tracking pixel
Egīls B

Vortex Balance Sphere fidget spinner

by
Mazetropolis
Follow
Follow
Remix Model
Mazetropolis
Mazetropolis
|
Image 3 of 9
Vortex Balance Sphere fidget spinner 3d model
Mazetropolis
Mazetropolis
|
Image 3 of 9
Vortex Balance Sphere fidget spinner 3d model
2D
3D
Makes
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model
Vortex Balance Sphere fidget spinner 3d model

If you enjoy fidget spinners, then the Vortex Sphere fidget spinner will be something you enjoy! How long can you have the Sphere spin while balanced on the top of the pole?

Have it sit on the side of the desk as a nice desk accessory or have fun with it as it’s the perfect fidget spinner. If you can’t seem to balance it spinning on the top of the pole, you can spin it on your table w without the pole.

Quick and simple print yet very engaging and mesmerizing action packed in just those 3 little parts!

If you enjoy my maze designs consider joining Mazetropolis Facebook group to get sneak peaks and updates of the upcoming designs as well as have exclusive early access.

If you have an ETSY shop and would like to start selling printed versions of my designs, you can access all my designs with a commercial license for just $10 (for early members) and just $15 if you missed the early subscriber offer!

Printing specifications:

The Sphere:

Print Dimensions: Diameter of the sphere is 5 cm (1.97 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hour Amount of material required: ~ 5.5 m (16 grams)

The Spinner part:

Print Dimensions: base of the spinner part is 5 cm (1.97 inches) by 5 cm (1.97 inches), height of this part is 5 cm (1.97 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hour Amount of material required: ~ 7.75 m (23 grams)

The Pole part:

Print Dimensions: base of the spinner part is 7 cm (2.76 inches) by 7 cm (2.76 inches), height of this part is 8.6 cm (13.39 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 42 minutes Amount of material required: ~ 4 m (12 grams)

TOTAL PRINT TIME: 2 Hours and 42 Minutes TOTAL PRINT MATERIAL: ~ 17.5 m (51 grams)


12 Likes106 DownloadsJuly 5, 2024


12 Likes106 DownloadsJuly 5, 2024