This small sculptural stand holds 4 small dried plants to form a magical little forest scene.
The holes are 1.4mm in diameter, meant for tiny stems. (2.2mm version added as well) You may use a heated needle (eg. nozzle cleaning tool) to open up the holes a bit to fit your stems.
Printing Guide
This model is printed upright and default settings will generally work, but there are two things to keep in mind: The smaller the layer height, the smoother the gentle slopes will be, so you may want to print at .12 layer height. Also, since the final part of the print is a single small cylinder, some printers may melt it too much. Make sure you have good cooling and don't use an overly high nozzle temperature. You can also print multiples at once to give the part more time to cool.
Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PLA.*
These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!.