMaker Cassette Tape. Can be used on a keychain.

Best printed in Resin attached to the plate from the top of the cassette. I will try to update a file with supports included.

Creative Commons License BY-NC-ND


RetroMaker Cassette Tape

To Celebrate the upcoming Barbie movie release, I have created this commemorative keychain. It is a print-in-place model with the inner circle being able to spin. Making the keychain not only stylish but also great fun as a fidget.
-If you would like access to the ams files for this model, it is available under another model that is available for my Thangs Members.

Print Settings
no supports
Orient with text facing upwards on the bed
.08 - .1 mm layer height



Barbie Keychain

To Celebrate he upcoming Barbie movie release, I have created this commemorative keychain. It is a print-in-place model with the inner circle being able to spin. Making the keychain not only stylish but also great fun as a fidget.
-If you would like access to the ams files for this model, it is available under another model that is available for my Thangs Members.

Print Settings
no supports
Orient with text facing upwards on the bed
.08 - .1 mm layer height



multicolor print easy to assemble, some parts need support

Patrick Steak Costume

Preview.stl

Nike Keychain
Size: 8cm x 5cm x 0,5cm
3 print-ready separator files

Support our work with your donation!  Thanks
https://www.paypal.com/donate/?hosted_button_id=RXNWN4KHFH7EG

Follow the youtube channel to help the channel and encourage more free creations
https://www.youtube.com/@Alienexplorer_pnz

Apparel

Most Popular of All Time

Categories

Popular

Personalize

Trending